GUCCI YA136208 Dive Mens Watch User Guide
- June 4, 2024
- GUCCI
Table of Contents
GUCCI YA136208 Dive Mens Watch
WARRANTY AND MAINTENANCE GUIDE
Gucci offers an international warranty of minimum 2 years for its timepieces,
valid from the date of purchase. The warranty is valid once duly completed and
activated on the official Gucci warranty web application upon purchase. The
warranty covers any fault arising from defective parts or a manufacturing
defect. It does not under any circumstances cover battery changes, damage or
faults caused by an accident, inappropriate use or negligence, or damage
caused by normal wear of the watch or one of its components. The status of the
warranty can be checked at any time on the following website:
watchwarranty.gucci.com
Care and maintenance
For any maintenance or repair operation, your Gucci watch must only be
entrusted to one of our stores, an approved agent or be sent to the nearest
service center. You are advised to clean your watch regularly with a soft
cloth. Avoid leaving it in places exposed to great temperature or humidity
variations, sunshine or intense magnetic fields. We recommend having your
watch’s water resistance tested by a Gucci service center once a year or after
an impact.
Diamond quality
The diamonds used on our products are from legitimate sources, as per “the
Convention of the International Labour Organization”.
Protecting the environment
Spent watch batteries and components must not be disposed of in the rubbish
bin, but be recycled properly, in accordance with current national laws.
DISPLAY AND FUNCTIONS
General
INSTRUCTIONS: GENERAL
Display and functions
- Seconds hand *
- Minute hand
- Hour hand
- Date *
- Central seconds hand
- 30 minute counter
- 1/10 second counter
- Moon phase
- Second time zone hand
Crown and push-buttons
- Manual movement winding *
- Date correction (and time zone for GMT)
- Time setting
- A Push-button *
- B Push-button *
Setting the time (and time zone for GMT)
Pull out the crown to position III, and turn it clockwise or anti-clockwise to
the desired time. On certain models with seconds hands, if the crown is pulled
out to position III, the seconds hand will stop. Once the time is
synchronized, push the crown back into position I (and retighten it if you
have a model with a screwed crown). To set the time zone for GMT, pull out the
crown to position II and turn it clockwise to the desired time.
Quick date correction
Pull out the crown to position II and turn it clockwise until the desired date
is displayed (for GMT model, turn it anti-clockwise). Push the crown back into
position I.
Make sure that the date changes at midnight, and not at midday. NB: do not
correct the date or day between 8 p.m. and 2 a.m. because this may damage the
movement.
Automatic watch
Automatic watches draw their energy from an oscillating weight activated by
the natural movements of your wrist. This winds the watch. Depending on the
model, the power reserve is around 40 hours. If the watch has stopped (e.g. if
it has not been worn for a long time or in case of limited activity), it must
be wound manually with the crown in position I.
Note: the accuracy of the time is influenced by how the watch is worn.
Moon phase function
The moon phases are displayed by a rotating disk which can be seen through an
aperture on the dial. It indicates whether the moon in the sky above is
waxing, full, waning, or new.
GMT function
The GMT (Greenwich Mean Time) function enables two time zones to be displayed
simultaneously: the first time zone is shown by the two main hands of the
watch. The second time zone is shown by a specific hand. The bezel can be
turned to set the city of the second time zone at noon.
Chronograph function
The chronograph function is used for measuring a short time period from 1/10
second up to 30 minutes. Timing is always carried out with the crown in
position I.
Push-button A: start – stop, read elapsed time
Push-button B: reset chronograph hands
Display and functions
- World time: hour
- World time: minute
- Date
- Day of the week
- Local time: minute
- Local time: hour
- DST indicator for local time
- Alarm activated indicator for local time
- 12/24 hour indicator for local time
- Local time indicator
- City code for world time
- DST indicator for world time
- 12/24 hour indicator for world time
Basic setting: I-Gucci
To make any setting, hold down the push-button A for at least two seconds to set a sequence. Press push-button B to proceed to the next sequence. Scroll through the world time city codes by pressing push-button A. Press push-button B to validate and continue setting with world time DST, local city and local time DST indicator, hour, minute, seconds, year, month, day and 12/24 hour indicator. Please note that the time zones are correct at the time of production, but that some countries may change their time zone subsequently.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>