SYMMONS Dia Accessory Suite Instruction Manual
- June 3, 2024
- SYMMONS
Table of Contents
SYMMONS Dia Accessory Suite
Model Numbers
- 353DTB-18 18″ Double Towel Bar
- 353DTB-24 24″ Double Towel Bar
- 363TB-18 18″ Towel Bar
- 363TB-24 24″ Towel Bar
- 353TS-22 22″ Towel Shelf
- 363TR Towel Ring
- 353RH Robe Hook
- 353DRH Double Robe Hook
- 353TH Toothbrush Holder
- 353TP Toilet Paper Holder
- 353TPC Toilet Paper Holder
- 353SD Soap Dish
- 353-SD2 Soap Basket
Modifications
- -STN Satin Nickel finish
Note: Append appropriate -suffix to model number.
Specification
All premium accessories are constructed from metal materials and plated in a standard polished chrome finish.
Warranty
- Limited Lifetime – to the original end purchaser in consumer/residential installations.
- 10-Years – for commercial/industrial installations. Refer to www.symmons.com/warranty for complete warranty information.
Dimensions
Note: Dimensions are subject to change without notice.
Replacement Parts
Replacement Parts
Description| Part Number
Mounting Hardware Kit Less Bracket| RA-017
Mounting Hardware Kit With Bracket| RA-026
Installation
-
Measure and mark centerlines for mounting bracket installation using dimensions.
Note:
365DTB-18, 353DTB-24, 353TB-18, 353TB-24, 353TS-22 only. Make sure both centerline marks are level. -
Dry Wall Option:
Place mounting brackets into the desired position. Using brackets as a guide, carefully drill 5/16″ holes into the wall. Remove brackets and install anchors.
Note:
For plaster walls 1/2″ thick or less, insert toggle tool into toggle to secure behind wall prior to installing accessory trim. -
Stud Option:
Center bracket on the centerline. Using brackets as a guide, carefully drill 3/16″ holes into the wall. -
With mounting brackets in position, secure to wall using screws. Use bracket as screw template
-
Secure with set screw.
-
Hang the top of the accessory on the mounting bracket. Lower into position.
353-SD2 Only: Carefully drill 5/16″ holes into the wall and install anchors. Secure to wall using screws.
Troubleshooting Chart
| Problem | Cause | Solution |
|---|---|---|
| The finish is spotting. | **** Elements in the water supply may cause water | |
| staining on the finish. | Clean the finished trim area with a soft cloth using |
mild soap and water or a non-abrasive cleaner and then quickly rinse with water.
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: 800-796-6667 Fax: 800-961-9621 Copyright © 2021 Symmons Industries, Inc. symmons.com. gethelp@symmons.com. ZV-1098 REV L 031022.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>