FOTILE EMS9028S Range Hood User Manual

FOTILE EMS9028S Range Hood User Manual

Dear User, thank you for purchasing the Fotile Range Hood. At Fotile, we manufacture exquisite appliances that are expertly crafted with the finest materials. Before using the Fotile Range Hood, please take some time to read through this Product Manual (manual). It will familiar-ize you with important safety, operation and maintenance instructions, as well as help maximize your culinary experience.

Before using the Fotile Range Hood, you must follow the instructions, as specified in this manual. Any damage resulting from the improper operation and/or maintenance of the appliance may result in the loss of warranty. The warranty will become invalid, and your warranty application, whether direct or indirect, will not be accepted by authorized service center of Fotile. If you require warranty or post-warranty after-sale service, please contact the local authorized service center of Fotile rearest you.

Your satisfaction with the Fotile brand is important to us. Our after-sales service centers provide assistance in resolving issues with Fotile appliances. Product model and serial number on the plaque are required if you need services.

Product features and specifications are subject to change, at any time, without notice and may be different from those in this material. Please visit our website at www.fotileglobal.com for the most up-to-date information.

Warning and Safety Instructions

CAUTION: Accessible parts may become hot when used with cooking appliances.

Special version:
Please properly use the appliance, strictly complying with the user manual. FOTILE compa-ny will not bear responsibility for property loss and personal injury due to improper use

Warning:
The appliance can be used by children aged from 8 years and above and persons with reduced physical.sensory or mental capabilities or lack of experience and konwledge if they have been given supervision or instruction concerning use of the appliance in safe way and understand the hazards involved(only for EU market). Children shall not play with appliance. Cleaning and user maintenance shall not be made by children without supervison. This appliance is not intended for use by persons (including children) with reduced physical,-sensory or mental capabilities, or lack of experience and konwledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

a. Pour out the gathering oil periodically according to the oil cup indication; please wipe the range hood surface once after every using the range hood; clean the air inlet outer cover and inner cover every three days; clean the impeller once every year (clean by professional people).
b. Please frequently clean the range hood surface, rectification plate and oil cup.
c. There is a fire risk if cleaning is not carried out in accordance with the instructions.
d. please do not flambe under the range hood.

Strictly execute

| The plug should be connected with reliable ground wire to ensure safety. The ground wire should not be connected with gas pipe, tap water pipe, lightening rod and telephone line. Bad ground connection may cause electric shock or other accidents.
---|---
| Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.
| If the new range hood is damaged obviously before using, please don’t install and contact FOTILE service center soon.
| Please comply with the safety guideline provided by the heating equipment manufacturer priorly and safety regula­tions published by the fire authority simultaneously.
| The wall should be strong enough to support the range hood. As for hollow wall or hollow plate, the thickness of its solid pad should be no less than 30mm. As for concrete wall, the installation can be directly operated. The range hood should be firmly fixed on the wall.
---|---
| When drilling on the roof or ceiling, please make sure not damage the electric wires and any other hidden devices
| The range hood is for family use only, and don’t use it in special environment (e.g. outdoor), and it also can’t be used to exhaust dangerous or explosive substance or gas.

Fotile assumes no responsibility if you use it in special environment.

| There shall be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas or other fuels.
| When the cooking pots catch fire, turn off the range hood immediately (It will stimulate the fire if the range hood is working). Effective fire extinguishing measures must be taken at once, such as covering the open flame with metal cover, turning off the general gas valve and keeping flammable substance away from the open flame, etc
| Make sure the exhausting pipe can math outdoors to avoid the fire and keep the fresh air in the room. Please don’t make the waste gas stay indoor, loft. garage, etc. (This is only for ducted range hood)
| The working temperature should not be more than 40 C.
| Please clean the range hood according to the user manual, otherwise, it may catch fire or cause other dangers.
| Please clean the oil cup timely to avoid overflowing when the oil reaches the ve very scale in the oil cup. Please don’t use the waste oil.
| Before install, clean or repair the range hood, please make sure cut off the power to avoid the electric shock. And wear protective golves to avoid your hands being hurt by range hood metal panel.
| The plug shall be accessible after the appliance has been installed. Cut off the power if you are not going to use range hood for a long time.
| If the supply cord is damaged, it must be replaced by the manu­facturer, its service agent or similarly persons in order to avoid a hazard.
| If there is abnormality, please turn off the range hood and cut off the main power supply, contact FOTI LE service center to repair it. It will easily cause dangers like electric shock, fire, if the range hood still working under abnormal conditions
---|---
| Please don’t let children use range hood by themselves and don’t place it where infants can touch, otherwise, it will cause burning injury, electric shock or other accidents.
| Please keep the product plastic package away from the infants, to avoid suffocation, etc. Children should be super­vised to ensure that they do not play with the appliance.

