scorpio-lk Tango Programmer Software Installation Guide
- June 9, 2024
- scorpio-lk
Table of Contents
Tango Programmer Software
Installation Guide
Preface
This program will install the latest version of Tango software, the procedure
requires internet connection.
Default installation directory is “C:/Scorpio-LK/Tango”. The setup allows
assigning user defined directory on any drive on which available is at least
1GB of free disk space.
DO NOT use Windows OS directories that require OS administrator privileges
escalation (like “Program Files”, “Program Files (x86),” “Windows”).
Regardless of the selected setup directory, the directory “C:/Scorpio-LK” will
be created, as it is necessary to keep some auxiliary files, but it requires a
low space of a disk (<50MB).
It is recommended to use the default installation directory (C:/Scorpio-LK)
Installation
Step1: Uninstall previous version
If you have never installed Tango software on your PC with a previously
released setup file, skip this step.
If Tango software was previously installed on the PC, default path is “C:/
Program Files /ScorpioLK/Fango” or “C:/ Program Files (x86) /Scorpio-
LK/Tango”, uninstall it through the uninstall executable. To find where Tango
software resides, right click on the Tango desktop shortcut icon > Properties
Open File Location.
The new version will be placed with another application id and with different directories structure. If you leave old installation on the PC, the OS may be confused with multiple executables, desktop shortcuts etc.
Step2: Installation
Download and launch InstallOnline.exe (for Windows 7, 8, 10 & I I) or
InstallOnlineXP.exe (for Windows XP & Vista) then follow its on screen
instructions and prompts.
After main Tango software is installed, you will be prompted to install the
required Microsoft Visual C++ libraries, which will initiate its interface. If
you have them installed on your PC, chose either Reinstall or Repair option.
Finally the setup will initiate Tango’s USB driver setup. Make sure that Tango
hardware is not yet plugged in the PC and press OK. For Windows OS 7, 8, 10 &
11 this will conclude the setup, after which connect Tango hardware and
Tango.exe (or its desktop shortcut) can be started.
If you have Windows OS XP, Vista, after driver installation the driver is only
pre-installed. To complete driver installation, plug Tango hardware to USB
port and wait the standard Windows dialog appears: “Found new device”. Click
the dialog and select “Install automatically”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>