PAPIFEED PF025 Smart Pet Feeder User Manual

PAPIFEED PF025 Smart Pet Feeder

Please Read It Carefully And Keep It Properly Before Using The Product

Daily Feeding

(dog) we i ght| Normal **Increase**

act i v i ty

|

(dog)

weight

| Normal     Increase

act iv ity

---|---|---|---
2kg| 39g| 45g| 8kg| lllg| 128g
4kg| 669| 76g| 10kg| 131g| 152g
6kg| 89g| 104g| 12kg| 150g| 174g
14kg| 178g| 206g| 235g| 20kg| 233g| 270g| 307g
---|---|---|---|---|---|---|---
16kg| 197g| 228g| 259g| 22kg| 250g| 290g| 329g
18kg| 197g| 228g| 259g| 24kg| 267g| 309g| 351g
26kg| 274g| 318g| 361g| 36kg| 350g| 405g| 461g
---|---|---|---|---|---|---|---
28kg| 290g| 336g| 381g| 38kg| 364g| 422g| 480g
30kg| 305g| 353g| 402g| 40kg| 379g| 439g| 496g
32kg| 320g| 371g| 422g| 42kg| 393g| 455g| 517g
34kg| 335g| 388g| 441g| 44kg| 407g| 471g| 535g
(cat) Month|

1-2

|

2- 4

|

4 – 6

|

6- 8

|

8- 12

---|---|---|---|---|---
Suggest|

20- 309

|

30-509

|

50- 709

| 70- 809| 80- 90 9
(cat) we i ght|

2 ~ 3kg

|

3 ~ 5kg

|

5 ~ 7kg

|

pregnancy

| Lactation period
---|---|---|---|---|---
Suggest| 25-359| 35-559| 55 – 859| 70- 1109| 120 – 1909

If the pet fail to eat up the previous programmed meal,please reduce the next meal portion.

Component Breakdown

Product Specifications

Cat,Dog,Rabbit,Squirrel,Small Pets

Rated Volt a ge|

SV 1A

Product Power|

SW

Power Supply| DC SV Adapter & 4•AA Alkaline Battery
Mater i al|

Echo-Friendly ABS

Product Size| 2os•14s•277mm a.2•s.s•10.9in
P r oduct We i ght|

1kg 2.21b

Product Capacity|

3.SL

Pet Food|

Dry Food

Portion Size|

~20g/Portion (differed due to the different pet food density)

Packing List

Product Hardware Assembly Steps

1. Installation of Food Tank.

2. There are two ways to connect the power supply, you can choose to use the power adapter to connect the power supply, or you can choose to use 4 AA batteries as the power supply. (It is recommended to have two power supplies at the same time. When there is a power failure at home, AA batteries can be used as a backup power supply to prevent the feeder from stopping working).

3. Pour the grain.
   Note:

4. Do Not use canned wet or moist pet food.

5. Recommend kibble size ranging from 5-10mm / 0.2-0.4in in diameter.

6. Install the Safety Lock.

Daily Feeding

[Low Battery Alert] (Only Use Battery)
When the battery level is too low, the number in the screen will keep flashing. (To remind us that we should replace the battery)

| In the rest screen, short press the screen to light up. ( On Battery Power Only )
---|---
Long press to continuously increase data.
Press and Hold for 2 Seconds to Manually Dispense a Portion of Food.
–| Long press to continuously reduce data.
| Press and hold for 3s under the main interface to enter the time setting on the main interface.
Short press to save the currently set data and return to the main interface.
| Short press on the main interface to set the number of meals, meal time, and the number of portion per meal.(When the number portion is set

to 0, it means that there will be no food for this number of meals).

In Settings, switch the parameters that need to be set.

Basic Interface Understanding

Time Setting

1. Under the main interface,long Press the key for 3s to set the time.
2. Press the key(+/-) to increase or decrease the hours and minutes value.Press [ ] to swift between hour and minute;
3. After complete the setting,press [ ] to save the data and return to the main interface.

Manual Feeding

Long press the [+) for 2s to feed for one portion.Press once to release one portion

Meal setting

1. Under the main interface short click the I I to enter into meal setting interface. There are [ )[-02-1[-03-1[-04-] meals.
2. Press thel again to enter the hours setting of the meal time, and long press the[+)or [—] to quickly set the data.
3. Press further set the minutes of meal time, and long press + or – to quickly set the data.
4. Press to set the portions,adjust the value with the key +/-;
5. Tip: If enough meals have been set, you can directly press the ( ) key to complete the current meal number setting. If you need to set more meals, please press the key to enter the next meal number setting.
6. After the setting is completed, press to confirm and save the settings, and prompt [—-] to return to the main interface (Time interface)

Product Disassembly & Cleaning

Note: In addition to the host part of the feeder’s other assembled parts can be disassembled and cleaned.

Q&A Trouble Shooting

Q:Why with the programmed meal,no food dispensing from the feeder?

A:Please check following:There are some pet food in the food hooper.If there is any error indicating on the screen.Make sure you have pour into some non sticky dry food into the feeder instead of wet and canned one

:lf the power cord is bitten off by a pet, will it electrocute the pet?

A:We use a 5V safety voltage,No electrocution to pets!

Q:Why the food hooper can not be washed?

A:Non-detachable mainly because of the simple internal structure of the product, there is no blind Angle.Press one key to release the food from the hooper and wipe out the dispensing outlet and the inner wall to kee the food fresh.

100% After Sales Service
We provide a I-year warranty for this appliance.
Please email our support team at [service@papifeed.cn) if you have any questions, attach your order number and describe your problem in your email. We will get back to you within 24 hours.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>