Kramer RTBUS-4C Round Table Mount 4 Cable Pass User Manual
- June 2, 2024
- Kramer
Table of Contents
RTBUS-4C Quick Start Guide
This guide helps you install and use your RTBUS-4C for the first time.
Go to www.kramerav.com/downloads/RTBUS- 4C to download the latest user manual and check if firmware upgrades are available.
Scan for Manual
Step 1: Check what’s in the box
- 1 RTBUS-4C Round Table Mount Cable Pass-Through
- 4 Cable bushings
- 1 Locking screw for locking ring
- 1 Quick start guide
Step 2: Get to know your RTBUS-4C
Step 3: Mount RTBUS-4C
To mount RTBUS-4C:
- Cut a hole in the table 115mm in diameter.
- Remove the four inner plate screws and remove the inner plate from the enclosure.
- Run the cables under the table, through the locking ring, and up through the hole in the table.
- Insert the cables into the bushings on the slots of the inner plate.
- Place the inner plate into the enclosure and secure the four screws.
- Place the enclosure into the hole in the table and secure it with the locking ring.
- Secure the locking ring with the locking ring screw.
Technical Specifications
Specifications are subject to change without notice at
www.kramerav.com
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Kramer RTBUS-4C Round Table Mount 4 Cable Pass User Manual – Optimized
PDF
Kramer RTBUS-4C Round Table Mount 4 Cable Pass User Manual – Original
PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>