AKRAPOVIC BMW M3 Rear Carbon Fiber Diffuser Instruction Manual
- June 2, 2024
- akrapovic
Table of Contents
BMW M3 Rear Carbon Fiber Diffuser
Instruction Manual
Akrapovič Product:
Rear Carbon Fiber Diffuser for the
BMW M3 (type G80)
BMW M4 (type G82)
https://www.akrapovic.com/api/producturl?sapId=129497
BMW M3 Rear Carbon Fiber Diffuser
Congratulations on purchasing the Akrapovič product. The Akrapovič product is
made by Akrapovič d.d., Malo Hudo 8a, 1295 Ivančna Gorica, Slovenia
(“Akrapovič”).
Please read this entire installation manual carefully prior to installing and
using the Akrapovič product.
Akrapovič product should only be installed by persons skilled in car exhaust
system or other car parts installation and performance. The instructions
provided in this manual should be followed to ensure proper installation and
safe use of the Akrapovič product. Akrapovič and/or its partners shall not be
held liable for any damage or personal injury (including direct, indirect, or
consequential damage) sustained as a result of improper installation of the
Akrapovič product or its use and maintenance contrary to the instructions and
warnings contained herein.
If you have any questions regarding the installation and/or proper use of the
Akrapovič product or this manual, please contact your local Akrapovič partner.
For more information on the Akrapovič products, see the official Akrapovič
website at: http://www.akrapovic.com
GENERAL INFORMATION
Your safety is our number one priority. Please drive your car responsibly,
safely and always obey local traffic rules.
All statements made with regard to the product’s compliance are made in
respect of the product “as is”. Any modifications of the Akrapovič product or
its improper installation, use or maintenance that is not in accordance with
this Installation manual, may result in severe damage to the product, vehicle
and/or engine, as well as personal injury, and may affect the product’s
compliance with the legal requirements, such as product’s air and/or noise
emissions (as an example, the car may not be suitable for use on public roads
any longer), as well as warranty coverage.
The product may only be used in accordance with relevant laws and regulations,
including state and federal, where applicable.
Damage caused by improper installation, use and maintenance of the Akrapovič
product is not covered by the Akrapovič warranty. Please refer to the enclosed
warranty with regard to the terms of our warranty.
Technical specifications of Akrapovič products are subject to change without
notice.
COPYRIGHT AND OTHER RIGHTS NOTICE
The Akrapovič trademark, including corporate logos and emblems, are subject to
copyright as well as trademark rights of Akrapovič, its licencors, or third
persons authorizing Akrapovič to use them.
Any reproduction, technical or other manipulation, translation, or other use
of the copyright and/or trademark rights contained herein is prohibited
without the explicit prior written consent of Akrapovič. The same especially
applies to the entire contents of this manual and/or any of its parts,
including but not limited to technical specifications, instructions, graphs,
photographs, and so on included in this manual.
Akrapovič takes all copyright and other rights infringement cases under
serious consideration. If you have any reason to believe that your product is
not an original Akrapovič product, please contact our local partners or
Akrapovič at info@akrapovic.com.
SAFETY AND COMPLIANCE WARNING
PLEASE READ CAREFULLY
BEFORE REMOVING THE STOCK PARTS AND BEGINNING THE INSTALLATION OF YOUR NEW
AKRAPOVIČ PRODUCT, PLEASE MAKE SURE THAT ALL ITEMS LISTED BELOW ARE
VERIFIED:
- This manual is specific to the car indicated on the cover page, for which it is designed. Installation procedures vary depending on the type of car. Please verify that the Akrapovič product and this installation manual correspond to the type of your car.
- For exhaust system only: the exhaust system can get extremely hot during and after it is used. Make sure not to touch the exhaust system until it is completely cool. Allow the exhaust and engine to cool down before beginning installation.
- Make sure the car is securely positioned to prevent damage to yourself and other, or the car.
