FOTILE SD2F-P6 3 In 1 Sink Dishwasher User Manual

FOTILE SD2F-P6 3 In 1 Sink Dishwasher

Safety Instructions

To avoid injury and property damage to users and others, we have categorized the safely instructions and assigned symbols as shown in the table below. Please review all the instructions carefully, and strictly observe each one of them. Failure to do so can result in personal injury or product damage. This appliance is not intended for use by people (including children with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge. Please keep children away from an unattended appliance. If the Power Cord becomes damaged, it must be replaced by the manufacturer. Please call FOTILE Customer Service to schedule a Service Visit.

Categories by Degree of Damage or Injury

• DANGER: Ignoring this symbol and operating incorrectly can cause danger, serious injuries or fire.
• WARNING: Ignoring this symbol and operating incorrectly can cause danger, serious injuries or fire.
• CAUTION : Ignoring this symbol and operating incorrectly can cause injuries or property damage.

Icons for Caution and Prohibition

CAUTION : The tempered glass on FOTILE product has a minimal probability of spontaneous glass breakage due to its reinforcing mechanism. If there are any conflicts between terms in this operation manual and national laws and regulations, the national laws and regulations shall govern.
Special notes: Please use this product by strictly following the instructions in this operation manual. The company is not responsible for any property damage or bodily injuries caused by improper usage of this product.

DANGER

• No Do not get the power cord, or any electric parts wet as this may cause electric shock or other accidental damages.
• Do not leave children unattended No when using this product as this could cause electric shock or other accidental damages.
• Before installation and repair, please disconnect the power cord to avoid Electric Stock electric shock
• Do not modify, stretch, knot or place No heaw objects on the power cord. Doing so may cause damage to the power cord and result in electric shock, fire, and personal / property damage.
• Do not touch the power plug, connector or electrical parts with Was Hands wet hands, this may cause electric shock.
• Do not use flammable solvents such No as alcohol to clean the sink..
• When moving the unit, please pay attention to the edges and corners of the sink to avoid scratches or injury. During operation of this product, do not forcibly open the door, as you can be scalded by hot water and cause personal injury.
• The electrical socket used with this appliance, must have reliable grounding to ensure Grounding safety. The grounding wire shall not be connected to a gas pipe, water pipe, lightning rod, or telephone line. Poor grounding may cause electric shock, personal injury, or property damage.

WARNING

• Do not use power sockets with loose or poor contact, this may cause electric shock, short circuit and or fire. Ensure secure connection of the power cord, or it may cause electric shock.
• Do not forcibly close the functional sink door when it is automatically opened; otherwise the door may be damaged.
• To avoid personal injury, property Mandatory damage or product damage, this product is not intended for use by children, people with reduced mobility, or reduced sensory judgement unless supervised by a responsible individual.
• Do not fill hot water into the inlet pipe directly, or it may affect the normal use of the product.

WARNING

• Do not touch heating units when Rex or Scald, in use, as it may cause scalds.
• Disassembly of the product for Do not repair or changing parts should Disassemble only be performed by a certified FOTILE Service Technician.
• If the ultrasound operation causes any discomfort, please stop using it and contact the manufacturer.
• When you open the door after operation, hot steam may escape. Please stand away from the door to avoid scalds.
• If water leaks during operation, please stop using and contact FOTILE after-sales service center immediately at 1-888-315-0366. ©
• In the process of washing dishes and produce in the functional sink (dishwasher cavity), use light liquid dish soap for tableware only, and do not use any foaming detergents.
• Knives and other utensils with sharp Mariory points must be loaded in the basket with their points down or placed in a horizontal position.
• Keep the plastic film and packing cases away from children to avoid suffocation accidents.
• Please stand away from the door to avoid scalds. Please use new hoses to connect appliances to the water source. Do not reuse old hoses. 1 Mandator Keep the plastic film and packing cases away from children to avoid suffocation accidents.
• For any operational errors, please Mandatory stop using the product, unplug the Action power cord from the electrical outlet, and take the appropriate actions according to the “Troubleshooting’ section in the User Manual. If the problem still persists, please call FOTILE Customer Service at 1-888-315-0366.

