AudioVolt LITHEAUDIO WiFi Ceiling Speaker Instruction Manual

www.audiovolt.co.uk
Dedicated expert TECHNICAL SUPPORT
before & after your purchase

Purchase from us and receive a
FREE EXTENDED 3rd YEAR WARRANTY
Instruction Manual

LITHEAUDIO WiFi Ceiling Speaker

THANK YOU FOR
CHOOSING LITHE AUDIO
Innovative design and advanced engineering are built in to our wireless Wi-Fi ceiling mount speakers. Designed for easy installation and high quality sound, within seconds each room is setup and ready. This manual describes the installation of the speakers within conventional stud and sheetrock (Joist and plasterboard) ceilings.

IMPORTANT SAFETY WARNING

BEFORE USE PLEASE READ COMPLETELY AND USE THE PRODUCT IN ACCORDANCE WITH THESE SAFETY INSTRUCTIONS.
Before commencing any electrical work ensure the supply is switched OFF at the mains. Either by switching off the consumer unit or by removing the appropriate fuse. This product should be installed in accordance with the relevant sections of the building regulations code and in accordance with the latest edition of IEE regulations (BS 7671).
If the unit is to be used as a replacement for an existing product, remove the existing unit from its location and disconnect the wiring. Connect the wires as shown in diagram. Ensure terminals are properly tightened and ensure no bare wires are visible. When fitting the speaker into the ceiling, ensure no wires are trapped.
READ THE INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION PROCESS AND KEEP THEM SAFE FOR FUTURE REFERENCE.

• Failure to follow the instructions in this guide voids all warranties on your speakers.
• Warning: Do not use the product in water.
• Warning: Do not install speaker directly above any heat sources such as radiators, or other apparatus that produce heat.
• Warning: To reduce the risk of fire or electric shock, do not expose this speaker to rain or moisture (directly above bath or shower area) or in Bathroom Zone 0 or Zone 1.
• Protect the power cable from being damaged, do not over stretch cable.
• Only use attachments/accessories specified by the manufacturer Lithe Audio.
• Turn off the power to the speaker when unused for long periods of time.
• A Fire and Acoustic speaker hood must be used in accordance with UK building and IEE Regulations with a fire rating of up to 60 minutes, is Parts B, L, C and E compliant.
• Do not open the back cover to the speaker as this protects the PCB as this will invalidate the warranty and could cause electric shock.
• Ensure speaker location is free from obstructions such as electrical conduit, HVAC ducts or Water lines.

USA REGULATIONS
BEFORE USE PLEASE READ COMPLETELY AND USE THE PRODUCT IN ACCORDANCE WITH THESE SAFETY INSTRUCTIONS.
The Power adaptor (supplied) should not be placed in a dead space such as a wall or ceiling. In accordance with US National Electrical Code. A DC extension cable must be used in conjunction with the power adaptor supplied and placed inside / on top of cabinet or anywhere where you have accessibility. (Each situation is unique to the install, consult your local building codes or contact Authorized Dealer or Installer)
If the unit is to be used as a replacement for an existing product, remove the existing unit from its location and disconnect the wiring. Connect the wires as shown in diagram. Ensure terminals are properly tightened and ensure no bare wires are visible. When fitting the speaker into the ceiling, ensure no wires are trapped.
READ THE INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION PROCESS AND KEEP THEM SAFE FOR FUTURE REFERENCE.

• Failure to follow the instructions in this guide voids all warranties on your speakers.
• Warning: Do not use the product in water.
• Warning: Do not install speaker directly above any heat sources such as radiators, or other apparatus that produce heat.
• Protect the power cable from being damaged, do not over stretch cable.
• Only use attachments/accessories specified by the manufacturer Lithe Audio.
• Turn off the power to the speaker when unused for long periods of time.
• A Fire and Acoustic speaker hood must be used in accordance with UK building and IEE Regulations with a fire rating of up to 60 minutes, is Parts B, L, C and E compliant.
• Do not open the back cover to the speaker as this protects the PCB as this will invalidate the warranty and could cause electric shock.
• Ensure speaker location is free from obstructions such as electrical conduit, HVAC ducts or Water lines.

