Renusol 520075-K Console+ Ground Fixing Instruction Manual
- June 3, 2024
- Renusol
Table of Contents
Renusol 520075-K Console+ Ground Fixing Instruction
Read these instructions before installation! Installation should only be carried out by skilled, qualified personnel!
Mounting system for installing solar modules on flat roofs with a pitch of up to 5° without penetrating the roof. The ConSole is weighed down with ballast (gravel, paving slabs etc.) in order to resist wind loads. The required weight of the ballast depends on the height of the building, its location and the condition of the installation surface in addition to the magnitude of the wind loads. Guideline values for the necessary ballast can be calculated using
Eurocode 1 (EN 1991).
The ConSole can be stored and used at ambient temperatures of between -30 °C and +50 °C. The roof area must be free of snow, ice and dirt during installation. Be sure to observe the relevant regulations, latest technology standards and current health and safety guidelines during installation and, in particular, while working on the roof.
Testing/certification
TÜV 8011005400 ConSole materials have been tested for fire behaviour in accordance with DIN EN ISO 11925-2:2011-02 and categorised as class “E” in accordance with DIN EN 13501- 1:2010-01.
Calculation of the pressure and suction coefficients
The pressure and suction coefficients are calculated on the basis of wind
tunnel tests and are available from Renusol GmbH on request.
Warranty
The Renusol warranty only applies if an original ConSole complete system is used and the warranty terms and conditions are met. For implied defects liability/warranty please refer to the Renusol General Terms and Conditions. The ConSole and Streamliner may become elastically deformed as a result of transportation and packaging; this will not impair the performance. The current version of these installation instructions is available at www.renusol.com
spare parts
TOOLS REQUIRED
DIMENSION
| __ | __ | __ | __ | |
|---|---|---|---|---|
| Article No. | R520075-K | R520075-K + R460001 | R520075-K + R420023 |
R520075-K + R460001 + R420023
Modul min. – max. w:| –| –| 920 mm – 995 mm| 996 mm – 1075 mm
Modul min. – max. x:| 895 mm – 1015 mm| 1016 mm – 1085 mm| –| –
Modul min. – max. y:| 690 mm – 1180 mm| 690 mm – 1180 mm| –| –
Modul min. – max. z:| 1550 mm – 2400 mm| 1550 mm – 2400 mm| 1550 mm
– 2400 mm| 1550 mm – 2400 mm
INSTALLATION
- Use the Renusol web configurator to plan your project with ease.
- The images and texts in these instructions relate to the latest technology at the time of printing, subject to modifications.
Renusol Europe GmbH Piccoloministr. 2 51063 Köln Germany Telefon: +49 221 788707-0 Telefax: +49 221 788707-99 E-Mail: info@renusol.com www.renusol.com