OVERSTOCK WF294586AAG Country Gray Solid Platform Full Bed with Oak Top Instruction Manual

OVERSTOCK WF294586AAG Country Gray Solid Platform Full Bed with Oak Top

Item No: WF294586AAG
Description: FULL BED

Thank you for purchasing this quality product. Be sure to check all packing material carefully for small part that may have come loose inside carton during shipment.

Product Information

Full Bed

This product is a full bed made in Malaysia that comes with assembly instructions. The bed includes upper and lower slats support, headboard (HB) slats, lower slats support for HB, HB pillar – L and R, HB support rail, top panel, FB slats, lower slats support for FB, FB pillar – L and R, bed side rail, center support rail, center support leg, bed slats, wood dowel M8x30MM, U bracket, screw M3.5x16MM, minifix + cap, iron plate, bed bracket – 2L2R FL FR, hex nut, spring washer, spanner, bolt, allen key M5, screw M4 x 32MM. The bed requires a screwdriver for assembly and the hardware list includes 16 wood dowel M8x30MM, 2 U bracket, 44 screw M3.5x16MM, 8 sets of minifix + cap, 4 iron plate, 4 bed bracket – 2L2R FL FR, 10 hex nut, 10 spring washer, 1 spanner, 8 bolt, 1 allen key M5, and 20 screw M4 x 32MM.

Product Usage Instructions

Step 1: Attachment of Wood Dowel and Brackets

1. Attach wood dowel M8 x30 MM (A) to Upper Slats Support (1), Lower Slats Support – HB (3), HB Support Rail (5) and Lower Slats Support – FB (9).
2. Attach U Bracket (B), Iron Plate (E), and Bed Bracket (F) to parts (4,5,6,9,10,11,12) accordingly using Screw M3.5 x 16MM (C).
3. Attach Minifix (D) to Top Panel (7).

Step 2: Headboard Assembly

1. Slot in HB slats (2) to Upper Slats Support (1), then slot the Lower Slats Support – HB (3) in.
2. Attach the connected parts and HB Support Rail (5) to HB Pillar – L (4) and lock with Hex Nut (G) and Spring Washer (H) using Spanner (I) provided.
3. Attach the connected parts again to HB Pillar – R (6) and lock with Hex Nut (G) and Spring Washer (H) using Spanner (I) provided.
4. Finally, connect Top Panel (7) to the Headboard and lock with Minifix Cap (D2).

TOOLS REQUIRED (Not provided)

• Screwdriver

Hardware List

Part List

Installation Instructions

• Step 1
  • Attach Wood Dowel M8 x30 MM (A) to Upper Slats Support (1), Lower Slats Support – HB (3), HB Support Rail (5) and Lower Slats Support – FB (9). Attach U Bracket (B), Iron Plate (E), and Bed Bracket (F) to parts (4,5,6,9,10,11,12) accordingly using Screw M3.5 x 16MM (C). Attach Minifix (D) to Top Panel (7).
• Step 2
  • Headboard (HB) assembly.
  • First slot in HB slats (2) to Upper Slats Support (1), then slot the Lower Slats Support – HB (3) in.
  • Attach the connected parts and HB Support Rail (5) to HB Pillar – L (4) and lock with Hex Nut (G) and Spring Washer (H) using Spanner (I) provided.
  • Attach the connected parts again to HB Pillar – R (6) and lock with Hex Nut (G) and Spring Washer (H) using Spanner (I) provided.
  • Finally, connect Top Panel (7) to the Headboard and lock with Minifix Cap (D2)
• Step 3
  • Footboard (FB) assembly.
  • First slot in FB slats (8) to Upper Slats Support (1), then slot the Lower Slats Support – FB (9) in.
  • Attach the connected parts to FB Pillar – L (10) and lock with Hex Nut (G) and Spring Washer (H) using Spanner (I) provided.
  • Attach the connected parts again to FB Pillar – R (11) and lock with Hex Nut (G) and Spring Washer (H) using Spanner (I) provided.
  • Finally, connect Top Panel (7) to the Footboard and lock with Minifix Cap (D2)
• Step 4
  • Connect Bed Side Rails (12) to Headboard and Footboard with Bolt (J) using Allen Key M5 (K)
• Step 5
  • Attach the Center Support Rail (13)(14) to the bed.
• Step 6
  • Attach Bed Slats (15) to the bed using Screw M4 x 32MM (L).

Completed assembly

MADE IN MALAYSIA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>