AiMiBO G48Q3 Wireless HD Transmitter and Receiver Kit User Manual

AiMiBO G48Q3 Wireless HD Transmitter and Receiver Kit

Connection Diagram

Receiver-RX

Transmitter-TX

Hardware Casting

Wireless HDMI Receiver and Transmitter, Plug and Play

1. Plug HDMI cable to connect Receiver and TV or other HDMI input devices; Or plug VGA to connect Receiver and TVor other HDMI input devices.(VGA cable not included)
2. Plug USB C cable to Receiver anda wall charger (5V/2A)
3. Switch the TV to HDMI channel, then show out the blue screen
4. In the first time using, you need to choose the language by press the behind button of Receiver, then long press 2-5 second to confirm. If you need to change language, long press it for 10 seconds, the system will automatically restore
5. Plug Transmitter to laptop or other HDMI output devices, and plug USBC cable to laptop USB port Indicator light up, wait 10 seconds for auto sync.
   Some HMDI output ports can supply power to the transmitter, no need to use the USB-C power charging and work the same.

Pairing Instructions

The product has been paired out of the factory. In case of pairing failure due to improper operation or other circumstances during use, it is necessary to restore and re pair the device as follows:

1. Connecting transmitter and receiver to devices
2. long press Receiver sbehind button for 3 seconds, then TV will show out” Release the button to pair with EZCast TX”
3. Long press Transmitter s middle button for 3 seconds, when indicator light is off, release the button, then indicator light would flashes quickly after restarting,TV will show out Pairing-OK.
   • One Receiver can be matched with 8 Transmitters at the same time.
   • Switch one by one by pressing the middle button of Transmitter
   • Please noted, every Transmitter needs to be paired well with Receiver.

Steps to directly connect the phone to the screen
(Connect to Home Router WiFi)
When using it for the first time, please give priority to connecting the device to the home WiFi router

1. Click WiFi on your phone settings page, connect your phone to Mira Screen Wi-Fi
   (Name is RX-Bxoooxx Default password is 12345678)

2. Turn on Phone/ Pad Browser, input 192.168.203.1

3. Click Internet, Choose your Home WiFi.

4. Connect Input password and click Enter
   The function applies to: iPhone/iPad/Android Devices

Setup for iOS
Direct Connect for iOs

1. Connect your iPhone to your home Wi-Fi. Make sure both dongle and mobile phone are connected to the same Home wifi.

   • If the dongle fails to set Step 1
     Use iPhone/iPad’s Setting WiFi, find the Hot Spot of Mira Screen and connect it. (RX-BXO00X Password: 12345678)

2. Slide Screen and go to Apple’s control center, click.
   Airplay Mirroring”,then select RX-BXOKX

Setup for Android
Method 1 (No need to set the Step1)

1. Open the phone settings
2. Find the Cast function of your phone
3. Select Mira Screen as the target

The cast funtion name of different brands may be different.

• HUAWEI: Setting Smart Assist – Multi-screen Interactive
• Xiaomi: Settings>-Connection&Sharing-Cast (Turn on cast)
• OnePlus: Settings – Bluetooth & device connection – cast
• OPPO: Settings-Other wireless connections>Screen cast
• MEIZU: Setting-Display> Projection Screen
• Lenovo: Setting Display >Wireless Display
• SAMSUNG: Phone From Top To Bottom> Smart View
• VIVO: Settings>Other networks and connections-Smart Mirroring-Connect to a TV
  Setting icon (Right top corner)Screen mirroring
  For more models, please contact our customer service

Method 2 Use Google home to connect dongle “Need to set step 1 (please confirm that your purchased product and mobile phone support Google home function)

1. Turn on the Android phone WiFi and confirm that the phone WiFi and the device are connected to the same WiFi Home network.
2. Open Google Home, wait ten seconds will search the device (RX-Bxxoox). and Click it to implement screen mirroring
   (If the Mir Screen-xooox can not be found please refresh the homepage of Google Home. verity that the Wireless HDMI Dongle and your phone are in the same home Wi-Fi, or restarting your phone or device).

Dos and Don’ts and Troubleshooting)

1. This device is used for transmission of data via WiFi. Please don’t cloak the device with metal.
2. The device is poor in wall-penetrating capability. Please don’t use it where there are partition walls.
3. For the availability of a good experience, the phone or computer is ideally 3-5 meters away from the device.
4. If the TVinterface still does not display properly or SsID, Passward, IP still doesn’t appear after replacing the 5V2A power adapter, please contact After-Sales via post-sales email and we will address your issues as soon as possible.

Technical support email: Support@Aimibo.tv

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>