SYMMONS 673RH 18 Inch Towel Bar Instruction Manual
- June 13, 2024
- SYMMONS
Table of Contents
SYMMONS 673RH 18 Inch Towel Bar
Accessories
Operation & Maintenance Manual
Model Numbers
-
673RH
Identity Robe Hook -
673TB-18
Identity 18″ Towel Bar -
673TB-24
Identity 24″ Towel Bar -
673TP
identity Toilet Paper Holder -
673TR
identity Towel Ring
Modifications
- STN Satin Nickel finish
Note: Append appropriate -suffix to model number.
Dimensions
Note: Dimensions subject to change without notice.
Specification
Accessories made from metal construction, plated in standard polished chrome finish. Includes durable anchors for 1/2″ drywall or tile applications and features a universal mounting kit. When installed properly, the anchors hold a maximum weight of 50 lbs.
Warranty
- Limited Lifetime – to the original end purchaser in consumer/residential installations.
- 10 Years – for commercial/industrial installations. Refer to www.symmons.com/warranty for complete warranty information.
- WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Measurements| | Replacement Parts|
---|---|---|---
A| | Description
Part Number|
B| Hole Size
0 5/16”. 8 mm
| | Mounting Hardware Kit| RA-017 (2x) required for: 673TP 673TB-18 673TB-24|
C| 1-13/16”.46mm|
D| 1-13/16”.46mm|
E| 8-1/2”. 216 mm|
F| 2-7/8”. 73 mm|
Tools Required|
G| 6-13/16″, 173 mm|
Allen Wrench (3/32″)| |
H| 8 1/4”. 210 mm|
| 17-3/4”. 451 mm|
J| 2-7/8”. 73 mm|
K| 23-5/8”. 600 mm| Phillips Head Screwdriver| |
|
Drill| |
Installation
- Measure and mark centerlines for mounting bracket installation using dimensions on page 1. Note: 673TB-18, 673TB-24 and 673TP only. Make sure both centerline marks are level.
- Dry Wall Option: Place mounting brackets into desired position. Using brackets as a guide, carefully drill 5/16″ holes into wall. Note: For plaster walls 1 /2″ thick or less, insert toggle tool into toggle anchor to secure behind wall prior to installing accessory trim.
- Stud Option: Place mounting brackets into desired position.
- With mounting brackets in position, secure to wall using screws.
- Hang top of accessory on mounting bracket. Lower into position.
- Secure with set screw.
Troubleshooting Chart
-
Problem
Finish is spotting. -
Cause
Elements in water supply may cause water staining on finish. -
Solution
Clean finished trim area with a soft cloth using mild soap and water or a non- abrasive cleaner and then quickly rinse with water.
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone:
800-796-6667 Fax:
800-961-9621
Copyright© 2022 Symmons Industries, Inc.
www.symmons.com
gethe1p@symmons.com ZV-3195 REV B 031022