EZVIZ C6W Smart Wi-Fi Pan and Tilt Camera User Manual

EZVIZ C6W Smart Wi-Fi Pan and Tilt Camera

Product Information

The product is a camera manufactured by Hangzhou EZVIZ Software Co., Ltd. It comes with various components and features, including a lens, LED indicator, microphone, speaker, power port, Ethernetport, and a reset button. The camera supports Wi-Fi connectivityand has a slot for a Micro SD card for storage. The device appearance may vary depending on the model purchased.

Product Usage Instructions

1. Power-on: Connect the camera to power. The LED indicator will turn fast-flashing blue, indicating that the camera is powered on and ready for Wi-Fi configuration.
2. Create an EZVIZ user account:
   • Connect your mobile phone to Wi-Fi.
   • Search for “EZVIZ” in the App Store or Google Play. Download and install the EZVIZ app. Launch the app.
   • Follow the start-up wizard to create and register an EZVIZ user account.
3. Connect to the Internet:
   • Log in to your EZVIZ account using the app.
   • On the Home screen, tap the “+” button on the upper-right corner to go to the Scan QR Code interface.
   • Scan the QR code on the bottom of the camera or in the Quick Start Guide.
   • Follow the EZVIZ app wizard to finish Wi-Fi configuration.
4. Scan QR Code: Scan the QR Code on the device body or Quick Start Guide to add the camera.

Package Contents

The device appearance is subject to the actual one you have bought.

Basics

LED Indicator

• Solid Red: Starting up.
• Slow-flashing Red: Wi-Fi connection failed.
• Fast-flashing Red: Device exception (e.g. Micro SD card error).
• Slow-flashing Blue: Running properly.
• Fast-flashing Blue: Ready for the Wi-Fi connection.
• Solid Blue: Video is being viewed or played back in EZVIZ App.
• Slow-flashing Amber: Privacy mode is enabled.
• Fast-flashing Amber: Alarming.

Micro SD Card Slot
After installing the Micro SD card, you should initialize the card in the EZVIZ app before using it.

Reset Button
Hold for 5 seconds to restart and set all parameters to default.

Interfaces of different devices are disatributed in different locations, please refer to the material objects for details.

Power-on

The LED turning fast-flashing blue indicates that the camera is powered on and ready for Wi-Fi configuration.

Create an EZVIZ user account

Step 1
Connect your mobile phone to Wi-Fi.

Step 2
Search for “EZVIZ” in the App Store or Google Play . Download and install the EZVIZ app. Launch the app.

Step 3
Create and register an EZVIZ user account by following the start-up wizard.

Connect to the Internet

Model/Wi-Fi Signal

• CS-C6Wi: 2.4G Wi-Fi 5G Wi-Fi
• CS-C6W: 2.4G Wi-Fi

Wireless Connection: Connect the camera to Wi-Fi.

Step 1
Log in to your EZVIZ account.

Step 2
On the Home screen, tap “+” on the upper-right corner to go to the ScanQR Code interface.

Step 3
Scan the QR code on the bottom of the camera.

Step 4
Follow the EZVIZ app wizard to finish Wi-Fi configuration.

Hold the Reset button for 5s in any of the following cases:
The camera fails to connect to your
Wi-Fi network.
You want to select another Wi-Fi network.

Wired Connection: Connect the camera to a router.

Step 1
Connect the camera to the LAN port of your router with the Ethernet cable.

Step 2
Log in to your account using the EZVIZ app.

Step 3
On the Home screen, tap “+” on the upper-right corner to go to the Scan QR Code interface.

Step 4
Scan the QR code on the body of the camera.

Step 5
Follow the wizard to add the camera to the EZVIZ app.

Installation

Make sure the wall/ceiling is strong enough to withstand three times the weight of the camera. Here we take ceiling mounting as an example.

Step 1： Install the Micro SD Card (Optional)

Insert the micro SD card (sold separately) into the card slot as shown in the figure  below.

Step 2: Install the Base

Step 3: Install the camera

EZVIZ Connect

Use Amazon Alexa
These instructions will enable you to control your EZVIZ devices with Amazon Alexa. If you run into any difficulties during the process, please refer to Troubleshooting. Before you start, make sure that:

Before you start, make sure that:

1. EZVIZ devices are connected to the EZVIZ app.
2. In the EZVIZ app, turn off the “Image Encryption” in the Device Settings page.
3. You have an Alexa-enabled device (i.e Echo Spot, Echo-Show, All-new Echo-Show, Fire TV (all generations), Fire TV stick (second generation only), or Fire TV Edition smart TVs).
4. The Amazon Alexa app is already installed on your smart device, and you have created an account.

