Overstock TV Cabinet User Manual
- June 3, 2024
- Overstock
Table of Contents
Overstock TV Cabinet
PARTS INCLUDED
TOOLS INCLUDED
- Please turn the bottom of the “A ” board over.
- Take out the side plate “D” and connect it with the assembled “ABC.
- Take out “F, F2″‘and “e” and assemble them as shown in the figure.
- Take out the “‘g’ plate and installit as shown in the figure.
- Place the backplane as shown in the figure according to the backplane slot.
- Place the laminate support frame as shown in the figure.
- Place the twolaminates on the support bracket.
Thank you for purchasing this product. To use this product, please plug it into a 12VDC power supply. Please use ifthe product works normally after connecting to power.
Introduction
The box is an intelligent controller. t has 2 USB output ports and can distribute the current output up to SVDC-2A. With 2 touch buttons, it can turn ON/OFF the light, change light colors,and adjust the light luminance.
ATTENTION PLEASE
- It there is no touch response suddenly, Re-plug the power to reset the touch static electricity.
- If bubbles appear on the panel, remove the protective film.
Operation
This touch button is used to turn on/ott, change colors, and adjust brightness.
A. Short touch -> lighting on -> short touch -> change light color -> short touch-> change light color-> short touch-> lighting off. B. Long touch-> adjust the luminance
This touch button is used to turn on/oft the induction function.
- A. Short touch to turn on the induction function. It can auto-turn on the light when people are close to the controller in 4 meters. It can auto power off the light when the body is far away from the controller after 30 seconds.
- B. Long touch to turn off the induction function.
- C. Note : When you touch the light button to change the light modes, the induction function will automatically turn off. It is best to turn on this function after selecting the light color and adjusting the brightness you want.
Read User Manual Online (PDF format)
Loading......