Forbidden

| Please clean the range hood according to the user manual, otherwise, it may catch fire or cause other dangers.
---|---
| Don’t transform, stretch, tie, ballast or extrude the power cord, or it may cause electric shock or fire.
| Don’t change the internal wring by yourself, otherwise, it will cause possible abnormality and personal injury; and the improper repair leads to electric shock, fire or other dangers.
| The air must not be discharged into a flue that is used for exhaust­fumes from appliances burning gas or other fuels.Regulations concerning on the discharge of air have to be fulfilled.
| Don’t let the stove working without pot otherwise it will damage the above range hood.
| Don’t touch the bulb that is still working or finish working for a short while, to avoid scalding.
| Don’t put your hands or other things into impeller when it is working to avoid hurting.
| All electrical parts including motor, switch and connections, etc. should be away from water. Don’t rinse range hood directly with water. Don’t use the range hood when it is wet to prevent electric shock.
| Never touch the power plug, power switch or other electric parts with wet hand, otherwise, it may cause electric shock.

a. Services guaranteed under warranty must be performed by Fotile certified service provider or personnel. The warranty is not effective for products removed for repair without authorization.
b. Adhere to the voltage and frequency settings listed in this manual to avoid possible damages to the range hood.
c.When the range hood and appliances supplied with enegy other than electricity are simultaneously in operation, the negative pressure in the room must not exceed 4 Pa (4 x 10-5 bar) (only for GERMANY).
d. Range hoods and other cooking fume extractors may adversely affect the safe opera-tion of appliances burning gas or other fuels (including those in other rooms) due to back flow of combustion gases. These gases can potentially result in carbon monoxide poisoning. After installation of a range hood or other cooking fume extractor, the opera-tion of flued gas appliances should be tested by a competent person to ensure that back flow of combustion gases does not occur.
e. Tempered glass is applied to the products of the company and the tempering treatment of the glass determines the extremely little possibility of spontaneous explosion. If the occurrence of spontaneous explosion is not due to improper use, our company promis- es free replacement of the accessories. The possibility of tempered glass breaking can be significantly increased in the following situations, which should be avoided: For instance, hitting the glass, especially the corners of the glass, with cooking utensils or other hard objects; The glass is impacted when you open a cabinet door around the Range Hood; Put the glass in an extremely hot or cold environment or an environment where heat and cold are excessively alternated.

Usage

Main Technical Specifications

Electrical parameter

Exhaust model (exhaust pipe)

a,For the Boost mode, air flow and noise in the table are the maximum value. b.Noise shown in table ES sound pressure level The corresponding sound power level is: 220V: 59dB (A) for lowspeed , 66dB (A) for high speed and 67cIB (A) for boost: 240V: 61dB (A) for low speed, 67dB (A) for high speed and 68dB (A) for boost. c.The air flow in the table are tested in accordance with IEC 61591-2010 standard The noise in the table are tested in accordance with 607044-2006 standard.

Operation Instruction

EMS9028S
Let’s be familiar with the range hood control interface.