BOX CONTENTS

Please ensure you read the entire instruction manual carefully before you commence any work. Carefully unpack the speakers from the packaging. Please check to ensure all the parts shown below are included.
If any parts of the speaker appear damaged, please contact your dealer/reseller immediately or contact www.Litheaudio.com for contact details.

PREPARATION EQUIPMENT YOU WILL NEED
Listed below is the hardware equipment needed to install the speaker, with the addition of a ladder to ensure the installation is done safely. A cutting template is included in the box.

KNOW YOUR SPEAKER

The Lithe Audio LWF1V2 range of Wi-Fi ceiling wireless speakers have various inputs and outputs:
SPEAKER OUTPUT – To connect one additional passive (Slave) speaker (Gold Plated)
RCA INPUT – To connect directly from existing Hi-Fi equipment
POWER INPUT – To connect (as supplied) transformer

In built over voltage, under voltage, over temperature, and short circuit protection, if there is an electrical fault, the power supply to the amplifier will cut off automatically and restart when the speaker has stabilised.

SPEAKER PLACEMENT

IMPORTANT: BEFORE COMMENCING ANY WORKS, DETERMINE YOUR PRIMARY LISTENING POSITION. IF YOU ARE UNSURE SEEK HELP FROM AN AV INSTALLER FOR OPTIMUM RESULTS.
2 SPEAKER PLACEMENT
In an ideal scenario, the two speakers should be spaced equally apart from the primary listening position. Where possible, place the speakers approx 3” / 1m from the wall

4 SPEAKER PLACEMENT
Ideally, the two speakers to the front and two speakers to the rear should be spaced equally apart from the primary listening position to provide balanced listening experience. Where possible, place the speakers approx 3” / 1m from the wall.

NOTE: For optimal sound when using speaker in vaulted ceilings switch the environmental equaliser switch to +3dB, when using speakers in a tiled environment (Bathroom) switch equaliser to -3dB.

INSTALLATION

IMPORTANT: BEFORE COMMENCING ANY ELECTRICAL WORK ENSURE THE SUPPLY IS SWITCHED OFF AT THE MAINS. IF YOU ARE UNSURE HOW TO FIT SEEK HELP FROM A PROFESSIONAL ELECTRICIAN / AV INSTALLER

1. Mark out the position of the speaker using a tape measure and mark using a pencil with the template supplied. Check using a stud finder to make sure no obstruction is present prior to cutting.
2. Drill a pilot hole and cut the speaker hole using a cutting saw. Take caution when cutting to keep fingers away from cutting blade and wear protective eyewear.
3. Connect the power lead from the transformer (supplied) to a 13A mains plug socket or terminate to a dedicated 3A fused spur. Ensure the power lead is not overstretched.
4. Insert speaker into the ceiling then using a screwdriver lock the 4 dog leg fixings to secure the speaker in place, do not over tighten. Attach the magnetic grille to the speaker front.
   

PAINTING THE SPEAKER GRILLE
Do not paint the speaker grilles whilst attached to the speaker. Lithe Audio recommends spray painting using 5 parts thinning agent to 1 part paint. Spray thinly to ensure speaker cover grille holes are not blocked as this will effect the sound quality of the speakers.
INSTALLATIONS IN FIRE-RATED CEILINGS
If you plan to mount your speakers in a fire-rated ceiling, you should purchase a fire hood for the speaker. Visit www.litheaudio.com for more information and recommended hoods.
INSTALLATION USA
IMPORTANT: BEFORE COMMENCING ANY ELECTRICAL WORK ENSURE THE SUPPLY IS SWITCHED OFF AT THE MAINS. IF YOU ARE UNSURE HOW TO FIT SEEK HELP FROM A PROFESSIONAL ELECTRICIAN / AV INSTALLER