- Please check the parts you received against the parts list available on our website (please use the QR code on the front page or look for “schematic view” in the respective product page on www.akrapovic.com). Make sure that you have all the parts necessary for the installation of your new Akrapovič product. If any of the parts is missing, please do not proceed with uninstalling your stock parts/installing the Akrapovič product and contact the retailer where you purchased the Akrapovič product.
- For exhaust system only: every exhaust system muffler has its unique serial number, which identifies the authenticity of the product. You can find the serial number on the muffler’s sleeve. Please refer to the picture 1. Please verify that your exhaust system is an original Akrapovič product. If you have any doubts, please contact the reseller where you purchased the exhaust system or Akrapovič partners. This manual, any certificates and Akrapovič warranty apply to original products only.
GENERAL NOTE
Photographs and other illustrations in this manual are symbolic and are
intended to help represent individual steps for proper installation and use,
as well as for a general overview. The actual component parts of the Akrapovič
product may not entirely correspond to the photographs and other
illustrations.
NOISE AND EMISSION WARNINGS
General warning
Because of the world-wide distribution of Akrapovič d.d. products, neither
Akrapovič d.d. nor any of its subsidiaries make any representation that the
products comply with the air and/or noise emissions laws, or labelling laws,
of any jurisdiction. The purchasers are entirely responsible for informing
themselves of the applicable laws where the products are to be used and to
comply with those law.
Although legal compliance of Akrapovič products in a specific country should
be determined by the user, you can find some basic guidance on compliance of
your Akrapovič product with various legal requirements on the product-related
part of our website (please use the QR code on the front page or look for the
respective product page on www.akrapovic.com). For
EC and ECE type approvals, please refer to the certificate enclosed to your
product.
USA WARNING
Various U.S. states and the U.S. federal government have individual laws
regulating the use of aftermarket parts and systems, especially as those parts
and systems modify, remove, or replace original equipment catalysts. Please
consult the appropriate laws in your area before installing any aftermarket
part or system on your vehicle to ensure compliance with all applicable laws.
Neither Akrapovic d.d. nor any of their subsidiaries or the sellers of the
parts or systems make any representation that any of their parts or systems
comply with any such laws.
CALIFORNIA WARNING
California laws prohibit the use of any aftermarket part or system that
modifies, removes or replaces original equipment catalysts unless the
California Air Resources Board has issued an Executive Order regarding such
part or system or unless the part or system is exempted by being used only on
racing vehicles on closed courses. Neither Akrapovic d.d. nor any of their
subsidiaries make any representation that any of their parts or systems has
received such an Executive Order or that any of their parts or systems conform
with the racing vehicles exemption. The purchasers are entirely responsible
for informing themselves of applicable California laws and to comply with
those laws.
SYMBOLS
The following symbols are used throughout these installation instructions:
| TOOLS AND PROTECTIVE EQUIPMENT REQUIRED
---|---
| LUBRICATION
| INSTALLATION TIP
| TIGHTENING TORQUE
| HAND TIGHTEN
| CAUTION OR IMPORTANT
| USE BOLT SEALANT
Apply 3 to 4 small drops of bolt sealant onto the cleaned and decreased
threads before tightening the bolts.
WARNING! Avoid contact with skin, eyes and mucous membranes. Do not
inhale fumes. Keep out of reach of children.
| USE ANTI-SEIZE LEAD-FREE COPPER PASTE (black tube)
Provides trouble-free and long-lasting protection against seizing, corrosion
and rusting of bolts, threaded ends, nuts, joints, etc. Also protects against
vibration, wear and impact. WARNING! Avoid eye contact. Keep out of reach of
children.
| USE ANTI-SEIZING GREASE (white tube)
Prevents seizing, corrosion and excessive wear between the titanium
components.
WARNING! Avoid eye contact. Keep out of reach of children.
