PC Richard SW 10 Built In Dishwasher Instruction Manual
- June 1, 2024
- PC Richard
Table of Contents
PC Richard SW 10 Built-In Dishwasher
Product Information
Specifications
- Model: SW 10
- Measurement Range: 0 – 60 mm
- Material Number: 00622456
- Dimensions: 36mm x 66mm x 66mm
- Maximum Length: 1.1m
- Minimum Length: 280mm
- Material Number: 12022522
Product Usage Instructions
Assembly
- First, ensure all components are unpacked and undamaged. Follow the provided manual to assemble the product correctly.
Measurement
- Place the SW 10 on the surface you want to measure. Adjust the device to the desired range using the controls.
Reading Results
- Read the measurement displayed on the screen in either millimeters or meters, depending on the selected mode.
Maintenance
- Keep the product clean and dry when not in use. Avoid exposing it to extreme temperatures or humidity.
Frequently Asked Questions (FAQ)
Q: What is the maximum length this product can measure?
A: The SW 10 can measure a maximum length of 1.1 meters.
Q: How do I change the measurement units?
A: Use the controls provided on the device to switch between millimeters and meters.
Q: Is calibration required for this product?
A: The product comes pre-calibrated; however, periodic calibration checks are recommended for accurate results
Installation instructions
Available from customer service
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>