1. Mark out the position of the speaker using a tape measure and mark using a pencil with the template supplied. Check using a stud finder to make sure no obstruction is present prior to cutting.
2. Drill a pilot hole and cut the speaker hole using a cutting saw. Take caution when cutting to keep fingers away from cutting blade and wear protective eyewear.
3. To meet the NEC code for this type on install, connect the DC extension cable to power adaptor and place power adapter inside/ on top of cabinet or anywhere youhave easy access.
4. Insert speaker into the ceiling then using a screwdriver lock the 4 dog leg fixings to secure the speaker in place, do not over tighten. Attach the magnetic grille to the speaker front.

PAINTING THE SPEAKER GRILLE
Do not paint the speaker grilles whilst attached to the speaker. Lithe Audio recommends spray painting using 5 parts thinning agent to 1 part paint. Spray thinly to ensure speaker cover grille holes are not blocked as this will effect the sound quality of the speakers.
INSTALLATIONS IN FIRE-RATED CEILINGS
If you plan to mount your speakers in a fire-rated ceiling, you should purchase a fire hood for the speaker. Visit www.litheaudio.com for more information and reccomended hoods.

YOUR HOME WI-FI NETWORK

To enable the Lithe Audio Wi-Fi ceiling speakers, your device must be on the same network.

• Ensure your network has a high speed internet connection, as the speakers are designed to provide you with free online software/firmware updates.
• High speed DSL / cable modem, or fiber to the home broadband is recommended for best possible playback of music services.
• Lithe Audio communicates over a 2.4GHz & 5GHz Wi-Fi home network supporting 802.11 a, b, g, n, ac wireless technology only.
• For larger homes where Wi-Fi signal is not stable, we suggest adding access points/mesh network to strengthen the network or updating your router to a higher specification model to suit the demand.

LITHE AUDIO APP

• To enhance your listening experience download Lithe Audio app via the app store on your device follow the setup procedures within this instruction manual.
• The app will allow you to setup singular rooms, groups of speakers or play in Party Mode.
• You can connect multiple speakers simultaneously and control them all from the app.

STATUS INDICATOR LIGHT

Located on the front face of the speaker, the LED Indicates the status of your speaker:

• Red solid: Speaker booting up
• Red quick flash (1s 4 times): Speaker under restart operation
• Red slow flash (3s 1 time): Speaker under standby mode, waiting for user operation
• Green solid: Speaker is active and connected to Wi-Fi
• Blue Solid: Bluetooth speaker connected
• Green slow flash(1s 1 time): Speaker trying to connect to the preconfigured Wi-Fi
• Solid purple: Speaker under RCA mode
• Green quick flash(1s 4 times): Speaker in WAC/SAC mode, user to configure Wi-Fi

CONNECTING TO BLUETOOTH

1. Open the setting menu and select Bluetooth
2. Turn on Bluetooth and search devices
3. Click Lithe Audio Speaker to connect and pair to the speaker.

SETUP FOR APPLE IOS

http://www.litheaudio.com/app

1. Ensure the Wi-Fi speaker is connected to the power supply and is turned on, The LED indicator light will be red.

2. Press and hold the ‘Connection Reset Button’ for 10 seconds & release, the LED indicator will fl ash Green fast and the speaker is now ready to connect to your Wi-Fi network.
   3. Open the Wi-Fi setting menu on your phone or tablet
   4. Select the new AirPlay speaker listed you would like to add to your network

3. Select your network and change the ‘Speaker Name’ to something easily identify e.g. Kitchen and click Next

4. The Lithe Audio Wi-Fi speaker setup is now complete, return to the Lithe Audio app

  AirPlay PLAY VIA IOS
To play directly to speaker(s) using a iOS devices (iPad, iMac, iPhone, Apple TV etc) you can connect via AirPlay. Please follow the steps below:
ENSURE THE SPEAKER IS CONNECTED TO THE POWER SUPPLY, AND THE WIFI NETWORK.
Note: When using AirPlay the Lithe app grouping and playback functions for multiple speakers becomes redundant. The ability to play any source is is now possible. As well as playing with other brands in an multi room environment.

