AIMIBO G4G Wireless HD Transmitter and Receiver Kit User Manual

AIMIBO G4G Wireless HD Transmitter and Receiver Kit

Connection Diagram

Receiver-RX

Transmitter-TX )

Hardware e Casting
Wireless HDMI Receiver and Transmitter, Plug and Play

1. Plug HDMI cable to Connect the Receiver and TV or other HDMI input devices; Or plug VGA to connect the Receiver and TV or other HDMI input devices.(VGA cable not included)

2. Plug USB C cable to Receiver and a wall charger (5V/2A)

3. Switch the TV to HDMI channel, then shoW out the blue screen

4.  For the first time use, you need to choose the language by pressing the behind button of Receiver, then long press 2-5 seconds to confirm. If you need to change language, long press it for 10 seconds, the system will automatically
   restore.

5. Plug the Transmitter into the laptop or other HDMI output devices, and plug the USB C cable to the laptop s USB port. The indicator light up, wait 10 seconds for auto-sync. Some HMDI output ports can supply power to the transmitter, with no need to use the USB-C power charging, and work the same.

Pairing instructions

The product has been paired out of the factory. In case of pairing failure due to improper operation or other circumstances during use, it is necessary to restore and re-pair the device as follows:

1.  Connecting transmitter and receiver to devices
2.  long press the Receiver sbehind button for 3 seconds, then TV will show out Release the button to pair with EZCast TX”
3. Long press the Transmitter middle button for 3 seconds, when the indicator light is oft, release the button, then indicator light would flashes quickly after restarting,TV will show out Pairing-OK.
   One Receiver can be matched with 8 Transmitters at the same time. Switch one by one by pressing the middle button of the Transmitter. Please noted, every Transmitter needs to be paired well with the Receiver.

Steps to directly connect the phone to the screen Connect to Home Router

WiFi)

When using it for the first time, please give priority to connecting the device to the home WiFi router

1. Click WiFi on your phone settings page, and connect your phone to MiraScreen Wi-Fi(Name is RX-Bxxxoox Default password is 12345678)
2. Turn on the Phone/ Pad Browser, input 192.168.203.1
3. Click Internet, and Choose your Home WiFi.
4. Connect the Input password and click Enter. The function applies to: iPhone/iPad/Android Devices.

Setup for ioS

Direct Connect for ioS

1. Connect your iPhone to your home Wi-Fi. Make sure both the dongle and mobile phone are connected to the same Home wifi.

2. If the dongle fails to set Step 1Use iPhone/ iPad’s Setting WiFi, find the Hot Spot of MiraScreen, and connect it.
   (RX-BXXXXX Password: 12345678)
   RX-BXXXXXX

3. Slide the Screen and go to Apple’s control center, click. “Airplay Mirroring”, then select RX-BXXXXKX tv RX-BXXXXXXX

Setup for Android Method 1 (No need to set Step 1)

1. Open the phone settings 2. Find the Cast function of your phone 3. Select MiraScreen as the target The cast function names of different brands may be different. HUAWEI: Setting Smart Assist> Multi-screen interactive Xiaomi: Settings-Connection&Sharing-Cast (Turn on cast) OnePlus: Settings – Bluetooth& device connection – cast OPPO: Settings-Other wireless connections- Screencast MEIZU: Setting-Display> Projection Screen Lenovo: Setting Display> Wireless Display SAMSUNG: Phone From Top To Bottom> Smart View VIVO: Settings>Other networks and connections> Smart Mirroring>Connect to a TV Setting icon (Right top corner)>Screen mirroring For more models, please contact our customer service Method 2 Use Google home to connect dongle “Need to set step 1 (please confirm that your purchased product and mobile phone support Google home function) 1. Turn on the Android phone WiFi and confirm that the phone WiFi and the device are connected to the same WiFi Home network.
2. Open Google Home, wait ten seconds will search the device (RX-Bxooox), and Click it to implement screen mirroring (If the Mira Screen-xooxox can not be found please refresh the homepage of Google Home. verify that the Wireless HDMI Dongle and your phone are in the same home Wi-Fi, or restart your phone or device.

RX-BxxxxXKx

Dos and Don’ts and Troubleshooting

1. This device is used for the transmission of data via WiFi. Please don’t cloak the device with metal.
2. The device is poor in wall-penetrating capability. Please don’t use it where there are partition walls.
3.  For the availability of a good experience, the phone or computer is ideally 3-5 meters away from the device.
4. If the TV interface still does not display properly or SSID, Password, IP still doesn’t appear after replacing the 5V2A power adapter, please contact After-Sales via post-sales email and we will address your issues as soon as possible.
   Technical support email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>