TARAMPS THS1900 Multi Channel Receiver Instruction Manual

TARAMPS THS1900 Multi Channel Receiver

Specifications

• Power: 60W RMS CLASS D
• Power Supply: Automatic bivolt (90-240V)
• Audio Inputs: USB, MICRO SD CARD, AUX (P2), AUX1, AUX2, BLUETOOTH, FM radio, Microphone input (P10)
• Maximum Supported Size: 64GB

Product Usage Instructions

Installation
The installation of this product must be done by a qualified professional.

Power On/Off
To turn the device on and off, use the ON/OFF switch located on the front panel. It is recommended to keep the device turned off when not in use. If not using the product for a long time, disconnect it from the power plug.

FAQ
Q: Can I use the USB input to connect to a computer or recharge other devices?
A: No, do not use the USB input for connecting to a computer or recharging other devices with batteries.

Instruction manual

The installation of this product must be made by a qualified professional.

Introduction

Congratulations on purchasing a Taramps product.
Developed in a modern laboratory, with highest technology and highly qualified professionals.
This manual explains all the resources, operations and guidelines for resolving questions that may arise in your installation. Take time to read it carefully and ensure the proper installation and use of all the benefits that this product can offer.
In case of doubt even after reading this manual, please contact our technical support at the number +55 18 3266 4050 or our website at www.taramps.com.br

Presentation
The TARAMPS THS 1900 is a Receiver developed with high technology to integrate different environments. Compact and powerful it can be used in several applications providing quality sound.

Application examples:

• Environment sound for stores, shops and clinics. It also allows, through the microphone input, warnings are transmitted via the sound system.
• In your leisure area, gourmet space, country house, etc. Including various audio input options, such as Bluetooth, AUX and USB, it allows the audio sources to be easily changed giving the user flexibility in choosing the preferred audio.

The equipment is an automatic bivolt and can be connected to any power plug between 90 and 240V. It has a switching power supply that is more efficient in the consumption of electricity. To turn the device on and off, use the ON/OFF switch located on the front panel. Keep turned off when not in use.
If you are not going to use the product for a long time, we recommend that you disconnect from the power plug.

Important recommendations

• The THS 1900 must be installed in  and ventilated place, away from heat and humidity places. Avoid locations with direct sunlight.
• Do not block the ventilation holes on the top and rear.
• Avoid falls and impacts.
• Carefully observe the polarity and impedance of the loudspeakers.
• Use cables according to the distance between the THS 1900 and the loudspeakers.

The table below shows the recommended gauges according to the distances:

• In case of unwanted noise make sure that the cables and connections are in good condition.

Audio source
The TARAMPS THS 1900 has the following audio inputs:

1. USB: Flash drive input *
2. MICRO SD CARD *
3. AUX (front): P2 standard auxiliary input
4. AUX1 and AUX2: RCA standard auxiliary inputs
5. BLUETOOTH
6.  FM radio
7.  Microphone input (standard P10)

The connected device must contain music in MP3 format to be identified by the equipment. Maximum supported size: 64GB.
We advise you to always have a good antivirus, so there are no problems with the Flash Drive or micro SD card when connecting to the product. Infected devices may cause undesirable effects to the THS 1900, such as: Slow music reading and general failures.
Do not use the USB input to connect to the computer or to recharge other devices that have batteries.

Package content

Knowing your equipment

Front Panel

1. MICRO SD: Micro SD memory card input. (The card must be positioned as the image shows, with the terminals facing up).

2. USB: Flash Drive input.

3. Aux. (P2 Connector): Receives audio signal from the P2 output of your phone, tablet, MP3, computer, among others. Use good quality cable to avoid unwanted noise.

4. Track – / Volume -:
   Short Touch: Rewind the music tracks in the USB/SD/BLUETOOTH. Reduce 0.1MHz of the frequency.
   Long Touch: Reduce the volume in all sources options. Automatic search to previous stations.

5. Play / Pause:
   Short Touch: Pause or start the music on USB / SD / BLUETOOTH. Advances next saved memory position of FM stations.
   Mute for AUXILIARY option.
   Long Touch: Searches for FM stations and saves them in memory.

6.  Track + / Volume +:
   Short Touch: Forward the music tracks in the USB/SD/ BLUETOOTH. Increase 0.1MHz of the frequency.
   Long Touch: Increase the volume in all sources options. Automatic search to next stations.

7. Mode / ON/OFF:
   Short Touch: Changes the source options, such as: USB / SD / AUXILIARY / BLUETOOTH / FM. Long Touch: Turns the player on or off, leaving only the microphone input active.

8. LED Display – Remote control IR sensor: For better communication between the remote control and the device, point the control at this point on the display.

9. MIC: P10 input for microphone.
   Recommendations: The microphone signal has low amplitude, so inappropriate use can cause unwanted noise. Use good quality cable and connectors, avoid tangling the cable and avoid being close to the speakers when in use, as this can cause feedback.

10. MIC VOL: Microphone volume adjustment. If you do not use the microphone, it is recommended to leave the volume at minimum. The MIC input is mixed with the other audio sources. To leave only the microphone active, turn off the player using the MODE key.

11. – EQUALIZATION: 2 band audio equalizer adjust.
    LOW: Bass frequencies
    HIGH: High frequencies.

12. VOL: Adjusts the output volume.

13. ON/OFF KEY: Turns the device on and off.
    When turned on, the panel lights up blue.

Rear Panel

1. POWER CABLE: Connect the original source that comes with the product.
   Attention: It is not recommended to use sources with voltage and amperage outside those specified.

2. SPEAKER OUT: To connect the loudspeakers. Follow the indicated polarity and the recommended minimum impedance of 0.66 ohms.

3. LINE OUT: The LINE OUT output allows you to send the audio signal (not amplified) to other equipment, such as a THS 3600, an active amplifier or subwoofer.
   This signal goes through the equipment’s equalization settings (LOW and HIGH).

4. AUX INPUT: L and R (RCA) input works in parallel with the front AUX input (connector P2).

5. FM ANTENNA: Indoor wire antenna for FM radio reception. Position the wire antenna in order to achieve the best FM reception.

6. BLUETOOTH ANTENNA: External antenna for better reception of the Bluetooth range.

Remote control functions

The THS 1900 has a compact remote control, so you can remotely control the device with practicality.

Bluetooth

When selecting the Bluetooth function (identified with “bt” on the display), the THS 1900 waits for a Bluetooth connection. Search for the device called “TARAMPS” using your phone, tablet, PC or other and match it.
To connect to a new device, disconnect the current one and make the new Bluetooth pairing. Bluetooth specification: class II with a 30m maximum range and may vary according to the environment (such as walls) and the connected device.

Bluetooth use example

Some TVs have an audio output system via Bluetooh. If your TV has this feature, it’s possible to transmit the audio to the THS 1900.
Consult your TV manufacturer’s manual.

Example of using an RCA connection

Connect control use example (Long range transmitter)
The THS 1900 is compatible with the CONNECT CONTROL, TARAMPS long range remote control which allows you to control your sound over wide distances and without the need to point the control at the device. The THS 1900 does not lose the functionality of the USB port, as the connect control allows a Flash Drive to be plugged into its USB port.

• For more details on the CONNECT CONTROL TARAMPS functionalities consult in its manual on the website.

Connection examples – Ceiling speaker
Examples to until 12 loudspeakers 8 ohms each

For this kind of connection use cables with a minimum gauge of 1.5mm² for up to 40 meters. For long distances, consult the table on page 12 ‘‘Important recommendations’’. It’s necessary to make connections in parallel and series as shown in the example, to match impedance.

Term of warranty

Located at Rua Abílio Daguano, 274 Res. Manoel Martins – Alfredo Marcondes – SP, ZIPCODE 19.180-000, TARAMPS guarantees this product against defects in design, manufacture, assembly and / or jointly due to design flaws that make it inappropriate or unsuitable for the intended use, for a period of 12 months from the date of acquisition.
In case of a defect in the warranty period, TARAMPS is responsible for the repair or replacement of the device manufactured by it.

This warranty excludes:

• Products damaged by improper installation, water infiltration, violation by unauthorized persons;
• Torn or torn warranty seal;
• Cases where the product is not used under normal conditions;
• Defects caused by accessories, modifications or equipment attached to the product;
• The product shows damage due to falls, impacts or the action of agents of nature (floods, lightning, etc.);
• Costs of removing and reinstalling the equipment, as well as transporting it to the technical assistance station;
• Damage of any nature, resulting from product problems, as well as losses caused by interruption of use.

Technical assistance

We have technical assistance all over Brazil and we are always ready to answer your questions and needs.
To locate an electronic Taramps technical assistance near you, access our website:
www.taramps.com.br/pt/rede-de-assistances- tecnicas or contact the factory’s technical assistance department:

Taramps Eletronics
Rua Abílio Daguano, n 274
ZIPCODE: 19.180-000
Phones + 55 18 3266-4050 / +55 18 99749-3391 E-mail: service@taramps.com.br

Technical features

The values mentioned are typical and may change due to the tolerance of components or the manufacturing process.
For more information or questions visit our website or contact TARAMPS support.

Taramps reserves the right to modify the contents of this manual without prior notice and not to apply the modifications to units previously produced.

Manufactured by:
TARAMPS ELECTRONICS LTDA TAX ID: 11.273.485/0001-03 Highway: Julio Budisk, SN, KM 30 Alfredo Marcondes – SP
Made in Brazil

www.taramps.com.br

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>