1.  Swipe down from the top right of the screen

2. Click on the right corner icon to show available AirPlay devices

3. Audio display screen shall show available devices to play music through as per list

4. Select the speaker(s) to play music through open any app and play your music

 Use of the Works with Apple badge means that an accessory has been designed to work specifi cally with the technology identifi ed in the badge and has been certifi ed by the developer to meet Apple performance standards. To control this AirPlay–enabled speaker, iOS 11.4 or later is required. Apple, iPad, iPad Air, iPad Pro, iPhone and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries.

SETUP FOR GOOGLE HOME

1. Download the Google Home app from thhe Google Play store
2. Ensure the Wi-Fi speaker is connected to the power supply and is turned on, The LED indicator light will be red.
3. When the LED indicator blinks green quickly press the + top left hand corner, Click set up device, choose home to start looking for devices on your network, choose Speaker, Next.
4. Open Google Home and click the + sign top left hand corner
5. Click set up device, New devices Setup new device
6. Select existing home or create new home to start looking for devices
7. Select speaker, Next, click on Lithe Audio Speaker all set.

 Chromecast Built-in

To play directly to speaker(s) using Google Cast. Please follow the steps below:
ENSURE THE SPEAKER IS CONNECTED TO THE POWER SUPPLY, AND THE WIFI NETWORK.
Note: When using Google Cast the Lithe app grouping and playback functions for multiple speakers becomes redundant. The ability to play any source is is now possible.
As well as playing with other brands with Google Cast built in within an multi room environment.

1. To group speakers, click +, create speaker group
2. Click on the speakers you want to group, next, name group
3. Audio display screen shall show available devices to play music through as per list
4. Select the speaker to play music through and press play on your source player

SPOTIFY CONNECT

Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.
The Spotify Software is subject to third party licenses found here: www.spotify.com/connect/third-party-licenses.

HARD WIRED INPUT- RCA

To connect other devices such as CD player, BluRay player etc) to play through the Wi-Fi speakers please follow the steps below:
RCA Connection:
To play music via speaker RCA connection connect an RCA cable to the speaker and play through your device. Within the Lithe Audio App click on source to activate RCA to be able to play through the speaker.
Note: To ensure the best possible sound without humming or noise, we recommend a shielded RCA cable be used.

CREATE STEREO PAIR

PLEASE NOTE: LWF1V2 DOES NOT INCLUDE PASSIVE SPEAKER
The Lithe Audio Master Wi-Fi ceiling speaker is able to connect to and power an additional passive speaker via the Right speaker output.
Use wire cutters to strip the ends of the speaker cable (if required).
SPEAKER

• Sound Quality THD+N<0.009%, 55Hz-20kHz (+/- 3dB)
• RMS Power: 60W RMS (2x 30W)
• Impedance: 8 Ohms nominal
• Sensitivity (1W/1m): 90dB
• Line In Analog (RCA), auto-detecting
• Type: Class D (Digital)
• Audio Compression: 192kHz 24bit
• Woofer: 6.5” Woven Glass Fiber cone / Polypropylene Cone (IP44)
• Tweeter: 0.75” Titanium Cone

MUSIC ACCESS

• Audio Formats Supported: MP3, WMA, AAC (MPEG4), AAC+, ALAC, FLAC, APE, WAV, OGG, LPCM
• Audio Sample Rate: up to 192kHz 24bit
• Music Services Supported by Lithe Audio include; Airable Radio, Podcast, Tidal, Deezer, Soundmachine, Amazon Music, Napster, Spotify, etc..
• Operating Systems (for stored files) Windows XP SP3 and higher; Mac OS X 10.6.8 and higher; NAS (network- attached storage) devices supporting CIFS

MULTI ROOM

• Group speakers within same Wi-Fi network

WIRELESS NETWORKING

• Wi-Fi Connectivity: Wi-Fi CERTIFIED™ 802.11 a, b, g, n, ac WPA™ – Personal WPA2™ – Personal WMM®, Wi-Fi Protected Setup™
• Wireless connectivity works on your home Wi-Fi network with both 2.4GHz/5GHz broadcast routers
• Internet connection required for access to Internet radio stations, online music services and software updates.