Tools & equipment
- Mechanic gloves
- Eye protection
- Flat screwdriver
- Vehicle trim removal tool
PARTS LIST
The packaging box should contain one or more of the following items:
- Akrapovič product
- Homologation certificate/compliance documents if applicable
- Warranty
- Fitting material
- Installation Manual
Detailed list of parts can be found on the Akrapovič website (please use the QR code on the front page or look for “Schematic view” in the respective product page on www.akrapovic.com).
IMPORTANT: The car should be in the off position throughout the
dismounting and installation process, as well as any other work done on the
Akrapovič product!
REMOVAL OF STOCK EXHAUST SYSTEM OR OTHER VEHICLE’S STOCK PARTS:
The process of uninstalling the original exhaust system or other parts may
vary depending on the existing exhaust system or other vehicle parts. Please
follow the original vehicle manufacturer’s workshop manual for uninstalling
the original exhaust system or other parts.
If you for any reason decide otherwise, please note that any information
provided in this respect herein should be considered as general information
provided for your convenience only. Akrapovič shall not assume any liability
or responsibility with regard to uninstalling your existing exhaust system or
other parts, warranty coverage of such exhaust system or other parts vehicle
or their further fitness for use.
In case your Akrapovič exhaust system or other vehicle parts may not be used
on certain roads or under certain conditions, please keep the stock (or other)
exhaust system or other parts that you can use in such circumstances legally.
INSTALLATION OF THE AKRAPOVIČ DIFFUSER:
Put the vehicle onto a car lift.
CAUTION: ensure that the car is lifted safely and properly in order to avoid
the risk of vehicle damage, injury, or even death!
-
Undo the marked diffuser’s fasteners and carefully remove the towing hook cover (F 01, 02).
CAUTION: make sure not to injure yourself or damage any part of the vehicle during this process!
-
Carefully remove the two part diff user’s upper lip (F 03, 04).
IMPORTANT: check the vehicle manufacturer workshop manual for correct upper lip removal!
CAUTION: make sure not to injure yourself, damage the bumper or upper lip during this process!
-
Carefully remove the diffuser (F 05).
IMPORTANT: check the vehicle manufacturer workshop manual for correct diffuser removal!
CAUTION: make sure not to injure yourself, damage the bumper or diffuser during this process!
-
Carefully remove the cover’s lip (F 06).
CAUTION: make sure not to injure yourself or damage the cover during this process!
-
Attach the Akrapovič carbon fibre diffuser onto the bumper; make sure, that all hooking pins, correctly hook to the bumper’s fasteners (F 07, 08, 09).
CAUTION: make sure not to injure yourself, damage the bumper or diffuser during this process!
-
Attach the diffuser onto the bumper, using stock fasteners (F 10).
CAUTION: make sure not to injure yourself , damage the bumper or diffuser during this process!
-
Carefully install the Akrapovič carbon fibre cover’s lip; make sure, that hooking pins correctly hook to the cover’s fasteners (F 11, 12).
CAUTION: make sure not to injure yourself or damage the cover during this process!
-
Reinstall the towing hook cover back onto the bumper (F 13).
CAUTION: make sure not to injure yourself or damage the cover during this process!
-
Correctly installed Akrapovič diffuser (F 14).
FINAL INSTALLATION:
IMPORTANT: reinstall the dismounted or partially removed stock parts
(wheel arches, bumper etc.); check vehicle manufacturer workshop manual for
correct procedures and tightening torques.
IMPORTANT: make sure all the nuts and bolts are sufficiently tightened. In
case the Akrapovič product touches the cowling or other parts, repeat the
adjustment of theproduct or contact your authorized dealer.
IMPORTANT: clean all Akrapovič product’s surfaces before the first start
of the engine or the stains will burn onto the surfaces!
MAINTENANCE OF THE AKRAPOVIČ PRODUCT:
- Clean all Akrapovič product’s surfaces. Cleaning will prevent spots from burning onto the surface. Do not use aggressive chemical cleaners, because they can damage the surface:
• Titanium surfaces (titanium muffler’s outer sleeve, titanium pipes etc): use a soft cloth sprayed with a multi-purpose spray lubricant (WD-40® or equivalent)*, then wipe with a soft dry cloth.