1. Power Supply
2. Boost/High Speed
3. Sensor
4. Low Speed
5. Lighting

Power supply
Touch slightly to enter the standby state, and other keys can be operated at this moment; (If there is no other key operation within 2 minutes, it will be shut down automatically.) When the fan is in the operating state, touch slightly, flashes to enter the delay state, it will be shut down automatically after 2 minutes, and if is touched slightly again, it will be shut down directly; (In the process of delayed shutdown, if you touch other air volume keys slightly, the delay state is quit.) When the range hood is on, press and hold for 5 seconds to turn off all functions (includ-ing gesture induction), the range hood enters the off state: press again, and gesture induction will be restored automatically.

The following keys are only valid when the power is on.

Low speed
Touch slightly, the smoke shield will be on automatically and run in the low speed, then touch  slightly again, and the fan will stop operating;

Boost/High speed
Touch slightly, flashes, run the super instant suction function, touch 4’slightly again, switch to high speed, touch slightly again, and the fan stops operating; (if there is no operation after is slightly touched for the first time, it will be automatically switched to the high speed after 3 minutes, and is always on at this moment)

Lighting
Touch slightly, LED lamp is on, then touch slightly again, and LED lamp is off;

Gesture induction
Wave your hand to pass through the induction windows at both ends of the interface to turn on/off the range hood; (in the Off state, press or for 5 seconds at the same time to turn on/off gesture induction)

Cleaning and Maintenance

Warning: The range hood may be at risk of fire if it is not cleaned as specified in the Instruction.

• Before the range hood is cleaned or repaired, it should be made sure that the power cord is unplugged to avoid electric shock.
• While the range hood is being cleaned, water should be prevented from entering electri-cal components such as motors and control keys .
• When the fan is in operation, it is forbidden to put your hand within the operating area of the fan.
• Gasoline, acids, benzene, solvents or any other chemicals shall never be used to clean the range hood.

In order to use the range hood more comfortably, the surface of the range hood, wing plate, air intake hood and oil cup should be frequently cleaned. Cleaning the surface of the range hood, wing plate, air intake hood and oil cup frequently will facilitate the normal use of it.

Cleaning the surface of the range hood

Warning: In order to avoid scratching the surface of the range hood, never clean the machine with rough objects such as cleaning balls, brushes, scouring pad and coarse cloth.

1. The range hood shall only be cleaned with neutral soap or detergent. After cleaning, dry the surface with a soft cloth.
2. If the surface of the range hood appears to be smeared, a neutral detergent shall be used to clean the stain and the detergent shall not touch the control keys. Drip the deter-gent to the stain and leave it on the stain for a moment (the detergent should not stay on the range hood for too long, otherwise damage will be caused to the range hood). Wipe off the stain using a soft rag; remove the detergent with a slightly damp towel, and then dry the body with a soft dry towel.
3. Do not leave stains on the surface of the range hood for too long.
4. If you accidentally drip salt solution, disinfectant, bleach and other detergents on the stainless steel panel (most of these detergents contain harmful chemical ingredients), immediately wipe it with damp cloth and then dry it with dry cloth.

Cleaning the oil cup, wing plate and air intake hood

1. Hold both ends of the oil cup with both hands, keep the oil cup horizontal, move out slowly toward the front direction of the range hood, take down the oil cup and then drain off the accumulated oil (Figure 1);
2. First, grasp the front edge of the wing plate with both hands, turn it down to disengage the wing plate locking tab, and then turn it down at a certain angle, take down the wing plate (Figure 2), then hold the air intake hood with left hand, loose the two screws fixing the air intake hook with right hand by using cross-head screwdriver (Figure 3), take down the air intake hood (Figure 4), soak the oil cup, wing plate and air intake hood in warm water containing neutral detergent, and clean them with soft brush;
3. After cleaning, dry it, fix the air intake hood in the original position with screws, and then install the wing plate and oil cup.
   *Suggestion: After each operation of the range hood, please wipe the outer surface of the range hood (including the outer surface of the wing plate); clean the wing plate every three months;

Normal Malfunction and Trouble Shooting

Check whether there is electricity or not in the plug
Motor can working, but light can’t lighten| LED light is damaged| Replace LED light (done by professional people)
There is machinery shaking noise| Screw is loosed| check whether the surface screws are tightened or not
Suction power is weak| Too long distance between range hood and stove| Lower the range hood installation height (done by professional people)
Too much ventilation near the range hood leads to strong convection| Close some doors and windows
Noist| Exhaust pipe surface is distorted| Reinstall exhaust pipe (done by professional people)

a.lf the range hood still can’t work after getting rid of the above malfunctions,please contact FOTILE service center .
b.The ventilator shall be not allowed to be repaired by any party other than Fotile’s appointed technicians. Otherwise it may cause serious consequences and exempt the product from warranty.
c.The following circumstances do not fall into the scope of free warranty, and a fee will be charged for repair.