GENERAL

• Power Input Supply : 100 – 240V, 50/60Hz / 2A
• Transformer Output Supply : DC24V / 2.5A
• Dimensions (W x D) 230 x 110mm (6.5 x 4.3 in)
• Weight 1.75kg (3.85 lbs)
• IP rating: IP44 (Bathroom models only)
• Operating Temperature 0º to 40º C (32º to 104º F)
• Storage Temperature -20º to 70º C (4º to 158º F)
• Standby power: 1.3W / 0.02A
• Connected power: 1.5W / 0.03A
• Playing Music: 2.8W – 10.5W / 0.03A – 0.09A**

*  Specifications subject to change without notice.
** Power Consumption depends on the type of music & volume
– Increased Bass & volume requires more power loading on the amplifier.
– Internet functionality may require payment of separate fee to a service provider.

TROUBLESHOOTING

Q: Speaker has not been found during setup****

– A: Please check power cord is correctly connected into speaker and transformer, Check the red light is ON. Press reset button for 5 seconds on the speaker (discoverable mode), green light shall flash, follow the instructions for Android or AirPlay setup.
– *Before commencing any electrical work ensure the supply is switched OFF at the mains.

Q: Speaker connected to AirPlay but not playing through device****

– A: Please ensure device has good Wi-Fi strength and battery power, check the led indicator is solid green, if not press reset button for 3 secs. Failing this, turn the speaker power off then on.

Q: Device is connected to Wi-Fi speaker but no sound****

– A: Ensure your device volume is NOT muted, increase the volume within app and try again.
– Restart the app which the audio is playing from and try again.

Q: Lithe Audio App not showing connected speakers****

– A: Ensure your speakers green light are on, and connected as per setup. The app shall automatically find active speakers, if not, restart app or press reset on speaker for 3 secs to wake speaker. to show green status light.

Q: Lithe Audio App not working correctly****

– A: Ensure your speaker firmware/app are up to date, OR restart/reinstall app fully.

Q: Can the speaker be installed into the bathroom ceiling.****

– A: The IP rated models can be installed in zone 2 or 3 of a bathroom. Ensure you read the saftey precautions before installation.
– Warning: Do not use the product in water or directly above the bath or shower area.

Q: I have a new router and speakers are not visible anymore****

– A: If you have purchased a new router or reset the router back to default, you shall need to install the speakers again. Please follow the setup procedures for IOS or Android.

For further queries and support questions please visit www.support.litheaudio.com email us at [email protected] or via our website’s live chat service (during working
hours)
If a problem arises, please try the troubleshooting guide below. If the problem is not listed please contact Lithe Audio Customer Service Support
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the FCC rules. these limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. however, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/tv technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (example- use only shielded interface cables when connecting to computer or peripheral devices).
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

EUROPE
Lithe Audio declares that this product herewith complies with the requirements of the EMC
Directive 2004/108/EC, Low Voltage directive 2006/95/EC, Eco-Design Directive 2005/32/EC,
RoHS Directive 2011/65/EU and the R&TTE Directive 1999/5/EC when installed and used in accordance with the manufacturer’s instructions. A copy of the full Declaration of Conformance may be obtained at www.litheaudio.com/support/policies.
Lithe Audio Speakers have a standby mode or remove the power cord from the AC mains.