Caution

• Do not put objects with a lot of silt into the dishwasher, or it may disturb the normal operation of the product.
• Do not clean the glass with coarse cleaning agents, a metal pot scourer, a scouring pad with a rough surface, or sharp metal scrapers. These materials may scratch the glass surface and cause damage.
• The product may get hot during use. Please do not touch the heating elements of the product and their surrounding areas.
• Do not put heavy objects on the No glass door of the product.
• Do not clean meat in the functional skin
• Do not put jewelry, gold and other valuables into the sink for cleaning to avoid causing damage to the product and cleaned articles.
• The countertop the sink dishwasher Mansion will be installed into must have sufficient strength and height to support the product, and the dishwasher must be firmly installed in the countertop
• In case the power cord is damaged, it must be replaced by a professional from the manufacturer’s service department or similar department to avoid danger.
• Do not press the Start/Pause key frequently.
• Do not use multi-functional sockets with many plugs.
• Do not forcibly open the cover of the Secondary Sink door during power outage.
• During the operation of the product, do not pour water directly into the Secondary Sink, or it may cause abnormal operation of the product.
• Do not use elongated materials such as chopsticks to poke the door lock hole, or the machine will not function properly.
• When washing fruits and vegetables, do not put the fruits and vegetables with conflicting nutrients together, so as to avoid the loss of nutrients fruits and vegetables.
• Keep the complete machine away from heat sources and flammable materials such as gas and alcohol.
• After each cleaning, please clean out food debris in the debris basket before using it again in time.
• Please ensure the sewer pipe is not Mandatory blocked. Blockage may cause abnormal operation of the product.
• The installation must be carried out by an Australian certified plumber or Mandatory a technician appointed by Fotile.

Recommendations

• Try not to leave large pieces of residue (such as bones) in the tableware to be cleaned, so as not to interfere with the rotation of the spray arm and affect the normal use of the machine and the cleaning effect.
• After installing the spray arm, please check if it is properly installed to prevent the spray arm from falling off and damaging the machine.
• When closing the door, it is necessary to press the door to ensure that the functional groove body is sealed.
• Before washing tableware, it is recommended to add special dishwashing powder.
• If there are stains that are difficult to clean by hand or even steel wool on the tableware, they cannot be cleaned if the tableware is put into the dishwasher directly. It is recommended to pretreat the stains on the tableware and then put the tableware into the dishwasher for cleaning.
• If a small amount of water is found in the groove after opening the package, it is caused by the factory qualification test, instead of the fault of the machine itself.
• This product is not provided with faucet which needs to be equipped by the user.
• When placing tableware, avoid fragile objects such as goblets to touch other tableware.
• It is recommended to open the door after washing to keep the groove dry.
• Before running the fruit and vegetable program, please clean the residue at the bottom of the groove.
• You can also check whether the cleaned tableware is suitable against the following table:

Notes :

1. Please ensure that the tableware to be cleaned can withstand the temperature difference within the specified temperature range of the washing program.
2. For other special materials, please consult the after-sale: service center.

Note : The diagram shows SD2F-P6 (right) and SD2F-P6L. (left) positions of functional groove and sink are interchangeable.

Main Technical Specifications

control panel

1. Open button : Press [Open] button to directly open the door in clean storage status and non-operating status. In operating status, press (Start/Pause button, and then press [Open] button to open the door.
2. Dishes button : Press [Dishes] button to start the dishwashing program.
3. Produce button : Press (Produce button to start the Produce washing program.
4. Storage button : Press [Storage button in the dishwashing mode to enter the dishwasher’s clean storage mode after the dishwashing program ends.
5. Display screen: Display washing time, mode, load, function mode, product operation and
6. Mode button : Select one from the quick 15 min, quick 45 min and Intensive programs in dishwashing and Produce washing programs. You can also select ECO mode in dishwashing program.
7. Load button : Select from the three Produce washing programs: Small, medium, and Large.
8. Start/Pause button Control the start and pause of the product.
9. On/Off button : Control the on and off of power supply.

Operation Instructions
Dishwashing program
Press and hold the IOn/Off button ( to enable the number flashing – press Open button O – select the dishwashing mode 50-+ select the Mode (optional), – press I Start/Pause button to start washing – wash and dry tableware – finish washing – power off – daily cleaning.

Note : After washing, the door automatically opens and the system enters the tableware drying state. After 30 minutes, the door will close automatically. If it is less than 30 minutes, press and hold the power button to shut it off. Then the tableware drying system will stop working.

Select Mode (as shown in the table below):

Notes :

1. To have a better cleaning effect, add your Dish-washing powder before the placement of your tableware. If you are using dishwashing powder, place it at the bottom of the tank. If you are using a dishwasher pod, place it in the debris basket.
2. It’s suggested that you pre-rinse your tableware to avoid any food debris that may interfere witt the rotating spray arm which could affect the normal operation of the dishwasher.
3. The ECO program is suitable for a normally soiled load of dishes at rated capacity. And this Is a standard test program. Compared with other cleaning programs can save more water and electricity, and can achieve a better cleaning effect, recommended for daily use.

Produce washing program
Press and hold the IOn/Off button (‘ to enable the number flashing – press lOpen ) button & -> select the Produce washing mode -+ select the Mode (optional) &, -+ select Load al – press [Start/Pausel button to start washing – finish washing – power off   daily cleaning.

Note :

1. Select Mode: Press the Mode button to select one from the Quick 15 min, Quick 45 min and Intensive.
2. Select Load: Press Load button to select one from the three loads: Small, medium and Large

Notes :

1. The testing program of the machine is for super washing and high load, and the above data were measured in FOTILE Laboratory.
2. The white bloom on the surface of fruits will not affect consumption. Fruits with fruit wax on the surface are recommended to be washed by hand before consumption. The cleaning effect is better after cutting or breaking off the roots of leaf vegetables. For fruits and vegetables with high sediment content, it is recommended to clean them after pre-treatment: after cleaning, open the door cover in time for ventilation.

Storage function
Press and hold the IOn/Off button to enable number flashing. In the dishwashing mode press IStoragel button @J. Then, the clean storage icon is turned on. Press Start/Pausel button to start washing. During dishwashing, if you need to set the clean storage function, press [Start/Pausel button first before performing any operation.

Notes :

1. The clean storage function will only run after the dishwashing ends, and the duration of this function is 96 hours. During this period, pressing the power button will turn off the clean storage function.
2. The clean storage function is not available in the super quick washing mode.

Drain valve On/Off
In standby (black screen) mode, press and hold the power button to turn on the machine and turn it off within 5 seconds to open the drain valve. After 30 seconds, the drain valve will automatically close

Notes :

1. If there is a large amount of water in the groove, please drain the water multiple times.
2. There will be a slight motor noise during drainage, which is normal.

placement of tableware

1. The plate area can accommodate various types of plates. If there are plates of different depths, please place the deep plates in front of the shallow plates. The steamed fish plates can be placed on the rightmost side of the plate area
2. Large bowl and soup bowl area: accommodate soup bowls, large noodle bowls, etc.:
3. Chopstick cage: accommodate chopsticks or spoons:
4. Small bowl area: accommodate various types of rice bowls or smaller noodle bowls:
5. Cup area: accommodate glass cups, seasoning dishes, etc.:
6. Upper bowl rack: the upper dish rack is pulled out to accommodate mug, relish dish, small rice bowl, and hang various spoons;
7. Plate rack and movable turnover rack: The bracket of plate rack can be folded inward, and larger bowls such as noodle bowls can be placed after the movable turnover rack is put down;
8. After placing the tableware, avoid stacking the tableware together, so as not to affect the cleaning effect; In the event of a little tableware, spacing tableware helps better cleaning:
9. After placing the tableware, please ensure that the handle of the spoon type tableware does not protrude from the bottom of the dish rack to avold preventing the normal rotation of the spray arm. When closing the door, please ensure that the tableware or chopsticks (the length of the chopsticks shall not exceed 24cm) on the upper dish rack will not stand against the door, so as to avoid the deformation of the door or failing to clean dishes

Notes :

1. Place one chopstick in each small compartment of the chopstick cage, and three chop- sticks in the large compartment, with chopsticks placed in a staggered manner;
2. Relish dishes shall be clamped at the corresponding dish rack bracket for fixation;
3. The movable support can be adjusted so that the test tableware can be placed as shown.

installation and drainage pipe

Installation instructions for drainage pipes in the test program:

1. Install the drainer, adjust and install it in place to facilitate the installation of other hoses:
2. Install the large groove overflow corrugated pipe 1, and insert the soft rubber connector into the large groove overflow gap;
3. Connect the hard connectors of the exhaust corrugated pipe, large groove overflow corrugated pipe 2, and large groove overflow corrugated pipe 1 to the tee, and insert the soft rubber connector of overflow corrugated pipe 2 into the functional groove overflow interface:
4. Insert the forced drainage corrugated pipe to the connection interface of the forced drainage corrugated pipe of the tee, and place the middle section naturally. Insert the drainage corrugated pipe into the connection interface of the drainage corrugated pipe

Daily cleaning

1. Open the door and clean the residual dirt on the door.
2. Clean groove walls, wall comers and add detergent appropriately.
3. Rotate the slag basket counterclockwise to remove the slag, dump the slag and clean the basket
4. Rotate counterclockwise to remove and clean the spray arm.
5. Take off the filter plate and clean the plate.
6. Clean the bottom of the groove.
7. Install all parts and components in their original positions after cleaning, and check the correct ness of their installation.

Dismantle & wash spray arm: Hold the two gray locking tab bumps under the spray arm, press and rotate the bumps counterclockwise to remove the spray arm for cleaning. Installation of spray arm: Hold the two gray locking tab bumps under the spray arm. press and turn clockwise until the buckle clicks. and then move the spray produce no abnormal sounds.

Suggestions on Cleaning and Maintenance

1. Do not use detergent when cleaning the door seal. The door seal may be perforated or cracked over time. In this case, please replace with a new one in a timely manner.

2. Cleaning of panel and door glass: Clean manually with hot water and a small amount of detergent. Wipe with sponge cloth and dry with soft cloth after cleaning. Do not rub with scouring pad or metal wire articles to avoid scratching the surface.

3. Cleaning of stainless steel groove:
   Daily maintenance techniques for 304 stainless steel groove
   The sink dishwasher adopts a 304 stainless steel groove, which shall be protected to avoid scratches!

   • If you are a user for new decoration, you can apply a layer of oil on the exterior of the groove to avoid floating rust caused by metal debris in the decoration process. In addition, if the sink dishwasher is not used for a long time, a layer of oil can also be applied to protect the sink.
   • Use neutral detergent to regularly clean the sink, and clean completely with clean water. Clean gently, avoid using steel brush or rough brush, and dry with sponge or cloth after cleaning.
   • Do not place lemons, sauces, pickles, mustard or other salty or corrosive food in the sink or on the panel for a long time to prevent corrosion.
   • Try to avoid long-term contact between the groove and powerful bleaching powder, household chemicals and soap.
   • Try to avoid sharp and hard utensils such as knives, forks, and cookers from hitting the groove to prevent scratches, scratches, or dents on groove surface.
   • Do not put low-carbon steel or cast-iron cookware in the groove for a long time, and do not leave steel wool, rubber dishwashing sheets, wet dishwashing sponges, or other cleaning pads in the groove to avoid “floating rust” and “mildew spots” in the long run.
   • If any “floating rust” or ” mildew spots” are found on the groove, apply five-cleaning powder or toothpaste to the rust and spots, and then clean them with a rag. But do not clean the groove with scouring wire, polishing sheets, or polishing materials.

4. The spray arm and slag basket can be removed by rotating counterclockwise and can be cleaned with clean water.

5. After cleaning, there should be no water on the control panel, which will affect normal use.

6. After each cleaning, the food residue in the slag basket shall be cleaned in time, otherwise it will affect the next cleaning effect and generate abnormal flavor.

