TRAN LED DMX-US1 DMX Controller Instruction Manual
- June 3, 2024
- TRAN LED
Table of Contents
INSTALLATION
Accessories – DMX-US1
DMX-US1 DMX Controller
-
Install the junction box into the wall.
-
Use a flathead screwdriver to pry the baseplate as shown:
-
Screw the baseplate to the junction box in the wall firmly.
-
Connect all components and put the power adapter into the junction box. Connect DMX GND to earth GND.
-
Snap the upper portion of the touch panel into the baseplate and then snap the bottom into place.
-
Connect to power supply.
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 |
203-367-8777 |
[email protected] |
www.q-tran.com
Specification subject to change. Rev-07-28-22
References
- Your Name as Your Email | Hover Realnames
- LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
Read User Manual Online (PDF format)
Loading......