To Control EZVIZ devices with Amazon Alexa:

1. Open the Alexa app and select “Skills and Games” from the menu.
2. On the Skills and Games screen, search for “EZVIZ”, and you will find “EZVIZ” skills.
3. Select your EZVIZ device’s skill, then tap ENABLE TO USE.
4. Enter your EZVIZ username and password, and tap Sign in.
5. Tap the Authorize button to authorize Alexa to access your EZVIZ account, so that Alexa can control your EZVIZ devices.
6. You will see “EZVIZ has been successfully linked”, then tap DISCOVER DEVICES to allow Alexa to discover all your EZVIZ devices.
7. Go back to Alexa app menu and select “Devices”, and under devices you will see all your EZVIZ devices.

Voice Command

Discover a new smart device via the “Smart Home” menu in the Alexa app or the Alexa Voice Control function. Once the device is found, you can control it with your voice. Speak simple commands to Alexa.

Your device’s name for example: “show xxxx camera,” can be modified in the EZVIZ app. Every time you change the name of the device, you will need to discover the device again to update the name.

Troubleshooting

What do I do if Alexa fails to discover my device?

• Check if there are any Internet connecting problems.
• Try to reboot the smart device and re-discover the device on Alexa.

Why does the device’s status Show “Offline” on Alexa?
Your Wireless connection might have been lost. Reboot the smart device, and re-discover on Alexa. Internet access on your router could be unavailable. Check if your router is connected to the Internetand try again.

For details about countries that support the using of Amazon Alexa, see its official website.

Use Google Assistant

With the Google Assistant, you can activate your EZVIZ device and watch live by speaking Google Assistant voice commands.

The following devices and apps are required:

1. A functional EZVIZ app.
2. In the EZVIZ app, turn off the “Image Encryption” and turn on the “Audio” in the Device Settings page.
3. A TV with functional Chromecast connecting to it.
4. The Google Assistant app on your phone.

To get started, please follow below steps:

1. Set up the EZVIZ device and make sure it works properly on the app.
2. Download the Google Home app from the App Store or Google Play Store and log into your Google account.
3. On the Myhome screen, tap “+” on the upper-left corner, and select “Set up device” from the menu list to go to the Set up interface.
4. Tap “Works with Google”, and search for “EZVIZ”, where you will find “EZVIZ” skills.
5. Enter your EZVIZ username and password, and tap Sign in.
6. Tap the Authorize button to authorize Google to access your EZVIZ account, so that Google can control your EZVIZ devices.
7. Tap “Return to app”.
8. Follow the above steps to complete the authorization. When synchronization is completed, EZVIZservice will be listed under your list of services. To see a list of compatible devices under your EZVIZ account, tap on the EZVIZ service icon.
9. Now try some commands. Use the name of the camera that you created when you set up the system.

Users can manage devices as a single entity or in a group. Adding devices to a room allows users to
control a group of devices at the same time using one command.
See the link for more information:
https://support.google.com/googlehome/answer/7029485?co=GENIE.Platform%3DAndroid&hl=en

For detailed information, please visit www.ezviz.com/eu.

INFORMATION FOR PRIVATE HOUSEHOLDS

1. Separate collection of waste equipment: Electrical and electronic equipment that has become waste is referred to as waste equipment. Owners of waste equipment must dispose of it separately from unsorted municipal waste. In particular, waste equipment does not belong in household waste, but in special collection and return systems.
2. Batteries and rechargeable batteries as well as lamps: Owners of waste equipment shall, as a rule, separate waste batteries and rechargeable batteries that are not enclosed in the waste equipment, which can be removed from the waste equipment without being destroyed, from the waste equipment before handing them in at a collection point. This does not apply if waste equipment is prepared for reuse with the participation of a public waste management authority.
3. Options for returning waste equipment: Owners of waste equipment from private households can return it free of charge to the collection points of the public waste management authorities or to the take-back points set up by manufacturers or distributors within the meaning of the Electrical and Electronics Equipment Law. Stores with a sales area of at least 400 m² for electrical and electronic equipment and those grocery stores with a total sales area of at least 800 m² that offer electrical and electronic equipment several times a year or on a permanent basis and make it available in the market are required to take it back. This also applies in the case of distribution using means of distance communication, if the storage and shipping areas for electrical and electronic equipment are at least 400 m² or the total storage and shipping areas are at least 800 m². Distributors shall, in principle, ensure take-back by providing suitable return facilities at a reasonable distance from the respective end user. The possibility of returning waste equipment free of charge exists for distributors who are obliged to take it back, among other things, if a new similar device that essentially fulfills the same functions is delivered to an end user.
4. Privacy Notice: Waste equipment often contains sensitive personal data. This applies in particular to devices of information and telecommunications technology such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the waste equipment to be disposed of.
5. Meaning of the symbol “crossed-out wheelie bin”: The symbol of a crossed-out wheelie bin regularly depicted on electrical and electronic equipment indicates that the respective device is to be collected separately from unsorted municipal waste at the end of its service life.

References

• VIZ | The Best in Manga, Anime & Global Entertainment
• EZVIZ - Creating Easy Smart Homes
• EZVIZ - Creating Easy Smart Homes
• Contact EZVIZ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>