7. If fouling is found in the functional groove (such as whitening on the surface of the groove, heating plate, dish rack, etc.). please use a washing tablet or a small amount of sodium citrate to clean the groove.

Identification and treatment of common faults If you find anything unusual during use, please stop using it, unplug the power plug, and check the following items:

After the above troubleshooting, if the dishwater still cannot work normally, please contact FOTILE service hotline at 952315.

Exploded view

1. Door
2. Spray arm
3. 3. Filtering Screen
4. Vane locknut
5. Impeller (upper and lower)
6. Motor Cover
7. Diversion Base
8. Functional Sink
9. 9. Temperature sensor
10. Sealing Gasket for Heating Plate
11. Heating Plate
12. Electronic Lock
13. Motor
14. Seal ring of traction value
15. Valve pump assembly
16. Electrical Box
17. Bottom Cover
18. Door Motor
19. Inlet Valve
20. Overflow Port for the Functional Sink
21. Drain
22. Sink
23. Installation hole of soap dispenser
24. Faucet mounting hole
25. Fan
26. Fan fixing seat
27. assembly of PTC
28. Assembly of air intake seat
29. Overflow Port for the Sink

1. Door
2. Spray arm
3. Filtering Screen
4. Vane locknut
5. Impeller(upper and lower)
6. Motor Cover
7. Diversion Base
8. Functional Sink
9. Temperature sensor
10. Sealing Gasket for Heating Plate
11. Heating Plate
12. Electronic Lock
13. Motor
14. Seal ring of traction value
15. Valve pump assembly
16. Electrical Box
17. Bottom Cover
18. Door Motor
19. Inlet Valve
20. Overflow Port for the Functional Sink
21. Drain
22. Sink
23. Installation hole of soap dispenser
24. Faucet mounting hole
25. Fan
26. Fan fixing seat
27. assembly of PTC
28. Assembly of air intake seat
29. Overflow Port for the Sink

Abnormal condition and fault codes

In order to ensure safety and correct use, this product must be installed and repaired by professionals appointed by the Company. If this product cannot be used in a good condition because the consumer entrusts personnel who are not appointed by the Company to carry out installation and repair or the consumer carries out installation and repair, even during the warranty period, it is not within the scope of free maintenance, and the Company will not bear any responsibility for the property loss and personal injury caused thereby.

Customer Service
The following circumstances do not fall into the scope of warranty:

• Improper transportation, installation or maintenance conducted by user voluntarily.
• Product failure caused by abuse, misuse, modification, or use for other purposes or commercial purposes.
• Damage caused by cleaning and maintenance not in accordance with the instructions.
• Product damage caused by accident, fire, flood, force majeure, etc.
• Failure and damage caused by using the product beyond the normal operating conditions, e.g. the voltage is too high.
• Discrepancy between the information on the purchase voucher and the warranty registration information of the product.
• Fill out the paper product registration card attached in the product package and mail it to FOTILE.
• Log into the FOTILE Website for product registration: https://www.fotileglobal.com/us/Pro- ductRegistration.html
• If you have purchased the FOTILE sink dishwasher product, please inform us of the product model and serial number when communicating, which can help us serve you better. You can find the information at position A in the diagram:

This warranty covers original purchasers and any subsequent owners purchased the product in Australia. it the product is located in a place where authorized service of FOTILE cannot reach, you shall be responsible for paying the corresponding transportation expenses. or vou shall need to lake the product to the authorized service office for maintenance.

• If you have purchased FOTILE sink dishwasher product, please register as soon as possible, so we can communicate with you and provide our services when you need them. You can register your product using two methods:
• If you need other services, please feel free to contact FOTILE by the following ways: Customer Service Phone: (03) 9939 9926 Customer service email: service@ifotile.com.au (Please leave a phone number for daytime contact)
• Mailing address: Aurora Trading Group Ply Lid Aftersales Department 620 Camberwell Road, Camberwell VIC 3124

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>