Hotpoint FA3 540 H IX HA Class 3 Built-in Oven User Guide

Hotpoint FA3 540 H IX HA Class 3 Built-in Oven

THANK YOU FOR PURCHASING A HOTPOINT-ARISTON PRODUCT

• To receive more comprehensive help and support, please register your product at www.hotpoint.eu/register
• You can download the Safety Instructions and the Use and Care Guide by visiting our website www.hotpoint.eu and following the instructions on the back of this booklet.

For technical details, please visit “Specifications and Datasheet”

Read the safety instructions carefully before using the product

PRODUCT DESCRIPTION

• 1. Control panel
• 2. Fan
• 3. Lamp
• 4. Shelf guides (the level is indicated on the wall of the cooking compartment)
• 5. Door
• 6. Upper heating element/grill
• 7. Identification plate (do not remove)
• 8. Bottom heating element (non-visible)

CONTROL PANEL

1. SELECTION KNOB

   • For switching the oven on select a function.
   • Turn to the position to switch the oven off.

2. LIGHT
   With the oven switched on, press to turn the oven compartment lamp on or off.

3. SETTING THE TIME

   • For accessing the cooking time settings, delayed start, and timer.
   • For displaying the time when the oven is off.DISPLAY

4. ADJUSTMENT BUTTONS
   For changing the cooking time settings.

5. THERMOSTAT KNOB
   Turn to select the temperature you require when activating manual functions. Automatic functions use 0/A.

ACCESSORIES

The number of accessories may vary depending on which model is purchased. Other accessories can be purchased separately from the After-sales Service.

INSERTING THE WIRE SHELF AND OTHER ACCESSORIES

• Insert the wire shelf onto the level you require by holding it tilted slightly upwards and resting the raised rear side (pointing upwards) down first. Then slide it horizontally along the runners as far as possible.
• Other accessories, like the baking tray, are to be inserted horizontally, letting them slide on the runners.

FUNCTIONS

• CONVENTIONAL *
  For cooking any kind of dish on one shelf only.

• CONVECTION BAKE
  To cook on a maximum of two shelves at the same time. It is a good idea to swap the position of the baking trays halfway through cooking.

• GRILL
  For grilling steaks, kebabs and sausages, cooking vegetables au gratin or toasting bread. When grilling meat, we recommend using a drip tray to collect the cooking juices: Position the pan on any of the levels below the wire shelf and add 200 ml of drinking water.

• TURBO GRILL
  For roasting large joints of meat (legs, roast beef, chicken). We recommend using a drip tray to collect the cooking juices: Position the pan on any of the levels below the wire shelf and add 200 ml of drinking water.

• *ECO FORCED AIR
  ** For cooking roasts and stuffed roasting joints on a single shelf. Food is prevented from drying out excessively by gentle, intermittent air circulation. When this ECO function is in use, the light will remain switched off during cooking but can be switched on again by pressing .

• BREAD AUTO
  This function automatically selects the ideal temperature and baking time for bread. For best results, carefully follow the recipe WWW. Activate the function when the oven is cold.

• PASTRY AUTO
  This function automatically selects the ideal temperature and baking time for cakes. Activate the function when the oven is cold.

• DIAMOND CLEAN
  The action of steam released during this special low-temperature cleaning cycle allows dirt and food residues to be removed with ease. Pour 200 ml of drinking water on the bottom of the oven and only activate the function when the oven is cold.

• Function used as a reference for the energy efficiency declaration by Regulation (EU) No. 65 / 2014

USING THE APPLIANCE FOR THE FIRST TIME

SETTING THE TIME

You will need to set the time when you switch on the appliance for the first time: Press until the icon and the current time start flashing on the display.

Use to set the hour and press to confirm. The two digits for the minutes will start flashing. Use  to set the minutes and press to confirm.

Please note: When the icon is flashing, for example following lengthy power outages, you will need to reset the time.

DAILY USE

SELECT A FUNCTION

To select a function, turn the selection knob to the symbol for the function you require: The display will light up and an audible signal will sound.

ACTIVATE A FUNCTION MANUAL

To start the function you have selected, turn the thermostat knob to set the temperature you require.

• Please note: During cooking you can change the function by turning the selection knob or adjust the temperature by turning the thermostat knob.
• The function will only start if the thermostat knob is on 0 °C. You can set the cooking time, cooking end time (only if you set a cooking time) and a timer.

AUTOMATIC

• To start the automatic function you have selected (“Bread” or “Pastry”), keep the thermostat knob at the position for automatic functions (0/A).
• To finish cooking, turn the selection knob to position 0.
• Please note: You can set the cooking end time and timer.

PREHEATING

• Once the function starts, an audible signal and a flashing icon on the display indicate that the preheating phase has been activated.
• At the end of this phase, an audible signal and the fixed icon on the display will indicate that the oven has reached the set temperature: at this point, place the food inside and proceed with cooking.
• Please note: Placing the food in the oven before preheating has finished may have an adverse effect on the final cooking result.

PROGRAMMING COOKING

• You will need to select a function before you can start programming cooking.

