TRAN LED WAVE-RGB Q-CAP Flexible Fixtures Instruction Manual

June 8, 2024
TRAN LED

WAVE-RGB
Q-CAP Flexible Fixtures – MICRO 5 SERIES

Mounting

WSC-02: WHITE SNUG CLIP

  • For indoor/outdoor use
  • Surface mounting
  • Stainless steel/corrosion resistant
  • Discrete mounting
  • White glossy finish

MOUNTING HARDWARE

  • 4 flat screw (one provided for each clip)

  • 832 Silicone (sold separately)

MICRO5-PPS-2: PVC MOUNT CLIP

  • For indoor/outdoor use
  • Surface mounting
  • For joining seamless fixtures
  • Wire way feature
  • Off white finish
  • Can be mounted with or without
  • PPS-BRACKET (COVE FRIENDLY)
  • RGB CON6/CON24 does not fit in wireway

MICRO5-PPS-96 & MICRO5-PPS-FT: PVC MOUNT CHANNEL

  • 96″ (PPS-96) or custom length (PPS-FT)
  • For indoor/outdoor use
  • Surface mounting
  • Field modifications made easy
  • Wire way feature
  • Off white finish
  • Can be mounted with or without
  • PPS-BRACKET (COVE FRIENDLY)
  • RGB CON6/CON24 does not fit in wireway

Built in wireway:
The PPS-BRACKET allows you to create a wire way under the PPS channel without any screws interfering

MICRO5-PPS-LP-2: PVC LOW PROFILE MOUNT CLIP

  • For indoor/outdoor use
  • Surface mounting
  • Low profile mounting
  • For joining seamless fixtures
  • No wire way
  • Off white finish

MICRO5-PPS-LP-96 & MICRO5-PPS-LP-FT: PVC LOW PROFILE MOUNT CHANNEL

  • 96″ (PPS-LP-96) or custom length (PPS-LP-FT)
  • For indoor/outdoor use
  • Surface mounting
  • Low profile mounting
  • No wire way
  • Off white finish

MOUNTING HARDWARE

  • 6 Flat head screw (1 screw for every 16″)

  • 832 Silicone (sold separately)

Mounting Accessories

Q-ANGLE
(Full ordering guide and installation available for this product in the accessories section of website)

  • Offset lighting to illuminate signs, artwork, etc.
  • For indoor/outdoor use
  • Wall, ceiling, or floor mounted
  • Anodized aluminum/corrosion resistant
  • Free moving rotating head which can be locked into specific angles
  • Preset dial notches for easy adjustments from 90° to 270°

MOUNTING HARDWARE

  • Mounting Clip
  • 6-32 Fillister head screw
  • 4-40 Flat head screw
  • Drywall anchor (not provided)
  • 6- 1 ¼ ” wood screw

Q-ANGLE MUST BE MOUNTED EVERY 12″
SEE Q-ANGLE INSTALL FOR MORE INFORMATION

Rated

DRY

  • Lengths up to 191″
  • Encapsulated in polyurethane
  • NOT FIELD CUTTABLE

COMPATIBLE CONNECTORS

WET

  • Lengths up to 191″
  • Encapsulated in polyurethane
  • NOT FIELD CUTTABLE

COMPATIBLE CONNECTORS

Lens

Light Orientation

Connectors

Type

SEAMLESS

MICRO5-PPS-2

Order the PPS-2 to join two fixtures together with no visible break and order the PPS-96/PPS-FT or to support the fixtures, All seamless fixtures have CLEAR endcaps

MICRO5-PPS-LP-2

Order the PPS-LP-2 to support two fixtures together with no visible break and order the PPS-LP-96/PPS-LP-FT to support the fixture

❶ = PPS – 2
❷ = PPPS – LP – 2
❸ = PPS – 96/PPS – FT or PPS – LP – 96/PPS – LP – FT

Connectors/Wire

BARE WIRE

  • 24 AWG, 4 conductor
  • Outdoor rated
  • 24″ Standard length

CONNECTOR 6″ / CONNECTOR 24″

  • 24 AWG, 4 conductor
  • Indoor rated
  • 6″ or 24″ Standard length

© 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
Specification subject to change. Rev-09-27-21

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals