LK-Direct Q10-Z 3 In 1 Wireless Charging Station User Manual

Wireless Charging Station
Use Manual

Please read the instructions carefully before using

Interpretations with graphs

Thanks for choosing us!
This is a 3 in 1 wireless charger that allows you to enjoy the fun of digital products easily.
Please kindly read the use manual before using and keep it for future reference.

Instructions

Method of operation

1. Connect the wireless charger and adapter , plug in the power supply
2. Place the devices to be charged in the corresponding charging position then it will start charging.

Product parameters

Input: 5V 3A; 9V 3A; 12V 2.25A
Output: Phone 5-15W
Watch 2.5W
Earphone 3 W

LED Indicator

Working condition| Phones| Watch| Earphone
Power on| Green light on for 3 seconds| Green light on for 3 seconds| Green light on for 3 seconds
Standby| turn off| turn off| turn off
Charging| Green Led
keeps on| Green Led
keeps on| Green Led
keeps on
Charging
Completed| turn off| turn off| Green Led
keeps on
FOD Er Error| Green
light flash| Green
light flash| Green
light flash

FAQ

1. If you re experiencing interrupted or slow charging, cheeck the following:
   (1) The back of your phone should not have any metal, pop sockets, or credit cards
   (2) Put the phone in the center of the charging surtace (this lets the charging coil in your phone line up with the one inside the wireless charger).
   (3) The wireless charging coil on Sony phones is located slightly below center.
   (4)Phone cases should be no thicker than 5mm for effective charging.
   (5) Check whether the adapter is QC3.0/QC2.0 fast charger.

2. If you’re failing to charge your device, please try out the following
   (1) Please restart your cell phone and test with other USB cables
   (2) Please check whether the indicator turns on or not.
   (3) Please check the adapter is QC3.0/QC2.0 or not, iPhone original adapter does not match the wireless charger.
   (4) Please check your Phone case thickness(<=5mm). Metal rings or magnetic pads will. not be available

3. If you’re using the wireless charger with the recommended
   QC3.0/QC2.0 adapter and have removed any potential charging obstructionns, but are still experiencing issues, try:
   (1) Replacing the cable connecting the wireless charger.
   (2) Rebooting your phone.
   (3) Unplug the adapter and reinsert.

4. Wireless charger’s compatible mobile phone models, TWS models and watch models:
   Work flawlessly with virtually any Qi-enabled phones, support Galaxy Buds/Buds+/Buds Pro/Buds Live and other compatible earbudswith wireless charging case, support Galaxy Watch 6/6 Classic/5/5 Pro/Watch 4/ Watch 4 Classic/Watch 3/Actiive 2/Active 1.

5. How can the watch charging module be used alone after disassembly?
   (1) It can be used by connecting a power bank through the Type-C port.
   (2) It can be used by connecting a computer through the Type-C port.
   (3) It can be used by connecting an adapter through the Type-C port.

Tips

1. Do not disassemble or throw into fire or water to avoid causing a short circuit.
2. Do not use the wireless charger in extremely hot humid or corrosive environment.
3. Do not use near magnetic bank cards or IC cards to avoid malfunctioning.
4. Keep out of reach of children and pets.
5. The images in this manual are sketch drawings of the actual product. The actual product might be slightly different.

Correct Disposal of this product

Waste Electrical Electronic Equipment)
This Marking shown on the product or its literature, indicate that it should not de disposed with other household wastes al the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should. contact either the retailer where they purchased this product, or their local government office, for details* where and how they can take this intern for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2)this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference In a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on ac rcuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio’ TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction,

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(l)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at a II times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>