LEDGE Signature Slide User Guide
- June 8, 2024
- LEDGE
Table of Contents
Signature Slide
User Guide
For fun and effective setup, prepare to get wet. Throw on your bathing suit, gather your setup materials and jump in!
REQUIRED TOOLS
IMPORTANT NOTE
Moving the slide requires more than one person. Lift to move, do not drag the
Slide, as it will scratch and damage the product.
WARNING
One child at a time. Don’t stand/dive from slide.
Misuse leads to serious injury. Don’t use if physically impaired. Look for
people and objects below. Ages 3+ 70 lbs (32kg) weight limit. Adult
supervision required at all times. For use in maximum 18 in. water depth.
Failure to position slide in proper location could lead to serious injury or
death.
DANGER
FOR USE IN-POOL
STEP 1: Carefully remove Slide from packaging, place near tanning ledge
and grab your water hose.
STEP 2: Using the included key, remove the plug at the top of the Slide
deck. Do not discard the removed plugs, you will use them again in Step 5.
STEP 3: Place the slide inside your pool on your tanning ledge. The slide will
be buoyant to start.
STEP 4: Using a water hose, fill the Slide while making sure it remains in
your desired location on the ledge. Once filled, repositioning could damage
the Slide.
STEP 5: Once the Slide is filled completely, replace plug at the top of the
slide deck.
STEP 6: Time to play! Take a photo, share it on social media and tag
LEDGELOUNGER. We care about all of our little Ledge Lounger lovers, so
remember, adult supervision while using the Slide is required.
Alternate setup methods are not recommended. Please adhere to the guidelines
outlined above to avoid scratching or damaging your Barstool.
REMOVAL
STEP 1: Using the included key, remove the plug underthe step closest to the floor and the plug at the top of the Slide deck.
STEP 2: The water will begin draining unassisted and the Slide will become
more buoyant as the water level decreases.
STEP 3: Once the Slide is mostly empty, grab the front end and carefully tilt
to further assist with water removal.
STEP 4: Carefully remove the Slide from the pool. If a small amount of water
remains, remove the plug at the bottom of the slide and gently rotate until
completely empty.
Alternate removal methods are not recommended. Please adhere to the guidelines
outlined above to avoid scratching or damaging your Slide.
HELPFUL TIPS
Clean often to prevent calcium build up.
You can extend the life of your fabric products by storing them in a clean,
shaded place when not in use.
Always use caution when moving or rearranging your Ledge Lounger products to
avoid scratching or damage.
If you need Umbrella spacers or additional plugs, contact us via the contact
form on our website. For more tips please visit
ledgeloungers.com/faq
PRODUCT CARE
Your Ledge Lounger is made of ultra durable, high quality materials. It is
designed for the pool environment and resistant to sun, weather, and the
reasonable chemical levels of a well maintained pool.
We encourage you to leave your Ledge Lounger in the pool even when not in use.
However, when adding shock or other highly concentrated chemicals to your
pool, remove all Ledge Lounger products, and return to the pool only once
chemical levels are back to normal.
In the event of a freeze, please remove your Ledge Lounger products from the
water, drain, and store in a safe location.
CLEANING YOUR FUNITURE
Always use a soft bristle brush or cloth when cleaning your Ledge Lounger
furniture. For routine cleaning, just use water.
For a deeper clean, remove from the pool and use a mild household cleaner or a
Magic Eraser.
Depending on the calcium levels of your pool, you may notice a white powder
like coating develop on your furniture. If this occurs, we recommend cleaning
it with CLR Calcium, Lime and Rust Remover.
YOU INSPIRE US. MARCO! POLO! YOUR TURN…
#LEDGELOUNGER
Documents / Resources
|
LEDGE Signature
Slide
[pdf] User Guide
Signature Slide, Signature, Slide
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>