COSTWAY SP37609 Adjustable Basketball Hoop System Stand with Wheels User Manual
- June 2, 2024
- COSTWAY
Table of Contents
COSTWAY SP37609 Adjustable Basketball Hoop System Stand with Wheels
Please give us a chance to make it right and do better!
Contact our friendly customer service department for help first. Replacements
for missing or damaged parts will be shipped ASAP!
Before You Start
Please read all instructions carefully and keep them for future reference.
Warnings
- Attention: For home use only.
- Attention: The product is not suitable for children under 6 years
- Danger: Keep all small parts and packaging materials for this product away from babies and children, otherwise they may pose a choking hazard.
- Danger: Lack of attachment may cause a risk of tipping or falling hazard.
General Warnings
- The product must be installed and used under the supervision of an adult.
- Read through each step carefully and follow the proper order.
- Remove all packaging, separate and count all parts and hardware.
- Please ensure that all parts are correctly installed, incorrect installation can lead to danger.
- We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- Ensure a secure surface during installation, and place the product always on a flat, steady, and stable surface.
- Please check and maintain it regularly, and the most important part needs to be suspended, fixed, or anchored to the ground.
Packing list
Product SPECIFICATION
- MODEL: XY-BS218A
- Product dimension: 46.8”L x 28”W x 77.5”-101.5”H
- Backboard size:28″L x 18”W
- Hoop size:Ф15.3”
- Basketball stand base size: 28.7”L x 17.7”W x 5.5”H
- The capacity of base:30 Liters
- Adjustable Height:62.2”- 85.8”
- (From basketball hoop to ground)
Please read the instruction carefully and follow it to use.
WARNING
- The basketball stand is suitable for children over 6 years old.
- Children must use the basketball hoop under the supervision of an adult.
- IMPROPER INSTALLATION OR SWINGING ON THE
- RING MAY CAUSE SERIOUS INJURY OR DEATH.
- During play, do not wear jewelry (rings, watches, necklaces, etc)Objects may become entangled in the net.
- Check the product before each use for instability.
- Never put the stand on the base without water or sand, otherwise, it may cause serious injury or death.
Recommend to install this product by two adults
Installation Steps
- Check the accessories as per the packing list.
- Insert the axle through the base to hold the two wheels 11and the lower tube
- Please fix the tripod ⑥ L and ⑥ R on the left and right sides of the base respectively with screws M8x20, and then fix the other tripod ⑥ L and ⑥ R to the lower tube ⑤ with screw ⑨ M8x55
- Connect the mid-tube 4 to the lower tube 5 with a link screw (M8x50).
- Assemble hoop 2, backboard 1, and the upper tube 3 together with the backboard screw (M6x20).
- Insert the upper tube 3 into the mid-tube 4, align the screw holes of the two tubes according to the required size, tighten the adjustable screw 7, and then complete the installation.
- Tighten all bolts with spanners
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>