1. Damage resulting from improper handling, installation, use, maintenance and safekeeping conducted by customer.
2. Failure and damage caused by using the product beyond the normal operating conditions (damage caused in the case that the voltage is higher than 264V or lower than 206V).
3. The product installed, dismantled or repaired by customer or any party other than Fotile’s appointed service staff or agency.
4. Discrepancy between the information on the purchase voucher and the warranty card and the product.
5. Product damage caused by force majeure (such as natural disaster and war, etc.).
6. Product failure or damage arising from use not in conformity with the “instructions”.

Installation

Packing List

Installation Methods

 Wall Preparation
The wall should be strong enough to support the range hood. As for hollow wall or hollow plate, the minimum thickness of the lumber should be 30mm. As for concrete wall, the installation can be directly operated. The range hood should be firmly fixed on the wall.

Product Basic Conditions

Installation Suggestions

The range hood is only for family use only; Please do not use the range hood under other conditions.

The range hood should be installed above the stove. Keep parallel between the blower outer cover bottom end and cabinet bottom end.

The temperature of the range hood should not be more than 40°C .

The wall should be none-flammable. Never install the range hood on the flammable wooden wall.

Installation Diagram of the Range Hood

Opening size of the top cupboard or ceiling:

Note:

1. The installation height of the range hood is the recommended value (this height is the clearance value, i.e. the distance between the supporting surface of the cooking appliance on the stove and the lowest part of the range hood). The diagram of the collocation between the cupboard and the range hood is for reference only.
2. Please pay attention to the clearance between the exhaust fume collecting hood of the range hood and the cupboard on both sides before installation or disassembly.
3. If there is a relevant local law specifying the installation of range hood, it is suggested that you comply with such relevant laws. The suction effect might be influenced.

 The installation height of the range hood is the recommended value, and the cupboard and the range hood shown in the figure is for reference only. When the installation height of this prodyct(i.e. the distance between the supporting surface of the cooking appliance on the range and the lowest part of the range hood) is lower than 600mm, all parts below 600mm are non- flammable parts of the range hood or parts working under safe and ultra-low voltage, and the deformation of these parts will not affect the protection against the touch of live parts. (If relevant laws in the region stipulate the installation height of range hood, it is recommend- ed to abide by relevant laws, but the oil smoke suction effect of the product may be affected to some extent.

Preparation before installation

Warning, Please don’t make sundries into exhaust pipe to avoid damaging the range hood.
Estimate the exhaust pipe position. A straight and short exhaust pipe makes smoke extraction more smooth, please refer to installation diagram. The joint between exhaust pipe and wall hole should be sealed with tape, and ensure firm connection between ‘exhaust pipe and exhaust cover.Too small wall hole will affect smoke extraction, there- fore, please broaden the wall hole to fit exhaust pipe size under safety condition.

Tool preparation
Please prepare the following tools before range hood installation.

1. Impact electric drill (with drilibit of 10mm )
2. Cross screwdriver
3. Internal hexagonal wrench (M6)
4. Measuring tape
5. Hammer

Installation Steps

1. Open the packing box, take out the main body and count the packing lists;

2. Confirm the position for fixing the hook of main body:
   Confirm the installation position of the range hood, draw a center line, and then accu-rately determine the installation positions of the hook of main body and decorative cover hook on the wall with the bearing surface of the cooking appliance of the stove as the reference point, and make hole signs. (fig6)

3. Fix the hook
   Use the electric drill to drill 10mm holes (4 hooks of main body and 2 decorative cover hooks), embed expansion tubes ((p10x60mm), use the level ruler to ensure that the hooks are horizontal, and then use hook screws (ST4.5*60mm) to fix the hooks of main body and the decorative cover hooks. (fig8)
   Note: the wall on which the range hood is installed shall have sufficient support strength, and the thickness of the solid layer of the hollow walll and hollow plate must be 30mm or more.
   

