RUIMA ELECTRONICS T-8 Bluetooth Speaker User Manual

RUIMA ELECTRONICS T-8 Bluetooth Speaker

Specifications

• Power: 16W
• Frequency Response for main speaker: 55Hz-20KHz
• Power Supply: DC 5V

Product Usage Instructions

Bluetooth Mode
To use the Bluetooth mode, follow these steps:

1. Press the MODE/LED button on the control panel to select Bluetooth mode.
2. Simultaneously open the Bluetooth settings on your phone, tablet, or any other Bluetooth-enabled audio device.
3. Select “ISB384B” from the available devices (no need to enter a matching code).
4. The unit and your device will then connect via Bluetooth.
5. Press the NEXT SONG and PREVIOUS SONG buttons on the control panel to select a song.
6. Press the PLAY/PAUSE button to control the playing status.

TWS (Wireless Bluetooth Connection)
To pair another TWS speaker, follow these steps:

1. Make sure both speakers are in Bluetooth mode.
2. Press the TWS button on one of the speakers for around 3 seconds.
3. The speakers will then enter pairing mode.
4. Select the second TWS speaker from the available devices on your phone or audio device.
5. The two speakers will be paired wirelessly.

Line Input
To use the Line input, follow these steps:

1. Connect an audio device, such as a phone or MP3 player, to the Line input port using an appropriate audio cable.
2. Set the speaker to Line input mode by pressing the MODE/LED button until the LED display shows “LINE”.
3. Control the audio playback on your connected device.

USB Input
To use the USB input, follow these steps:

1. Connect a USB flash drive or USB storage device to the USB input port.
2. Set the speaker to USB mode by pressing the MODE/LED button until the LED display shows “USB”.
3. Use the control panel buttons to navigate through the files on the USB device and select the desired audio file.

MIC Input
To use the MIC input, follow these steps:

1. Connect a microphone to the MIC input port.
2. Adjust the volume using the VOLUME -/+ buttons on the control panel.
3. Control the microphone audio using the control panel buttons.

FAQ

Q: How do I know if the speaker is charging?
A: The charging indicator will be RED while charging and will turn off when fully charged.

Control Panel Function

1. LED Display

2. Power OFF&ON / VOLUME -&+

3. DC interface (5V)

4. MODE/LED(Long press to turn on/off light; Lightly press to enter into selection for Bluetooth,LINE Input,USB)

5. Line input

6. Previous track

7. USB input

8. Play/Pause&TWS (Wirless Bluetooth Connection: under bluetooth mode, press TWS button for around 3 seconds to pairing another TWS speaker.)

9. Next track

10. Charging Indicator
    RED=Charging Light off = Fully charged

11. MIC input

Specifications

• Power: 16W
• Frequency Response
• for main speaker: 55Hz-20KHz
• Power Supply: DC 5V

POWER SOURCE

1. Please charge the unit at least 4 hours before first time using.
2. Twist the dial clockwise/anticlockwise to switch on/off the unit.

CHARGE THE BATTERY
When the battery is charging, the CHARGE STATUS lights shows on the LED display is red. After the battery has fully charged, the light turns off.

1. Connect the USB charge cable to the DC5V interface of the speaker firmly.
2. When the battery is fully charged, please disconnect the USB charge cable from the speaker.
3. The speaker works normally when charging.

POWER/VOLUME
Twist the dial clockwise/anticlockwise to increase/discrease the volume.

PREVIOUS/NEXT BUTTON
Under playing status, press PREVIOUS/NEXT button to get back to a previous or next song.

PAUSE/PLAY BUTTON
To stop playing the current track, please press PAUSE/PLAY button on the control panel. Press it once again to continue playing.

MODE/LED
Long press to turn on/off light.
Lightly press to enter into playing mode selection(Bluetooth,LINE Input,USB).

LINE IN JACK

1. Connect an audio cable to the LINE IN JACK of the speaker and to the audio output socket on the external audio devices such as MP3 player, discman,etc,then select LINE by pressing the MODE/LED button on the control panel .
2. Play from an external audio device.

MIC IN JACK
Plug in microphone directly for playing.

USB JACK
Insert USB card directly for playing.

Bluetooth
Press MODE/LED button on control panel to select Bluetooth mode. Simultaneously open the Bluetooth setting on your phone, tablet or any other bluetooth enabled audio device and select “ISB384B”(no need to match code),the unit and device will then connected via Bluetooth. Press the “NEXT SONG” and “PREVIOUS SONG” button on the control panel to select the song press ” PLAY/PAUSE” button to control the playing status.

FCC Cautionÿ

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>