Shark AW201 Series HydroVac Pro XL Cordless Quick Start Guide
- October 28, 2023
- Shark
Table of Contents
Shark AW201 Series HydroVac Pro XL Cordless Quick Start Guide
AW201 SERIES QUICK START GUIDE
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
1. WHAT’S INSIDE
A. Handle and Pole
B. Main Body
C. Charging Dock
D. Shark Hydrovac™ Multi-Surface Concentrate E Owner’s Guide
F. Additional Brushroll
2. ASSEMBLY
Align the pole with the opening in the Main Body and insert firmly until it clicks into place.
3. DOCK CHARGING
1. Before first use, charge Shark HydroVacTM for 4 hours.
2. To charge, place HydroVac on dock. Battery icon will illuminate when
charging begins.
3. Battery icon will turn off when unit is fully charged.
4. FILLING THE CLEAN SOLUTION TANK
1. Press the release button and lift off the tank.
2. Remove cap from tank and add water, up to WATER line.
3. Add cleaning concentrate*, up to HYDROVAC CONCENTRATE line.
4. Replace cap and reinsert tank until it clicks into place.
Only use Shark HydroVac™ Multi-Surface Concentrate, Shark HydroVac™ Disinfectant, and water with this product.
5. USING THE HYDROVAC
1. Press the Power button on the handle to turn on power. Tilt the handle back to start cleaning in Hard Floor Mode, the optimal setting for cleaning bare floors.
2. To switch to the optimal setting for cleaning area rugs, press the Area Rug Mode button.
6. ACTIVATING SELF-CLEAN CYCLE
Recommended after every use.
1. Make sure Clean Solution Tank is at least half full.
2. Make sure Dirty Water Tank is empty.
3. Place Shark HydroVacTM on charging dock.
4. Press Power button to start 2-minute self-clean cycle. The Self-Clean Mode
icon will pulse.
5. DO NOT remove unit from dock during cycle. Icon will turn off when
complete.
For questions or to register your product, contact us at: 800-798-7398
or visit us online at sharkclean.com
Social Media @sharkcleaning
Download
Shark AW201 Series HydroVac Pro XL Cordless Quick Start Guide – [Download PDF]