YOLINK YS7103-UC Siren Alarm User Guide

: June 9, 2024
: YOLINK

YOLINK YS7103-UC Siren Alarm

Product Information: Siren Alarm YS7103-UC

The Siren Alarm YS7103-UC is a smart home device that provides an audible alarm for your home security system. It connects to the internet via a YoLink hub and can be controlled through the YoLink app. The device has a power/sound level switch to adjust the alarm sound level and a micro USB port for the power supply. It also has a mounting slot to hang the siren on the wall and a battery compartment that houses two AA non-rechargeable batteries.

Package Contents

Siren Alarm
Quick Start Guide
AC/DC Power Supply Adapter
USB Cable (Micro B)

Required Items

2 x AA Batteries
Drill with Drill Bits (optional)
Nail or Screw & Anchor (optional)
Phillips Screwdriver (optional)
Hammer (optional)

LED Behaviors

Blinking Red Once, then Green Once: Device Start-Up
Blinking Red And Green Alternately: Restoring to Factory Defaults
Blinking Green: Connecting to Cloud
Slow Blinking Green: Updating
Fast Blinking Green: Control-D2D Pairing in Progress
Fast Blinking Red: Control-D2D Unpairing in Progress
Blinking Red: Warning
Fast Blinking Red Every 30 Seconds: Batteries are Low; Please Replace the Batteries

Alarm Tones

HI-LO Tone Once: Device Power-up
HI-LO for 5 Seconds: Sound Level Settings Adjusted
HI-LO (For Alarm Duration per Settings – Default is 30 Seconds): Warning

Contact Information

If you experience any problems with your installation or with the product, or if you have any questions that this manual does not answer, please contact YoLink customer support. See the Contact Us section for more info.

Product Usage Instructions

Before You Begin

Note that this is a quick start guide, intended to get you started on the installation of your Siren Alarm. Download the full Installation & User Guide by scanning the QR code provided in the manual. Ensure that you have all the required items before beginning the installation process.

Installation Process

Install two AA non-rechargeable batteries into the battery compartment of the Siren Alarm.
Ensure that the power/sound level switch is in the OFF position.
Remove the battery compartment cover by gently prying it open at the notch.
Hang the siren on the wall using a screw or nail through the mounting slot. Alternatively, use a drill with drill bits and a nail or screw & anchor to mount the siren on the wall.
Connect the Siren Alarm to a YoLink hub (SpeakerHub or the original YoLink Hub) using the YoLink app on your smartphone.
Adjust the alarm sound level using the power/sound level switch (H-High, M-Medium, L-Low).
Test the Siren Alarm by triggering the alarm through the YoLink app.

Note that a YoLink hub is required for remote access to the device from the app and for full functionality. Ensure that the YoLink app has been installed on your smartphone, and a YoLink hub is installed and online.

Welcome!

Thank you for purchasing YoLink products! We appreciate you trusting YoLink for your smart home & automa-tion needs. Your 100% satisfaction is our goal. If you experience any problems with your installation, with our products or if you have any questions that this manual does not answer, please contact us right away. See the Contact Us section for more info.
Thank you!
Eric Vanzo
Customer Experience Manager

The following icons are used in this guide to convey speciﬁc types of information:

Very important information (can save you time!)
Good to know info but may not apply to you

Before You Begin

Please note: this is a quick start guide, intended to get you started on the installation of your Siren Alarm. Download the full Installation & User Guide by scanning this QR code:

Installation & User Guide

You can also ﬁnd all guides and additional resources, such as videos and troubleshooting instructions, on the Siren Alarm Product Support page by scanning the QR code below or by visiting:
https://shop.yosmart.com/pages/siren-alarm-product-support

Product Support Support produit Soporte de producto

Your Siren Alarm connects to the internet via a YoLink hub (SpeakerHub or the original YoLink Hub), and it does not connect directly to your WiFi or local network. In order for remote access to the device from the app, and for full functionality, a hub is required. This guide assumes the YoLink app has been installed on your smartphone, and a YoLink hub is installed and online (or your location, apartment, condo, etcetera, is already served by a YoLink wireless network).

In the Box

YOLINK YS7103-UC Siren Alarm-FIG-3

Required Items

The following items will be required:

The following items may be required: YOLINK YS7103-UC Siren Alarm-
FIG-5

YOLINK YS7103-UC Siren Alarm-FIG-6

YOLINK YS7103-UC Siren Alarm-FIG-7

LED Behaviors

YOLINK YS7103-UC Siren Alarm-FIG-9 Blinking Red Once, then Green Once
Device Start-Up
Blinking Red And Green Alternately
Restoring to Factory Defaults
Blinking Green
Connecting to Cloud
Slow Blinking Green
Updating
Fast Blinking Green
Control-D2D Pairing in Progress
Fast Blinking Red
Control-D2D Unpairing in Progress

Alarm LED

Blinking Red
Warning
Fast Blinking Red Every 30 Seconds
Batteries are Low; Please Replace the Batteries

Alarm Tones

HI-LO Tone Once
Device Power-up
HI-LO for 5 Seconds
Sound Level Settings Adjusted
HI-LO (For Alarm Duration per Settings – Default is 30 Seconds)
Warning

Power Up

To power up the Siren Alarm for the ﬁrst time, ﬁrst install the batteries. Ensure the switch is in the OFF position. Remove the battery compartment cover by gently prying it open at the notch.
Observing the polarity markings on the Siren Alarm, install two new alkaline or lithium, non-rechargeable, batteries.
insert and snap the battery compartment cover back in place.
Upon power-up, the siren alarm will briefly activate. You can cover the opening on the front of the Siren Alarm if you wish to muffle this sound and/or you can ﬁrst slide the switch to the low (“L”) position, allow it to activate briely, then put the switch on the desired high or medium sound level setting.

