SYMMONS IM600 IceMate Valve Instruction Manual

June 3, 2024
SYMMONS

SYMMONS IM600 IceMate Valve

SYMMONS-IM600-IceMate-Valve-PRODUCTOperation & Maintenance

Model Numbers

IM600 IceMate TM Supply Box with Valve

Options/Modifications

A Water Hammer Arrestor Size AA
P1 Crimp PEX
P2 Cold Expansion PEX

Note: Append appropriate -suffix to model number.

Compliance

  • ASME A112.18.1/CSA B125.1
  • NSF 61.9, NSF 372
  • ASSE 1010 (IM600A only)

Feature Highlights

• Installation straps for 16″ O.C. stud mounting or direct-to-stud mounting.
• Ice Maker Valve.
• 1/2-14 NPSM with 1/2″ Sweat Inlets 1/4″ Outlet.
• Valve can be installed as bottom or top supply.
• Accommodates 1 layer of 1/2″ drywall up to 2 layers of 5/8″ drywall.
• Mounting straps.

Warranty

SYMMONS-IM600-IceMate-Valve-FIG-2

Limited Lifetime – to the original end purchaser in consumer/residential installations.
10 Years – for commercial/industrial installations. Refer to www.symmons.com/warranty for complete warranty information.

Dimensions

SYMMONS-IM600-IceMate-Valve-FIG-3

Measurements

A| 7″, 178 mm
B| 6-5/8″, 168 mm
C| 17-1/2″, 445 mm
D| Min. 1/2″, 13 mm Max. 1-1/4″, 32 mm
E| 2-7/8″, 72 mm

Note : Dimensions subject to change without notice.

Installation

Section A: (Steps 1-7)SYMMONS-IM600-IceMate-Valve-
FIG-4

  1. Slide straps in mounting tabs

  2. Attach strap to studs with user provided screws

  3.  Insert provided screws through tabs to secure box in place
    Section B: (Step 4)

  4. Knockout inside hole of supply box for water supply

  5.  Secure valve to box with supplied nut

  6.  Connect supplies to valves with either:

    • a. Sweat connect
    • b. P1 Option – Crimp PEX or
      P2 Option – Cold Expansion PEX
  7.  Check for leaks
    Section C (Steps 8 & 9)

  8.  Complete finish wall

  9.  Press on covers

    • a. If finish wall is 1/2’’ thick, break tabs from cover off
    • b. If 2 layers of 5/8” drywall leave tabs on
      Section D (Step 10) Direct Stud Installation:
  10.  Mount box on adjacent side of wall stud with provided tabs
    Section E (Step 11) Surface Mount Installation:

  11.  Drill holes out of box and use user provided screws to attach to wall

Documents / Resources

| SYMMONS IM600 IceMate Valve [pdf] Instruction Manual
IM600 IceMate Valve, IM600, IceMate Valve, Valve
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals