AIMIBO 711 Wireless HDMI Transmitter and Receiver Instruction Manual
- June 14, 2024
- AIMIBO
Table of Contents
AIMIBO 711 Wireless HDMI Transmitter and Receiver
Thank you for choosing our product. If you encounter any connection issues, please refer to the troubleshooting steps below. If they don’t resolve the issue, don’t hesitate to contact us. We’re always here to listen and help!
Our Warranty
90-day money-back guarantee
366-day free replacement
Contact way: Email: Support@aimibo.tv
Whatsapp
Precautions & Troubleshooting Issue
How to connect the transmitter and receiver?
Step 1: Connect the cable with an antenna to the RX and plug it into a
power outlet using an adapter, then plug RX into the HDMI input device.
Step 2: Select your preferred language.
Step 3: Connect the USB C cable to the TX and plug it into a power outlet
using an adapter, then plug the TX into the HDMI output device. Step 4: Wait
for 5 seconds to pair. The device will then automatically mirror.
How to repair it?
Step 1: Press and hold the middle button on the receiver until the screen
displays “release the button”.
Step 2: Press and hold the middle button on the transmitter until the
indicator light is off.
Step 3: Wait for 5 seconds until the screen shows “Paired is OK“, and the
device will automatically mirror.
How to connect a phone/tablet/laptop to a TV/monitor/projector?
Step 1: Connect the cable with an antenna to the RX and plug it into a
power outlet using an adapter, then plug RX into the HDMI input device.
Step 2
- For Windows devices: Press Win+P to find the mirror function and select “RX-BF3AE0BF”. Wait for it to automatically cast.
- For Android devices: Find the mirror function and select “RX-****”. Wait for it to automatically cast.
- For iOS devices:
- Go to the iPhone’s Wi-Fi settings and select “RX-****”.
- Click on the website and access the IP address “192.168.203.1”.
- Click on “Internet” choose your home Wi-Fi network and enter the password. Tap on Airplay and choose “RX-BF3AE0BF” to automatically stream.
The wireless HDMI transmitter & receiver are not working properly.
Cause 1: The pairing between the transmitter and receiver has been
disconnected. Solution: Please re-pair the transmitter and receiver.
Cause 2: The antenna signal of the receiver is not being properly
received. Solution: Please reinsert the connection sequence of the receiver in
the following order. First, connect the cable with an antenna to the RX and
plug it into a power outlet using an adapter, then plug the RX into the HDMI
input device.
Cause 3: Insufficient power supply.
Solution: Please try to connect to a power outlet through an adapter to
power the transmitter and receiver separately.
Cause 4: The transmitter supports up to 1080P output. If the HDMI output
device defaults to outputting 4K, the transmitter cannot normally transmit the
picture. Solution: Please modify the HDMI output device resolution to 1080
(computer, etc.).
Unable to pair, no SSID or password appeared on the blue screen interface.
Cause 1: The antenna signal of the receiver is not read normally.
Solution: Please reinsert the connection sequence of the receiver in the
following order. First, connect the cable with an antenna to the RX and plug
it into a power outlet using an adapter, then plug RX into the HDMI input
device.
Cause 2: Connect the wrong cable for the receiver
Solution: Please make sure that the TX is plugged into the USB C charging
cable, and the RX is plugged into the antenna & USB charging cable.
The screen frequently returns to the initial screen
Cause 1: The computer enters sleep mode.
Solution: Set the computer not to enter sleep mode.
Cause 2: Insufficient power supply.
Solution: Please try to connect to a power outlet through an adapter to
power the transmitter and receiver.
Stop working, and then can be used after some time.
Cause 1: When using this product for a long time in an unstable power
environment, the product temperature will be abnormal, and overheat protection
will be activated temporarily invalid.
Solution: Please try to connect to a power outlet through an adapter to
power the transmitter and receiver separately to ensure a stable power supply.
Cause 2: The connection port of household equipment has aged or failed.
Solution: Please connect other devices or HDMI interfaces for testing.
Stuttering occurs when playing videos
Cause
Since this product uses a wireless transmission system, images/sounds may
be interrupted due to the wireless radio wave environment. When there are many
wireless connections (such as Wi-Fi) nearby, channels in the same frequency
band may become congested.
Solution
- Enter the receiver setting page (192.168.203.1) and try to select 5G and the farthest channel for improvement.
- Ensure that the receiver’s antenna is not obstructed by equipment or the TV. For better signal stability, please move the antenna away from behind the TV.
- The fewer obstacles between the transmitter and receiver antennas, the more stable the signal transmission will be.
Only transmit images, no sound.
Cause 1: This product only supports 2.0 stereo sound and does not support
2.1 stereo sound, 5.1 stereo sound, 7.1 stereo sound, or Dolby Atmos sound.
Solution: Please check your audio settings on your output device. Change
it to 2.0 stereo sound.
Cause 2: Modify the audio output source of the laptop. Solution: Please
enter laptop audio settings and select “RX-****” as sound source output.
Unable to display in 4K
Cause 1
This product only supports mobile/tablet screen casting in 4K. If you use a
transmitter for HDMI signal transmission, it only supports up to 1080P output.
Solution: Please modify your HDMI output device’s resolution to 1080P
(computer, cable box, etc.).
Cause 2
The resolution of the receiver is set at the default factory setting of
1080P. You need to enter into receiver background settings to adjust the
resolution
Solution
- Use your phone’s wifi settings to connect with the receiver.
- Open your phone’s browser and enter into192.168.203 to enter into the receiver’s settings page. Click【resolution】,choose【3840x2160p】
How to change language?
Solution
Please hold down on the receiver for more than ten seconds for initialization，
then you can re-enter the language selection page.
Why my screen is black?
Cause: RX was plugged into the wrong HDMI output port or chose the wrong HDMI
channel.
Solution
- Please connect the RX to the HDMI port of your selected HDMI channel.
- If the HDMI port number and channel have no problem, please test the RX with the other monitor.
More stable and more fluid
Solution
If your video suddenly becomes very delayed, that may be caused by Wi-Fi
channel congestion. To avoid this, change the Wi-Fi channel to a less
congested one:
- Connect the receiver to your TV and power it on.
- Go to network settings and find “RX-BF3AE0BF” and enter password: 12345678.
- Enter the IP address “192.168.203.1” in your browser.
- Choose “WiFi channel”, and select the 5G WiFi mode.
- Choose a less congested WiFi channel between 36 and 161.
Note: You need to choose one that is far away from the current channel like the current is 40, you’d better to choose 161.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>