YoLink YS7804-UC Indoor Wireless Motion Detector Sensor User Guide
- June 3, 2024
- YOLINK
Table of Contents
YoLink YS7804-UC Indoor Wireless Motion Detector Sensor
INTRODUCTION
Motion Sensor is widely used in moving human body detection. Download YoLink
App, add Motion Sensor to your smart home system, which will able to monitor
your home’s security in real time.
LED lights can show the current status of device. See the explanation
below:
FEATURES
- Real-time Status – Monitor the real-time state of movement via YoLink App.
- Battery Status – Update battery level and send low battery alert.
- YoLink Control – Trigger an action of certain YoLink devices without internet.
- Automation – Set up rules for “If this then that” function.
Product Requirements
- A YoLink Hub.
- A smartphone or tablet running iOS 9 or higher; Android 4.4 or higher.
What’s In The Box
- Qty 1 – Motion Sensor
- Qty 2 – Screw
- Quick Start Guide
Set Up Motion Sensor
Follow the steps below to set up your Motion Sensor via YoLink App.
- Step 1: Set up YoLink App
- Get the YoLink App from the Apple App Store or Google Play.
- Step 2: Log in or sign up with YoLink account
- Open the App. Use your YoLink account to log in.
- If you don’t have a YoLink account, tap Sign up for an account and follow the steps to sign up an account.
- Step 3: Add device to YoLink App
- Tap the “ ” in YoLink App. Scan the QR Code on the device.
- You can customize the name, set the room, add to/remove from favourite.
- Name – Name Motion Sensor.
- Room – Choose a room for Motion Sensor.
- Favourite – Click “ ” icon to add/remove from Favourite.
- Tap the “Bind Device” to add the device to your YoLink account.
- Step 4: Connect to the cloud
- Press the SET button once and your device will connect to the cloud automatically.
- Press the SET button once and your device will connect to the cloud automatically.
Note
- Make sure you hub is connected to internet.
INSTALLATION
Recommended Installation
CEILING AND WALL INSTALLATION
- Please use the screws to stick the plate to wherever you want to monitor.
- Please connect the sensor to the plate.
Note
- Please add motion sensor to YoLink App before you install it.
USING YOLINK APP WITH MOTION SENSOR
Device Alert
- A movement is detected, an alert will send to your YoLink account.
Note
- Interval between two alerts will be 1 minute.
- Device will not alert twice if movement is under continuously detection in 30 minutes.
USING YOLINK APP WITH MOTION SENSOR
Details
You can customize the name, set the room, add to/remove from favorite, check device history.
- Name – Name Motion Sensor.
- Room – Choose a room for Motion Sensor.
- favorite – Click “ ” icon to add/remove from Favorite.
- History – Check the history log for the Motion Sensor.
- Delete – The device will be removing from your account.
- Tap the “Motion Sensor” in App to go to its controls.
- Tap the Three dots icon at the top-right corner to go to details.
- Tap the icon for each of the settings you want to personalize.
AUTOMATION
Automation allows you to set up “If This Then That” rules so the devices could act automatically.
- Tap “Smart” to switch to Smart screen and tap “Automation”.
- Tap “ + ” to create an automation.
- To set an Automation, you will need to set a trigger time, local weather condition, or choose a device with certain stage as a triggered condition. Then set one or more devices, scenes to be executed.
YOLINK CONTROL
YoLink Control is our unique “device to device” control technology. Under
YoLink Control, the devices could be controlled without internet or Hub.
Device which send out command is called controller (Master). Device which
receive command and act accordingly is called responder (Receiver).
You will need to set it up physically.
PAIRING
- Find a motion sensor as controller (Master). Hold the set button for 5-10 seconds, the light will flash green quickly.
- Find an action device as responder (Receiver). Hold the power/set button for 5-10 seconds, the device will enter the pairing mode.
- After pairing succeed, the light will stop flashing.
When the motion is detected, the responder will turn on as well.
UN-PAIRING
- Find the controller (Master) motion sensor. Hold the set button for 10-15 seconds, the light will flash red quickly.
- Find the responder (Receiver) action device. Hold the power/set button for 10-15 seconds, the device will enter the un-pairing mode.
- The above two devices will unpair by themselves and the light stops flashing.
- After unbundling, when the motion is detected, the responder will no longer turn on.
RESPONDER LIST
- YS6602-UC YoLink Plug
- YS6604-UC YoLink Plug Mini
- YS5705-UC In-wall Switch
- YS6704-UC In-wall Outlet
- YS6801-UC Smart Power Strip
- YS6802-UC Smart Switch
Continuously updating..
YOLINK CONTROL DIAGRAM
Maintaining the Motion Sensor
Firmware Update
Ensure our customer have the best user experience. Highly recommend you could update our newest version firmware.
- Tap the “Motion Sensor” in App to go to its controls.
- Tap the three dots icon at the top-right corner to go to details.
- Tap “Firmware”.
- The light will be slowly blinking green during the update and stop blinking when the update done.
