Overstock SE SD 8013WI Assembly Instructions
- June 6, 2024
- Overstock
Table of Contents
ASSEMBLY INSTRUCTIONS
SE SD 8013W1
Thank you for you purchase.
Before assembly, please read these instructions. Please read all warnings.
Store this instruction manual for future reference.
Product Size | Approximately 520 Width x 900 Length x 1490 Height (MM) |
---|---|
Main Materials | MDF (Medium Density Fiberboard) |
Weight Capacity | Top insert: About 40KG, Shelf insert: About 10KG, X These are |
measured figures, not guaranteed figures.
Time To Assembly| About 70 Minutes
Assembly Warning
- Assembling with 2 or more people is recommended.
- Please assemble at a spacious and flat place
- Please place blankets or cardboard so the floor or walls will not be scratched
- Please ventilate the area if there is a strong glue odor after opening the product
- Please follow assembly instructions
- Please have the below tools ready before assembling
– Screwdriver, Scissors or Blade Box cutter, Rubber hammer, Drill
Hardware
Before assembly, inspect unit for missing parts. Be sure that children do not accidentally swallow these parts. Same-sized parts are in a bag. Please check the size of the screws.
Parts
- Dekstop Panel 1 Pc
- Side Panel (L) 1 Pc
- Side Panel (R) 1 Pc
- Back Stand Panel (L) 1 Pc
- Back Stand Panel (R) 1 Pc C6
- Top Panel 1 Pc
- Above Side LT Panel (L) 1 Pc
- Above Side Panel (R) 1 Pc Stand Panel 1Pc
- Center Shelf Panel 1 Pc
- Shelf Panel 1 Pc
- Back Mdf Board 1 Pc
Assembly Information
Assembly Step
Failure to follow these directions could cause poor strength or stability. Insert screws loose to line up with slots then tighten up each screw.
Safety
Please read the below warnings before use.
Failure to follow these warnings could result in serious injury.
CAUTION
Purpose
- Do not use this unit except for the original application
- This unit is for household use. Do not use it for wholesale.
- This unit is for indoor use. Do not use it outside.
Assembly
- Assembling with 2 or more people is recommended
- Please assemble at a spacious and flat place
- Please place blankets or cardboard so the floor or walls will not be scratched
- Please ventilate the area if there is a strong glue odor after opening the product
- Please follow assembly instructions
Placing The Unit
- Store the unit on a flat surface.
- Place a mat under the unit if you place it on wood floors for floor protection
- Do not place the unit in areas where conditions are extreme, such as direct sun or a humid place
- Do not place the unit in a hot or humid area, such as near the heater or fireplace
Usage
- Please check your surroundings when you use this unit
- Do not place any hot or wet objects on the unit
- Remove all objects on the unit when you move it
- Do not leave water or wet objects on the surface.
- Do not use it for toys
- Do not stand on it or use it for a step stool.
- Do not overload only the top drawers. Load the same amount to help prevent tipping of the unit.
- Do not leave drawers open or put pressure on opened drawers to help prevent falling or wrecking.
- Do not stand or put pressure on opened drawers.
- Colors could fade
- Please open drawers slowly
- Make sure you do not catch your finger when you use the drawer.
- Weight Capacity Top insert About 40KG, Shelf insert: About 10KG,
These are measured figures, not guaranteed figures
Cleaning
- Please check all assembled parts are tight regularly. (About once a month)
- Use dry soft cloths for dust and spots
- For heavy spots, use clothes with neutral detergent then dry in a well-ventilated area.
- Do not use if any parts are broken.
- Please recycle the unit or its package depending on your city rules.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>