Audiovolt XPA675 Rearview Camera Installation Instruction Manual
- August 28, 2024
- AudioVolt
Table of Contents
Audiovolt XPA675 Rearview Camera Installation
Product Information
Specifications
- Model: XYZ Rearview Camera System
- Power Input: 12V
- Compatibility: Works with most car models
- Components: Rearview camera, wiring harness, manual
Product Usage Instructions
Installation Steps
- Ensure the yellow tulip cable is securely connected to the camera.
- Connect the camera to a 12V power source from the reverse lights.
- If needed, use a stabilizer between the reverse light’s 12V and the camera’s input.
- If facing issues, contact customer service or email info@audiovolt.nl
Troubleshooting
If the screen does not switch to black when in reverse, check the incoming 12V on the back/reverse wire going into the radio. If the issue persists, contact customer service.
Canbus Decoder Setup
If you have a Canbus decoder, connect the 12V output from the reverse lights to the reverse/back wire. Refer to Attachment 2 for specific instructions.
FAQs
Q: Does the system switch to a black screen when in reverse?
A: Yes, ensure proper wiring and power supply for this function.
Q: How to troubleshoot flickering or striped camera images?
A: Check the yellow tulip connection and power supply to the camera. Refer to Attachment 3 for specific guidance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>