AIMIBO G48 Wireless HD Transmitter and Receiver Kit User Manual

AIMIBO G48 Wireless HD Transmitter and Receiver Kit User Manual

Connection Diagram

Receiver RX

Transmitter TX

Hardware Casting

1. Plug HDMI cable to connect Receiver and TV or other HDMI input devices; Or plug VGA to connect Receiver and TV or other HDMI input devices.(VGA cable not included)

2. Plug USB C cable to Receiver and a wall charger (5V/2A)

3. Switch the TV to HDMI channel, then show out the blue screen

4. In the first time using, you need to choose the language by press the behind button of Receiver, then long press 2-5 second to confirm.
   If you need to change language, long press it for 10 seconds, the system will automatically restore.

5. Plug Transmitter to laptop or other HDMI output devices, and plug USB C cable to laptop’ s USB port.
   Indicator light up, wait 10 seconds for auto sync.
   Some HM DI output ports can supply power to the transmitter, no need to use the USB-C power charging and work the same.

Pairing Instruction

The product has been paired out of the factory.
In case of pairing failure due to improper operation or other circumstances during use, it is necessary to restore and re pair the device as follows:

1. Connecting transmitter and receiver to devices
2. long press Receiver’ s behind button for 3 seconds, then TV will show out ” Release the button to pair with EZ Cast TX”
3. Long press Transmitter’ s middle button for 3 seconds, when indicator light is off, release the button, then indicator light would flashes quickly after restarting, TV will show out Pairing-OK.

One Receiver can be matched with 8 Transmitters at the same time.
Switch one by one by pressing the middle button of Transmitter.
Please noted, every Transmitter needs to be paired well with Receiver.

Steps to directly connect the phone to the screen

(Connect to Home Router Wi-Fi)
When using it for the first time, please give priority to connecting the device to the home WiFi router

1. Click WiFi on your phone settings page, connect your phone to Mira Screen Wi-Fi (Name is RX-Bxxxxx Default password is 12345678).
2. Turn on Phone / Pad Browser, input 192.168.203.1
3. Click Internet, Choose your Home WiFi.
4. Connect Input password and click Enter. The function applies to: iPhone/iPad/Android Devices.
   

Setup for iOS

Direct Connect for iOS 1

1. Connect your iPhone to your home Wi-Fi. Make sure both dongle and mobile phone are connected to the same Home Wi-Fi.
   If the dongle fails to set Step 1
   Use iPhone / iPad’s Setting Wi-Fi , find the Hot Spot of Mira Screen and connect it.
   (RX-BXXXXX Password: 12345678)
   

2. Slide Screen and go to Apple’s control center, click. “Airplay Mirroring”, then select RX-BXXXXXX
   

Setup for Android

Method 1 (No need to set the Step 1)

1. Open the phone settings
2. Find the Cast function of your phone
3. Select Mira Screen as the target

The cast function name of different brands may be different.

• HUAWEI: Setting > Smart Assist > Multi-screen Interactive
• Xiaomi: Settings>Connection & Sharing>Cast (Turn on cast)
• OnePlus: Settings – Bluetooth & device connection – cast
• OPPO: Settings>Other wireless connections>Screencast
• MEIZU: Setting-Display > Projection Screen
• Lenovo: Setting Display > Wireless Display
• SAMSUNG: Phone From Top To Bottom > Smart View
• VIVO: Settings>Other networks and connections>Smart Mirroring>Connect to a TV> Setting icon (Right top corner)>Screen mirroring
  ( For more models, please contact our customer service )

Method 2 Use Google home to connect dongle *Need to set step 1 (please confirm that your purchased product and mobile phone support Google home function)

1. Turn on the Android phone Wi-Fi and confirm that the phone Wi-Fi and the device are connected to the same Wi-Fi Home network.
2. Open Google Home, wait ten seconds will search the device (RX-Bxxxxx), and Click it to implement screen mirroring (If the Mira Screen -xxxxx can not be found please refresh the homepage of Google Home. verity that the Wireless HDMI Dongle and your phone are in the same home Wi-Fi , or restarting your phone or device).

Dos and Don’t and Troubleshooting

1. This device is used for transmission of data via Wi-Fi. Please don’t cloak the device with metal.
2. The device is poor in wall-penetrating capability. Please don’t use it where there are partition walls.
3. For the availability of a good experience, the phone or computer is ideally 3-5 meters away from the device.
4. If the TV interface still does not display properly or SSID, Password, IP still doesn’t appear after replacing the 5V2A power adapter, please contact After-Sales via post-sales email and we will address your issues as soon as possible.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authori-ty to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

SUPPORT

Technical support email: Support@Aimibo.tv

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>