• Carbon-fibre surfaces (carbon-fibre outlet cap, carbon-fibre muffler’s outer sleeve, carbon-fibre bracket etc): use a soft dry cloth sprayed with all purpose foam cleaner, then wipe with a soft dry cloth.
• Painted surfaces (painted outlet cap, painted muffler’s outer sleeve, painted bracket etc): use a soft cloth sprayed with all purpose foam cleaner, then wipe with a soft dry cloth.
• Chrome plated surfaces (chrome plated outlet cap, chrome plated muffler’s outer sleeve etc): use a soft cloth sprayed with all purpose foam cleaner, then wipe with a soft dry cloth.
• Stainless steel surfaces (stainless steel muffler’s outer sleeve, stainless steel pipes etc): use a soft cloth sprayed with a contact cleaner, then wipe with a soft dry cloth.
- WD-40® is a trademark of the WD-40 Company. 2. Periodically check if all the Akrapovič product’s nuts and bolts are sufficiently tightened.
IMPORTANT: IT IS NORMAL FOR WHITE SMOKE TO COME OUT OF THE MUFFLER AT
FIRST OPERATION.
CAUTION: DO NOT STAND BEHIND THE MUFFLER AT ANY TIME.
IMPORTANT: DO NOT USE AUTOMOTIVE WHEEL CLEANERS OR ANY CLEANING PRODUCTS
WHICH CONTAIN ACIDIC ADDITIVES TO CLEAN THE AKRAPOVIČ EXHAUST SYSTEMS.
IMPORTANT: WE RECOMMEND HIGH CAUTION WHEN USING POWER/PRESSURE WASHER FOR
CLEANING PAINTED/LACQUERED SURFACES OF THE AKRAPOVIČ COMPONENTS, TO AVOID
PAINT/LACQUER DAMAGE.
IMPORTANT: SOME OF THE AKRAPOVIČ CARBON FIBRE COMPONENTS ARE ADDITIONALLY
PROTECTED AGAINST ROCK CHIPS WITH CLEAR LACQUER PROTECTION FILM. THE
PROTECTION FILM IS AVAILABLE AS SPARE PART BY AKRAPOVIČ COMPANY. THE
PROTECTION FILM IS NOT THE SUBJECT OF THE AKRAPOVIČ WARRANTY.
IMPORTANT: ALL AKRAPOVIČ PRODUCTS ARE DEVELOPED AND DESIGNED TO BE USED ON
SPECIFIC VEHICLES, FOR THEIR ENTIRE EXPECTED LIFETIME. PLEASE MAKE SURE THAT
END-OF-LIFE AKRAPOVIČ PRODUCT IS DISASSEMBLED TO COMPONENTS SHOWN IN THE
PRODUCT’S SCHEMATIC DIAGRAM AVAILABLE ON THE AKRAPOVIČ WEBSITE AND EACH
COMPONENT SCRAPPED RESPONSIBLY AND ACCORDING TO APPLICABLE LOCAL LAWS AND
REGULATIONS. AKRAPOVIČ DOES NOT ASSUME ANY OBLIGATION OR RESPONSIBILITY WITH
RESPECT TO THE SCRAPPING PROCESS OR PROVIDING INFORMATION RELATED THERETO.
CAUTION: THE EXHAUST SYSTEM CAN BE EXTREMELY HOT. ALLOW THE EXHAUST AND
ENGINE TO COOL DOWN BEFORE BEGINNING INSTALLATION OR ANY OTHER WORK ON THE
EXHAUST SYSTEM. THIS MANUAL IS SPECIFIC TO THE BMW M4 TYPE G82. THERE MAY BE
SOME DIFFERENCES IN INSTALLATION PROCEDURES FOR OTHER MODELS.
www.akrapovic.com
D249.1.00.0000 D
Version 1.0
09/2021