DURATION

• Keep pressing until the icon and “00:00” start flashing on the display.

• Use to set the cooking time you require, then press to confirm.

• Activate the function by turning the thermostat knob to the temperature you require: an audible signal will sound and the display will indicate that cooking is complete.

• Notes: To cancel the cooking time you have set, keep pressing until the icon starts flashing on the display,  then use – to reset the cooking time to “00:00”.

• This cooking time includes a preheating phase.

PROGRAMMING THE END COOKING TIME/DELAYED START

• After a cooking time has been set, starting the function can be delayed by programming its end time: press until the icon and the current time start flashing on the display.

• Use to set the time you want cooking to end and press to confirm.

• Activate the function by turning the thermostat knob to the temperature you require: the function will remain paused until it starts automatically after the period of time that has been calculated in order for cooking to finish at the time you have set.

Notes: To cancel the setting, switch the oven off by turning the selection knob to position “ ”.

END OF COOKING

An audible signal will sound and the display will indicate that the function has finished.

Turn the selection knob to select a different function or to position “ ” to switch the oven off.

Please note: If the timer is active, the display will show “END” alternately with the remaining time.

SETTING THE TIMER

• This option does not interrupt or program cooking but allows you to use the display as a timer, either during while a function is active or when the oven is off.

• Keep pressing until the icon and “00:00” start flashing on the display.

• Use to set the time you require and press to confirm.

• An audible signal will sound once the timer has finished counting down the selected time.

• Notes: To cancel the timer, keep pressing until the icon starts flashing, then use – to reset the time to “00:00”.

DIAMOND CLEAN FUNCTION

• To activate the “Diamond Clean” cleaning function, pour 200 ml of drinking water into the bottom of the oven, then turn the selection knob and the thermostat knob to the icon.
• Please note: The position of the icon does not correspond to the temperature reached during the cleaning cycle.
• The function will activate automatically: the display shows the time remaining to the end, alternating with “DC”.

Please note: It is only possible to programme the end time of this function. The duration is automatically set to 35 minutes.

COOKING TABLE

The time indicated does not include the preheating phase: We recommend placing the food in the oven and setting the cooking time only after the required temperature has been reached.

• *Turn food halfway through cooking
• **Turn food two thirds of the way through cooking (if necessary).
• ***Estimated length of time: Dishes can be removed from the oven at different times depending on personal preference.

Download the Use and Care Guide from www.hotpoint.eu for the table of tested recipes, compiled for the certification authorities by the standard IEC 60350-1.

MAINTENANCE AND CLEANING

• Do not use steam cleaning equipment.
  Use protective gloves during all operations.

• Carry out the required operations with the oven cold.
  Disconnect the appliance from the power supply.

• Do not use wire wool, abrasive scourers or abrasive/corrosive cleaning agents, as these could damage the surfaces of the appliance.

EXTERIOR SURFACES

• Clean the surfaces with a damp microfibre cloth.
• If they are very dirty, add a few drops of pH-neutral detergent. Finish off with a dry cloth.
• Do not use corrosive or abrasive detergents. If any of these products inadvertently comes into contact with the surfaces of the appliance, clean immediately with a damp microfibre cloth.

INTERIOR SURFACES

• After every use, leave the oven to cool and then clean it, preferably while it is still warm, to remove any deposits or stains caused by food residues. To dry any condensation that has formed as a result of cooking foods with a high water content, leave the oven to cool completely and then wipe it with a cloth or sponge.
• Activate the “Diamond Clean” function for optimum cleaning of the internal surfaces.
• The door can be easily removed and refitted to facilitate cleaning of the glass. WWW
• Clean the glass in the door with a suitable liquid detergent.
• The top heating element of the grill can be lowered to clean the upper panel of the oven. WWW

ACCESSORIES

Soak the accessories in a washing-up liquid solution after use, handling them with oven gloves if they are still hot. Food residues can be removed using a washing-up brush or a sponge.

REMOVING AND REFITTING THE DOOR

1. To remove the door, open it fully and lower the catches until they are in the unlock position.
2. Close the door as much as you can.
   • Take a firm hold of the door with both hands – do not hold it by the handle.
   • Simply remove the door by continuing to close it while pulling it upwards (a) at the same time until it is released from its seating (b).
   • Put the door to one side, resting it on a soft surface.
3. Refit the door by moving it towards the oven, aligning the hooks of the hinges with their seating and securing the upper part onto its seating.
4. Lower the door and then open it fully.
   • Lower the catches into their original position: Make sure that you lower them down completely.
5. Try closing the door and check to make sure that it lines up with the control panel. If it does not, repeat the steps above.

CLICK TO CLEAN – CLEANING THE GLASS

1. After removing the door and resting it on a soft surface with the handle downwards, simultaneously press the two retaining clips and remove the upper edge of the door by pulling it towards you.

2. Lift and firmly hold the inner glass with both hands, remove it, and place it on a soft surface before cleaning it.

3. To correctly reposition the inner glass, make sure that the “R” is visible in the left-hand corner and the clear surface (not printed) is facing up.

