SIRIO antenna SPO 868-915-6 dBi Antenna Base Instruction Manual
- June 2, 2024
- SIRIO antenna
Table of Contents
SPO 868-915-6
Base Station Antenna ISM LoRa 868 MHz & 915 MHz bands
Instruction Manual
DESCRIPTION
Base station antennas conceived for ISM LoRa systems working on 868 MHz & 915
MHz.
The radiant colinear dipoles are made of PCB and protected by a strong
fiberglass tube.
SPO 868-915-6 are aviable in 2 versions: N-f connector (fitted at the bottom)
or supplied with 5m Low Loss cable directly connected and SMA-male (other type
on request).
SPECIFICATIONS
Electrical Data| SPO 868-915-6
N-f connector| SPO 868-915-6
cable version
---|---|---
Type| 3 x 1/2 ) Colinear
Frequency Range @ SWR 1.5| 868 – 915 MHz
Impedance| 50 Ω
Antenna detection DC resistance| on request
Radiation (H-plane)| 360° omnidirectional
Radiation (E-plane) Beamwidth @ -3 dB:| 23°
Radiation angle deg.| 0°
Polarization| Linear Vertical
Gain| 3.7 dBd, 5.8 dBi
Max Power (CW) @ 30°- C| 20 Watts
Cable Type / Length| /| White Low Loss cable / 5m 16.4 It
Connector| N-female, gold plated central pin| SMA-male, other type on request
Mechanical Data
Housing & Radome Material| Fiberglass, PCB, Anodized aluminium, Nickel plated
brass
---|---
Bracket & Hardware Material| Aluminium, Stainless steel, Zinc plated steel
Wind Load @ 150 Km/h,93 mi/h| 36 N
Wind Resistance| 140 Km/h, 87 mi/h
Wind Surface| 0.028 m2; 0.3 ft2
Height (approx.)| 840 mm, 2.75 ft
Weight (without bracket, approx.)| 460 gr, 1.9 lb I| 560 gr, 2.1 lb
Operating Temperature| -40 °C to +80 °C
Installation type| Mast: Ø 35-52 mm, Ø 1.4-2.0 inch with U-bolt
Wall: mounting screws (not included)
MOUNTING INSTRUCTIONS
Standard Mounting Bracket
Spare parts: P/N SA285
Materials: extruded aluminum
Hardware: stainless & zinc plated steel
Dimensions : 80 x 76 x 65 mm
Weight: 363 gr
Part list
| Q. ty | Description |
|---|---|
| 1 | Extruded aluminium bracket |
| 2 | M8x200 U-bolt |
| 4 | M8 Grower washer |
| 4 | M8 Hexagonal nut |
| 2 | M6x20 Hexagonal head screw |
| 2 | M6 Grower washer |
| 2 | M6 Hexagonal nut |
HI-QUALITY ANTENNAS MADE IN ITALY
B Copyright SIRIO antenne
– Technical Data are subjected to change
– Printed in ITALY
– Rev. 05/12/2019
– Cod. ID465