KRAMER OSP-MM1 Optical MM 850nm 10G SFP Plus Transceiver User Guide

KRAMER OSP-MM1 Optical MM 850nm 10G SFP Plus Transceiver User Guide

OSP-MM1, OSP-SM10 Quick Start Guide
This guide helps you install and use your OSP-MM1 / OSP-SM10 for the first time.
Go to www.kramerav.com/downloads/OSP-MM1 or www.kramerav.com/downloads/OSP- SM10 to download the latest user manual and check if firmware upgrades are available.

Scan for full manual

Step 1: Check what’s in the box

• OSP-MM1 Optical MM 850nm 10G SFP+ Transceiver or
  OSP-SM10 Optical SM 1310nm 10G SFP+ Transceiver

• 1 Quick start guide

Step 2: Get to know your OSP-MM1 / OSP-SM10

Step 3: Safety Instructions

Warning: Class 1 Laser Product:

• Invisible laser radiation present.
• Avoid long-term viewing of laser.
• Avoid the use of magnifying viewing aids or instruments (such as binoculars, telescopes, microscopes and magnifying lenses, but not spectacles or contact lenses).
• Avoid placing optical devices in the emitted beam that could cause the concentration of the laser radiation to be increased.

Step 4: Operation and Installation Warnings

• OSP-MM1 and OSP-SM10 are designed to be used with LC(PC) and LC(UPC) connectors. Using an LC(APC) connector causes poor performance and can damage the connector.
• Always inspect and clean the connectors before you make a connection.
• Always use the connector housing to plug or unplug a fiber.
• Never touch the end face of the fiber connectors.

Step 5: Install the OSP-MM1 / OSP-SM10

To install the OSP SFP+ transceiver:

• Make sure the bail is pushed up, in the closed position.
• Insert the OSP SFP+ transceiver into the relevant optical device SFP+ slot and push it in until it clicks.
• Remove the protective cap and store it in a safe place for future use.

To remove the OSP SFP+ transceiver :

1. Pull the bail down to release the transceiver unit.
2. Pull the transceiver unit out by the bail from the optical device SFP+ slot.
3. If needed, put the protective cap back on.

****For optimum range and performance use the recommended Kramer cables available atwww.kramerav.com/product/OSP-MM1 or www.kramerav.com/product/OSP- SM10 Using third-party cables may cause damage!

Step 6: Technical Specifications

www.kramerav.com

Read More About This Manual & Download PDF:

References

• Kramer | Audio-Visual Solutions and Experiences
• Kramer | Audio-Visual Solutions and Experiences
• Application Diagrams - Kramer Electronics
• Application Diagrams - Kramer Electronics
• kramerav.com/product/OSP-MM1
• kramerav.com/product/OSP-SM10

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>