eclipse 25116801414 Solar Black Cordless Light Filtering Polyester Roller Shade Instruction Manual
- June 4, 2024
- ECLIPSE
Table of Contents
25116801414 Solar Black Cordless Light Filtering Polyester Roller Shade
Instruction Manual
Solar Black Cordless Light Filtering Polyester Roller Shade
Content
Step 1 – Checklist
You will need the following tools:
– Drill
– Pencil
– Step Ladder
– Tape Measure
– Small Level
– Light Weight Hammer
– Screwdriver
Step 2 – Mounting Brackets
The Roller Shade (A) can be mounted 2 ways Inside Mount or Outside Mount. You
will need to leave 1-2 inches of space from the ends of Ileac/tail to properly
mount the Brackets (B). Always use the Wall Anchors (G) if you are mounting
the brackets onto drywall. Using a 13/64 drill bit, drill a hole for the
bracket screw. With a lightweight hammer, Insert the anchors until flush with
the surface.
Using Bracket Screw (D) and Bracket Washer (E), secure Bracket (C) to the top
of Bracket (B).
Step 3 — Installing the Shade & Securing the Headrail
Place the headrail onto Inc GrabSets iC) by .nscrttrg the tacit side et the
headrail first and then pushing the front side upward until it snaps into
place. There should be an audible Oa when the headrail Is secured.
Step 4 — Operation of Your Shade
To lower the shade:
Pull the shade by the handle to lower the shade to your desired height.
Pull the handle again to hold the shade in place.
To raise the shade: Pull the shade
by the handle to release the shade. Lit to the desired height then pull the
handle again to hold the shade in place. 
Step 5 – Maintaining Your Shade
Spot clean only or dust your shade with a clean cloth or feather duster.