REGULATION INFORMATION

RECYCLING INFORMATION
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead please deliver it to the applicable collection point for the recycling of electrical and electronic equipment. By recycling this product correctly, you will help conserve natural resources and prevent potential negative environmental consequences. For more detailed information about recycling of this product, please contact your local council offi ce, your household waste disposal service or the shop where you purchased the product(s) from.
THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, information retrieval systems, or computer network without the written permission of Lithe Audio Ltd
Use of the Works with Apple badge means that an accessory has been designed to work specifi cally with the technology identifi ed in the badge and has been certifi ed by the developer to meet Apple performance standards.
To control this AirPlay–enabled speaker, iOS 11.4 or later is required.
Apple, iPad, iPad Air, iPad Pro, iPhone and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries.
Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. Android™ is a trademark of Google, Inc.
Google, Chromecast built-in are trademarks of Google LLC.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Lithe Audio Ltd is under license. Other trademarks and trade names are those of their respective owners.
Wi-Fi CERTIFIED™ is a registered trademark of Wi-Fi Alliance® Spotify software is subject to third party licenses found here:
http://www.spotify.com/connect/third-party-licenses
All other products and services mentioned may be trademarks or service marks of their respective owners.
©2021 by Lithe Audio Ltd. All rights reserved.
FCC ID: 2AQOB-LWF1V2
This warranty may not be valid if the product was purchased via an un- authorised dealer.
The warranty only applies to individual that made the orginal purchase, not transferable..
The purchaser must show proof of purchase by way of receipt (hard copy or digital copy)
The warranty is null and void if:

• product altered in any way from its orginal manufactured state
• security seal has been removed
• product defaced

No one is authorised to make or modify any warranty on behalf of Lithe Audio Ltd.
2 YEAR STANDARD GUARANTEE
This Ceiling Speaker is of excellent quality and construction. However, if any defects in materials or workmanship do appear during the guarantee period, we will, at our discretion, either repair or replace the defective parts, free of charge, subject to the terms and conditions of our Guarantee shown below.
This Guarantee covers both parts and labour. Carriage is not included.
This Guarantee provides benefits which are additional to, and do not affect, your statutory rights.
This Guarantee does not cover the cost of returning the product to the dealer from whom it was purchased or to ourselves. This Guarantee applies only to products sold and located in mainland Great Britain. It does not cover liability in respect of or replacement of plugs, cables or fuses and also does not cover defects due to:

• Failure to use or maintain product in accordance with Lithe Audio instructions.
• The product being connected to an unsuitable electricity supply.
• Accidental damage to or abuse or misuse of the product.
• Product modification, except by Lithe Audio or approved agent.
• Dismantling of or interference with the product. Before returning any product under this Guarantee, please check that:
• You have followed the product instructions correctly.
• Your mains electricity supply is functional.
• The defect is not due to a blown fuse. If you wish to claim under this guarantee you should:
• Send the product, postage or carriage paid, to the dealer from whom it was purchased or to Lithe Audio direct.
• Ensure that the product is clean and packed carefully (preferably in its original carton).
• Enclose details of your name, address and telephone number and when and where the product was purchased, together with proof of purchase (e.g. a invoice or till receipt).
• Give exact details of the nature of the defect.

This Guarantee does not cover any other claims whatsoever, including, without limitation, any liability for incidental, indirect or consequential damage, nor does it cover any claims for conversion or modification or for the costs of repair carried out by any third party without the prior consent of Lithe Audio. If replacement parts are fitted to the product this will not extend the period of the Guarantee. For further advice contact the Lithe Audio customer services.

Lithe Audio products marked with the CE mark comply with the EC Low Voltage
Directive: 73/23/EEC, Electromagnetic Compatibility Directive 89/336/EEC

https://www.litheaudio.com/register-product.html

WWW.LITHEAUDIO.COM
TEL: +44 (0) 1293 922 015 EMAIL: [email protected]

References

• Spotify - Connect
• Background Music Systems & Home Audio Specialists | Audio Volt
• Wireless Audio Solutions - Lithe Audio LTD
• Third Party Licenses | Spotify for Developers

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>