Note
- Only the Motion Sensor that is currently reachable and has an available update will be shown on the Details screen.
FACTORY RESET
Factory reset will erase all your settings and bring it back to default. After the factory reset, your device will still in your Yolink account.
- Hold the set button for 20-25 seconds until the LED blinks red and green alternately.
- Factory reset will be done when the light stops flashing.
SPECIFICATIONS
TROUBLESHOOTING
If you are unable to get your motion sensor working Please contact Our Customer Service during business hours
US Live Tech Support: 1-844-292-1947 M-F 9am – 5pm PST
Email: support@YoSmart.com
YoSmart Inc. 17165 Von Karman Avenue, Suite 105, Irvine, CA 92614
WARRANTY
2 Year Limited Electrical Warranty
YoSmart warrants to the original residential user of this product that it will
be free from defects in materials and workmanship, under normal use, for 2
year from the date of purchase. User must provide a copy of original purchase
receipt. This warranty Does Not Cover abuse or misused products or products
used in commercial applications. This warranty does not apply to motion
sensors that have been improperly installed, modified, put to a use other than
designed, or subjected to acts of God (such as floods, lightning, earthquakes,
etc.). This warranty is limited to repairing or replacing of this motion
sensor only at YoSmart’s sole discretion. YoSmart will NOT be liable for the
cost of installing, removing, nor reinstalling this product, nor direct,
indirect, or consequential damages to persons or property resulting from the
use of this product. This warranty only covers the cost of replacement parts
or replacement units, it does not cover shipping & handling fees.
To implement this warranty please give us a call during business hours at
1-844-292-1947, or visit
www.yosmart.com.
REV1.0 Copyright 2019. YoSmart, Inc. All rights reserved.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is
applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
FAQs
Can I use the phone app to turn on or off this device? Does it function with an iPhone?****
The iPhone is compatible. You can switch off and on the sensor’s alert through the app, but it is not completely turned off. If you turn off the alert, it won’t give you an alert message or set off an alarm, but you can still see the app’s history of records.
When utilizing this to activate a third party switch, there is a delay. Is there an alternative?****
It should typically take less than a second for the switch to turn on when motion is sensed if you combine third-party switches with the Alexa routine. Due to network routing and the Alexa cloud, very rarely might there be a few of second delay. Please call or send an email to the technical support team if you frequently suffer delays.
If there is no one in the room, would a ceiling fan activate the motion sensor and cause it to signal that there is motion in the space?****
Many of them are in my home, garage, and barn. The one by the front door sends out a message when someone arrives and turns on the lights. The one in the barn only illuminates two light fixtures. I had to try with the various levels of sensitivity settings for these sensors to get it to function as I had hoped.
What occurs if the ability to enter a state of no motion is disabled? Will motion detection simply remain active the entire time?****
The least amount of time the motion must go without seeing motion before it can report no-motion is the time to enter no-motion condition. When motion is no longer detected if the motion sensor is disabled, it will immediately indicate no motion.
Does the app allow you to set up a “home mode” where only a subset of your sensors are on while the rest are?****
For various sensors, you can configure alternative alert systems.
You mentioned motion sensors; do you also have any light bulbs to go with them? Or can I connect any smart light to your motion sensor?****
That is a sensible query! You can use the Motion Sensor within the YoLink ecosystem (with other YoLink devices in your home or place of business) to control any light that is attached to one of our In-Wall Switches, or even a lamp plugged into one of our two smart plugs, our smart Power Strip.
Is the exterior motion sensor available yet?****
It has not yet been released. The new water-resistant casing is now being designed by ID and will go on sale in the first few months of 2019. The sensitivity choices and no motion event in automation have been introduced to this improved indoor motion sensor.
Will this motion detector function with my YoLink thermostat to reduce cooling or heating when I’m gone for x number of hours?****
Change the thermostat’s mode according to whether there is motion or not. Therefore, you can only change the temperature from cool to heat, auto, or off.
How long do YoLink YS7804-UC motion detectors stay activated?****
Long Duration Settings – In most circumstances, the time that your motion detector light is on once it is triggered should not exceed 20 to 30 seconds. But you may change the parameters to have it run for longer. For instance, a lot of lights have settings that range from a couple of seconds to an hour or more.
How do YoLink YS7804-UC wireless motion detectors work?****
Infrared sensors are used by wireless motion detectors, also known as motion sensors. These pick up on the infrared radiation released by living organisms to detect any movement inside their field of view.
Do YoLink YS7804-UC motion sensors work without wifi?****
Wireless motion sensors can connect to other components of your home security system via cellular or Wi-Fi networks. In most cases, wired sensors are operated by your home’s landlines or ethernet cables.
Do YoLink YS7804-UC motion sensors only work at night?****
Contrary to popular belief, motion sensor lights are operational during the day as well (as long as they are on). Why does this matter? Even in broad daylight, if your light is on, it will automatically turn on when it detects motion.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>