You can press the SET button to activate the siren if it is off, or to deactivate it is on.

Install the App

If you are new to YoLink, please install the app on your phone or tablet, if you have not already. Otherwise, please proceed to the next section.
Scan the appropriate QR code below or ﬁnd the “YoLink app” on the appropriate app store.

Open the app and tap Sign up for an account. You will be required to provide a username and a password. Follow the instructions, to set up a new account. Allow notiﬁcations, when prompted.
You will immediately receive a welcome email from no- reply@yosmart.com with some helpful information. Please mark the yosmart.com domain as safe, to ensure you receive important messages in the future.
Log in to the app using your new username and password.
The app opens to the Favorite screen. This is where your favorite devices and scenes will be shown. You can organize your devices by room, in the Rooms screen, later.
Refer to the full user guide and online support for instructions on the use of the YoLink app.

Add Your Siren Alarm to H the App

Tap Add Device (if shown) or tap the scanner icon:
Approve access to your phone’s camera, if requested. A viewﬁnder will be shown on the app.
Hold the phone over the QR code so that the code appears in the viewﬁnder. If successful, the Add Device screen will be displayed.
Follow the instructions to add your Siren Alarm to the app.

Installation

Location Considerations:

The Siren Alarm is intended for indoor use. Consider one of our outdoor alarm controllers with siren, for outdoor applications. Place or install your Siren Alarm at an indoor location that is clean and dry, with temperature and humidity conditions within the limits of the product environmental speciﬁcations
(refer to the product listing or product support page on our website).
The Siren Alarm can be wall-mounted, using the mounting slot on the rear of the device, hanging it from a nail or screw. The Siren Alarm can be placed on any stable level surface, like a shelf or countertop. It is important to securely mount the Siren Alarm and/or protect it from being knocked down–physical damage to the device is not covered by the warranty.
Avoid locating the Siren Alarm near head height or at locations where people may be close nearby when it activates.
Place or install your Siren Alarm at a location with an available AC outlet (for the plug-in power adapter) or with an available USB power outlet. Please note: while the Siren
The alarm has batteries, they are only capable of powering it for limited power outages. Your Siren Alarm, on good batteries, should be capable of activating for no less than 5 minutes after being on battery power for 24 hours.
The Siren Alarm is not vandal- or tamper-resistant. If using the Siren Alarm where it may be subjected to tampering, consider mounting it elsewhere. Mounting the Siren Alarm higher on the wall may deter tampering.
When considering where in your home or business to place the Siren Alarm, consider ﬁrst the requirements and the application. For personal notiﬁcation, such as for a water leak detection application, locate the Siren Alarm closer to your expected locations in the home or building. For example, if you are concerned about sleeping through a phone push notiﬁcation or SMS/text message, consider placing the Siren Alarm in or near your bedroom. If you are using the Siren Alarm for security purposes, and want it to scare off an intruder, place it closer to areas where an intrusion is expected, keeping in mind that the intruder should not have easy access to the Siren Alarm (to silence or disable it). If it is required that the siren sound is heard outside of your home or business, consider one of our outdoor alarm controllers and sirens.
We recommend testing the Siren Alarm at the proposed location before installing it. If needed, additional Siren Alarms can be easily added to your system, and they can be conﬁgured to activate and deactivate in unison. This may be required for larger homes and businesses, and where ambient sound levels are higher and/or where sound does not carry well between areas.

Install the Siren Alarm:

If you are not wall-mounting the Siren Alarm, you can place it where desired, then proceed to the next section, Test Your Siren Alarm.
If hanging the Siren Alarm from a nail, hammer the nail into the wall at the desired location, leaving approximately 1/8” or 3 mm space on the end of the nail. Proceed to step 4.
If hanging the Siren Alarm from a screw, insert the screw in the wall, at the desired location. If using a wall anchor, install the anchor per the manufacturer’s instructions. Insert the screw with a screwdriver, leaving approximately 1/8” or 3 mm space on the end.
Hang the Siren Alarm on the nail or screw. Gently tug down on the Siren Alarm, to ensure it is secure.

Test Your Siren Alarm:

You should test the Siren Alarm for basic functionality (e.g. works when you activate it) and to ensure it can be heard remotely, as needed. You can use the SET button to turn the siren sound on and off. Use the Start Alarm button in the app to remotely test the Siren Alarm. If the Siren Alarm is not loud enough throughout all required areas of your home or building, you can change the setting to high, you can relocate it, or you can add additional Siren Alarms.
Proceed to the full Installation & User Guide or the online product support to complete the set up of your Siren Alarm.

Contact Us

We are here for you, if you ever need any assistance installing, setting up or using a YoLink app or product!
Need help? For fastest service, please email us 24/7 at service@yosmart.com
Or call us at 831-292-4831 (US phone support hours: Monday – Friday, 9AM to 5PM Paciﬁc)
You can also ﬁnd additional support and ways to contact us at: www.yosmart.com/support-and-service
Or scan the QR code:

Finally, if you have any feedback or suggestions for us, please email us at feedback@yosmart.com
Thank you for trusting YoLink!
Eric Vanzo
Customer Experience Manager

15375 Barranca Parkway
Ste. J-107 | Irvine, California 92618
© 2023 YOSMART, INC IRVINE, CALIFORNIA