AIMIBO B09XK92V8Z Inversor Wireless HD Transmitter and Receiver Kit User Manual
- June 5, 2024
- AIMIBO
Table of Contents
AIMIBO B09XK92V8Z Inversor Wireless HD Transmitter and Receiver Kit
Connection Diagram
Receiver-RX
Transmitter-TX
Hardware Casting
Wireless HDMI Receiver and Transmitter, Plug and Play
Receiver connect method
Transmitter connect method
- Plug HDMI cable to connect Receiver and TV or other HDMI in put devices; Or plug VGA to connect Receiver and TV or other HDMI in put devices. (VGA cable not included)
- Plug USB C cable to Receiver and a wall charger (5V /2A)
- Switch the TV to HDMI channel, then show out the blue screen
- In the first time using, you need to choose the la nguage by press the behind button of Receiver, then long press 2-5 second to confirm. If you need to change language, long press it for 10 seconds, the system will automatically restore.
- Plug Transmitter to laptop or other HDMI output devices, and plug USB C
cable to laptop’s USB port. Indicator light up, wait 10 seconds for auto sync.
-
Some HMDI output ports can supply power to the transmitter, no need to use the USB-C power cha rging and work the same.
Pairing Instructions
The product has been paired out of the factory. In case of pairing failure due to improper operation or other circumstances during use, it is necessary to restore and repair the device as follows:
- Connecting transmitter and receiver to devices
- Long press Receiver’s behind button for 3 seconds, then TV will show out” Release the button to pair with EZCast TX”
-
Long press Transmitter’s middle button for 3 seconds, when indicator light is off, release the button, then indicator light would flashes quickly after restarting,TV will show out Pairing-OK.
** One Receiver can be matched with 8 Transmitters at the same time.
Switch one by one by pressing the middle button of Transmitter.
Please noted, every Transmitter needs to be pa ired well with Receiver.
Steps to directly connect the phone to the screen
Connect to Home Router WiFi
When using it for the first time, please give priority to connecting the device to the home WiFi router
- Click WiFi on your phone settings page, connect your phone to MiraScreen Wi-Fi (Name is RX-Bxxxxx Default password is 12345678).
- Turn on Phone/ Pad Browser, input 192.168.203.1
- Click Internet, Choose your Home WiFi.
- Connect Input password and cl ick Enter.
The function applies to: iPhone/iPad/Android Devices.
Setup for iOS
Direct Connect for iOS
-
Connet your iPhone to your home Wi-Fi. Make sure both dongle and mobile phone are connected to the same Home wifi.
*If the dongle fails to set Step 1
Use iPhone / iPad’s Setting WiFi, find the Hot Spot of MiraScreen and connect it.(RX-BXXXXX Password: 12345678)
-
Slide Screen and go to Apple’s control center, click.
“Airplay Mirroring”,then select RX-BXXXXXX
Setup for Android
Method 1 (No need to set the Stepl)
- Open the phone settings
- Find the Cast function of your phone
- Select Mi raScreen as the target
The cast funtion name of different brands may be different.
HUAWEI: Setting> Smart Assist> Multi-screen Interactive
Xiaomi: Settings>Connection&Sharing>Cast (Turn on cast)
OnePlus: Settings – Bluetooth & device connection – cast
OPPO: Settings>Other wireless connections>Screencast
MEIZU: Setting-Display> Projection Screen
Lenovo: Setting Display> Wireless Display
SAMSUNG: Phone From Top To Bottom> Smart View
VIVO: Settings>Other networks and connections>Smart Mirroring>Connect to
a TV> Setting icon (Right top corner)>Screen mirroring
For more models, please contact our customer service
*Method 2 Use Google home to connect dongle Need to set step 1
(please confirm that your purchased product and mobile phone support Google
home function)**
- Turn on the Android phone WiFi and confirm that the phone WiFi and the device are connected to the same WiFi Home network.
- Open Google Home, wait ten seconds will search the device (RX-Bxxxxx), and Click it to implement screen mirroring
(If the MiraScreen-xxxxx can not be found please refresh the homepage of Google Home. verity that the Wireless HDMI Dongle and your phone are in the same home Wi-Fi, or restarting your phone or device).
Dos and Don’ts and Troubleshooting
- This device is used for transmission of data via WiFi. Please don’t cloak the device with metal.
- The device is poor in wall-penetrating capability. Please don’t use it where there are partition walls.
- For the availability of a good experience, the phone or computer is ideally 3-5 meters away from the device.
- If the TV interface still does not display properly or SSID, Password, IP still doesn’t appear after replacing the 5V2A power adapter, please contact After-Sales via post-sales email and we will address your issues as soon as possible.
Technical support email: Support@Aimibo.tv