4. Install outlet housing and outlet housing connecting rings:
   Move the whole machine out of the packing box, unscrew two screws used for fixing the fan cover on the back of the range hood, and remove the fan cover and the decorative cover .(fig9)

   • Place the outlet housing and the sealing rings at the air outlet of the main body, and use 8 screws (M4x18mm) to fix the outlet housing and the sealing rings. (fig10)
   • Remove the outlet housing connecting rings from the plastic packaging bag of the smoke tube, put one end of the large diameter on the outlet hous- ing, and fix and seal the outlet housing and the outlet housing connecting rings with butyl tapes. (fig11)
     

5. Arrange the exhaust duct: the aluminum foil exhaust duct and the reserved smoke tube or wall hole shall be sealed tightly to prevent smoke leakage, the smoke tube shall be free from extrusion, deformation and small-angle elbow, the number of elbows shall not exceed 2, and the smoke tube shall be straight- ened and fixed.(fig12)
   

6. Hook the machine:
   Lift the main body, hang the hook holes at the upper part of the back of the range hood at the hooks, use the level ruler to confirm that the range hood is horizontal, and use the screws (ST4x6mm) to fix the fan frame and the hooks; (fig13)

7. Connect the exhaust duct: cut off the redundant exhaust duct or connect the smoke tube according to the actual distance, put the smoke tube into the outlet housing connecting rings, then pre-fix the exhaust dust with two screws (ST3.9×9.5), and finally wrap it with foil tape for fixation and sealing; (fig14)

8. Insert the power cable plug of the range hood into the power socket, start the range hood, and check whether all joints of the exhaust duct are sealed well;

9. Tear the films: tear off the protective films of the fan cover and the decorative cover; Cautions: wear protec- tive gloves; (fig15)

10. Install the fan cover and the decorative cover Put the decorative cover into the outer cover and pick them up at the same time, firstly, hang the decorative cover on the decorative cover hooks, then push the decorative cover and the fan cover inwards along the decorative cover hooks at the same time, when the fan cover slides down slowly, clamp the upper locking tab of the fan cover into the fan frame, and insert the lower edge into the gap between the top plate and the fan frame. (fig16)

11. Install the wing plate and the oil cup Hold the front side of the wing plate with both hands, hang the left and right hooks on the rear side of the wing plate into the wing plate hanger, and then rotate the wing plate upwards to clamp the wing plate locking tab into the touch tab on the smoke collecting cover. (fig17)

Take out both sides of the oil cup with both hands and install the oil cup on the oil cup hooks of the smoke collecting cove.r(fig18)

12. The installation of the range hood is completed.

Notes:

1. First take down the fan cover prior to installation;
2. Exchange step (4) and step (5) in case of installation with the cupboard;
3. Select the drill bit according to the specific conditions of the drilling place.

Debugging

1. Put on oil cup;
2. Plug the power cable into socket;
3. Press light key, check whether light works normally;
4. Press motor key, check whether motor tums normally. In the following cases, cut off power, stop turning and check whether it is reason of installation (if range hood breaks down, please contact our service center
5. Machine shakes violently
6. Expansion pipe looses
7. Impeller doesn’t turn
8. Impeller with obvious grating when turning
9. Motor with abnormal noise
10. Press power key, motor stops turning
11. If the power supply wire is damaged, in consideration of the safety, must have the manufacturer, the repair department or similarly qualified personnel to replace;
12. When the range hood, gas stove or other fuel stove used at the same time, the room must be well ventilated.

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Component Name Diagram

Documents / Resources

| FOTILE EMS9028S Range Hood [pdf] User Manual
EMS9028S Range Hood, EMS9028S, Range Hood, Hood
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>