   • First, insert the long side of the glass indicated by “R” into the support seats (a), then lower it into position (b).

4. Refit the upper edge: a click will indicate the correct positioning. Make sure the seal is secure before refitting the door.

TROUBLESHOOTING

presence of mains electrical power and whether the oven is connected to the electricity supply.

Turn off the oven and restart it to see if the fault persists

The display shows the letter “F” followed by a number| Software problem| Contact you nearest After-sales Service Centre and state the letter or number that follows the letter “F”

USEFUL TIPS

HOW TO READ THE COOKING TABLE

The table lists the best functions, accessories, and level to use to cook various types of food. Cooking times start from the moment food is placed in the oven, excluding preheating (where required). Cooking temperatures and times are approximate and depend on the amount of food and the type of accessory used. Use the lowest recommended settings to begin with and, if the food is not cooked enough, then switch to higher settings. Use the accessories supplied and preferably dark-colored metal cake tins and baking trays. You can also use Pyrex or stoneware pans and accessories, but bear in mind that cooking times will be slightly longer.

COOKING DIFFERENT FOODS AT THE SAME TIME

• The “Convection Bake” function enables you to cook different foods (such as fish and vegetables) on different shelves at the same time.
• Remove the food that requires a shorter cooking time and leave the food that requires a longer cooking time in the oven.

BREAD AUTO FUNCTION

• For best results you should carefully follow the instructions, using the recipe for mixing 1000 g of dough: 600 g of flour, 360 g of water, 11 g of salt, 25 g of fresh yeast (or two packets of yeast powder).
• For optimal rising, allow about 90 minutes at room temperature.
• Put the dough into the (cold) oven, pour 100 cc of cold drinking water onto the bottom of the oven, and activate the “Bread Auto” function. After cooking, leave the dough to stand on a wire shelf until completely cooled.

TECHNICAL DATA

• WWW A complete specification for the product, including the energy efficiency ratings for this oven, can be downloaded from our website www.hotpoint.eu

HOW TO OBTAIN THE USE AND CARE GUIDE

• Download the Use and Care Guide from our website http://www.hotpoint.eu (you can use this QR code), specifying the product code.

Alternatively, contact our After-sales Service

CONTACTING OUR AFTER-SALES SERVICE

You can find our contact details in the warranty manual. When contacting our After-  sales Service, please state the codes provided on your product’s identification plate.

Frequently Asked Questions

What are the main components of the Hotpoint FA3 540 H IX HA oven?

The main components include the control panel, fan, lamp, shelf guides, door, upper heating element/grill, and bottom heating element. Additionally, there is an identification plate (do not remove) and accessories that may vary depending on the model.

How do I set the time on the Hotpoint FA3 540 H IX HA oven?

Press the appropriate buttons to set the hour and minutes on the display. Detailed instructions for setting the time are provided in the manual.

What functions are available on the control panel of Hotpoint FA3 540 H IX HA?

The control panel offers various functions, including conventional cooking, convection bake, grill, turbo grill, eco forced air, bread auto, pastry auto, and diamond clean. Each function has its specific purpose.

How do I start a cooking function manually on Hotpoint FA3 540 H IX HA?

To start a cooking function manually, turn the thermostat knob to set the desired temperature, and then you can set the cooking time, cooking end time (if needed), and a timer.

Can I use automatic functions like Bread Auto or Pastry Auto?

Yes, you can use automatic functions like Bread Auto or Pastry Auto by keeping the thermostat knob at the position for automatic functions (0/A).

What is the Diamond Clean function, and how do I use it?

The Diamond Clean function uses steam to clean the Hotpoint FA3 540 H IX HA oven. Pour 200 ml of drinking water into the bottom of the oven and activate the function when the oven is cold.

How do I clean the oven's interior and accessories?

After each use, clean the oven while it is still warm to remove food residues. You can also use the Diamond Clean function for optimum cleaning. Accessories can be soaked in a washing-up liquid solution and cleaned with a brush or sponge.

How can I remove and refit the oven door for cleaning?

The door can be easily removed and refitted for cleaning purposes. Detailed instructions on how to remove and refit the door are provided in the manual.

What should I do if the Hotpoint FA3 540 H IX HA oven is not working?

If the Hotpoint FA3 540 H IX HA oven is not working, first check for power cuts or disconnection from the mains. Ensure the oven is connected to the electricity supply. If the issue persists, you can contact the After-sales Service Center.

How can I read the cooking table for different foods?

The cooking table lists functions, accessories, and levels to use for various types of food. Cooking times start from when food is placed in the Hotpoint FA3 540 H IX HA oven, excluding preheating time. Follow the table's recommendations for best results.

Can I cook different foods at the same time in Hotpoint FA3 540 H IX HA oven?

Yes, the Convection Bake function allows you to cook different foods on different shelves simultaneously. Remove food with shorter cooking times as needed.

Any tips for using the Bread Auto function?

Follow the provided recipe and instructions for best results with the Bread Auto function. Ensure the dough is prepared correctly and follow the recommended steps.

Download The Pdf Link:Hotpoint FA3 540 H IX HA Class 3 Built-in Oven User Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>