kramer ACC3-12-SP 1:2 CAT Cable Splitter User Guide
- May 15, 2024
- Kramer
Table of Contents
kramer ACC3-12-SP 1:2 CAT Cable Splitter
Features:
- CAT A+B RJ-45 Port: Connect to a compatible CAT transmitter to send combined signals over the A+B port.
- CAT A RJ-45 Port: Connect to a compatible CAT receiver.
- CAT B RJ-45 Port: Connect to a compatible CAT receiver.
Function
Make sure the Dual CAT extension is set to active via CATtransmitter embedded webpages.
Mount ACC3-12-SP
Install ACC3-12-SP using one of the following methods:
- Refer to the ACC3-12-SP Quick Start Guide for detailed mounting instructions.
Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your
ACC3-12-SP.
FAQ (Frequently Asked Questions)
- Q: How do I check for firmware upgrades for ACC3-12-SP?
- A: Visit www.kramerav.com/downloads/ACC3-12-SP to download the latest user manual and check for available firmware upgrades.
- Q: Can I connect multiple devices to the CAT A and CAT B ports simultaneously?
A: No, each CAT port should be connected to a single compatible device at a time to ensure proper functionality.
ACC3-12-SP Quick Start Guide
This guide helps you install and use your ACC3-12-SP for the first time.
Go to
www.kramerav.com/downloads/ACC3-12-SP
to download the latest user manual and check if firmware upgrades are
available.
Step 1: Check what’s in the box
- ACC3-12-SP 1:2 CAT Cable Splitter
- 1 Quick start guide
- 1 Bracket set
- 4 Rubber feet
Step 2: Get to know your ACC3-12-SP
| # | Feature | Function |
|---|---|---|
| 1 | CAT A+B RJ-45 Port | Connect to a compatible CAT transmitter (for example an |
SWT3-41-U-T ) to send combined signals over the A+B port.
Make sure the Dual CAT extension is set to active via CAT transmitter embedded webpages.
2| CAT A RJ-45 Port| Connect to a compatible CAT receiver (for example an
EXT3-UE-R , EXT3-U-R ).
3| CAT B RJ-45 Port| Connect to a compatible CAT receiver (for example an
EXT3-UE-R , EXT3-U-R ).
Step 3: Mount ACC3-12-SP
Install ACC3-12-SP using one of the following methods:
-
Attach the rubber feet and place the unit on a flat surface.
-
Fasten a bracket (included) on each side of the unit and attach it to a flat surface (see www.kramerav.com/downloads/ACC3-12-SP).
-
Attach the rubber feet and place the unit on a flat surface.
-
Fasten a bracket (included) on each side of the unit and attach it to a flat surface (see www.kramerav.com/downloads/ACC3-12-SP).
-
Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the device.
-
Avoid uneven mechanical loading.
-
Appropriate consideration of equipment nameplate ratings should be used for avoiding overloading of the circuits.
-
Reliable earthing of rack-mounted equipment should be maintained.
Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your ACC3-12-SP.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>