TRAN LED WD24/6.0 Strip User Manual
- June 3, 2024
- TRAN LED
Table of Contents
TRAN LED WD24/6.0 Strip
BUILDING A FIXTURE
- Fill out the ordering code on the STRIP cutsheet, choosing “MATCH” for ILLUMINATED LENGTH (in). The strip you just created will now be fitted and installed into an extrusion. The strip and extrusion will not be equal in length; the strip will stop just short of the extrusion’s endcaps.
- Fill out the ordering code for the EXTRUSION cu sheet and choose a non-encapsulated lens (Clear, Frosted, Polar, or Diffused).
RATED
DRY
- 2″ Cutpoints
- Field Cuttable
- Lengths up to 192″
COMPATIBLE EXTRUSIONS
WET
- Enclosed in silicone sleeving
- 2″ Cutpoints
- Lengths up to 192″
COMPATIBLE EXTRUSIONS
CONNECTORS/WIRE
BARE WIRE
- 22 AWG
- Indoor/Outdoor rated
- 24″ Standard length
CONNECTOR 6″
- 22 AWG
- Indoor rated
- 6″ Standard length
CONNECTOR 24″
- 22 AWG
- Indoor rated
- 24″ Standard length
DRY BARREL
- 22 AWG
- Dry rated
- 6″ Standard length
WET BARREL
- 22 AWG
- Wet rated
- 6″ Standard length
Finish
Lumen Multiplier Formula
Bare LED Lumens x Extrusion Finish/Lens Value
Example:
527 lm/ft x 0.74 = 389.98 lm/ft
WD24/6.0 at 3000K x TORQ Extrusion in Satin with FR Lens
NOTES: Data subject to change, all data has +/- 5% tolerance
Diode free or near Diode free
- © 2022 Q-Tran Inc. All rights reserved
- 155 Hill St. Milford, CT 06460
- 203-367-8777
- sales@q-tran.com
- www.q-tran.com
Specification subject to change. Rev-03-23-22
References
- Your Name as Your Email | Hover Realnames
- LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>