smeg BC9N LOR Supreme Fridge User Manual
- June 3, 2024
- Smeg
Table of Contents
smeg BC9N LOR Supreme Fridge
To ensure the use of this appliance and your safety, please read the following instructions completely before operating this appliance.
GENERAL INFORMATION
Foreword
The purpose of this document is to provide important information regarding the
installation, use, and maintenance of the fridge. Before any operation, you
should read carefully the information contained in this manual.
The manufacturer assumes no liability for parts or labor coverage for component failure or other damages resulting from improper usage, installation of failure to clean and/or maintain the product as set forth in these instructions.
GENERAL USE
ATTENTION
The fridge is not designed for external (outdoor) placement or environments
that subject it to the actions of atmospheric agents (rain, direct sunlight).
The manufacturer is not responsible for damages resulting from the improper
use of the product.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- WARNING: Do not damage the refrigerant circuit.
- WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
Correct Disposal of this product
This marking indicates that this product should not be disposed of with
other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources.
To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Caution: risk of fire.
TESTING
The fridge is shipped and ready for use. The temperature control is preset
from the factory. As needed, the temperature control can be adjusted Clockwise
to make the product “Colder”, the control can be adjusted Counter Clockwise to
make the product “Warmer”.
The milk will be under 4 °C
We don’t recommend customer to adjust. Because the regulation too cold Setting
can cause the freezing of the products. The best cooling performance is
achieved if the unit is optimally filled and the air circulation inside the
unit is unobstructed by the products inside the refrigerator.
RESPONSIBILITY OF THE CUSTOMER
Ensure that the electrical outlet is connected effectively to the earth
(ground), suitable to provide the voltage indicated on the data plate. Make
sure that the fridge is placed on a level surface.
TECHNICAL DATA
MATERIALS AND REFRIGERANTS
Interior or exterior surfaces that come into contact with the products are
made of galvanized steel. Aluminum or non-toxic plastic materials. The
Refrigerant used is approved by government regulations. The type and quantity
of the gas charged, in the refrigeration unit, are indicated on the data
plate.
INSTALLATION
For safe proper operation, follow the manufacturer’s instructions reported in this section.
POSITIONING
The fridge must be placed in an adequately ventilated room. Keep away from
heat sources, such as radiators or air conditioning pipes. Allow free air
circulation to the refrigerator unit. The ambient temperature must not be
higher than 40 ° C. This appliance climate class is 3,4,5.
Testroom climateclass| Drybulb temoerature·c| Relative humiditv%| Dewpoint’C|
Waterweightin drvaira/ka
---|---|---|---|---
0| 20| 50| 9.3| 7.3
1| 16| 80| 12.6| 9.1
2| 22| 65| 15.2| 10.8
3| 25| 60| 16.7| 12
4| 30| 55| 20.0| 14.8
5| 40| 40| 23.9| 18.8
6| 27| 70| 21| 15.8
7| 35| 75| 30| 27.3
Fridge L eveling: To provide the best performance the fridge must remain level.
ELECTRICAL CONNECTION
WARNING DO NOT USE EXTENSION CORDS
The fridge works on single-phase voltage (220-240V 50/60Hz) power supply. To
switch on the fridge, insert the plug into the outlet.
Ensure that:
The electrical outlet must be provided with an efficient ground, the voltage
and the frequency of the electrical line matches those indicated on the data
plate. If unsure about the efficiency of the ground, have your electrical
circuit checked by qualified technician. When the fridge is operating, check
that the supply voltage is not dropping or increasing under/over +10% the
rated voltage (187 Volts to 242 Volts). If the light is damaged, it must be
replaced with a same size, power and shape one. and must be replaced by the
manufacturer or its service agent.
The manufacturer is not responsible for damages or accidents arising from the misuse or disregard of electrical laws relevant to the country where the fridge is used.
MAINTENANCE
- Before cleaning the fridge always remember to unplug it.
- Unplug the fridge at the electrical outlet; never pull the service cord.
- Do not use sharp objects for cleaning.
- Clean the inside cabinet of fridge with a clean damp cloth or with neutral soap. Avoid damage by never using abrasive or flammable cleaning products.
- Clean the condenser at least once a month with a vacuum cleaner or a brush to eliminate the dust accumulation.
- Do not wash the fridge with direct, or high pressure water jets. When the relative humidity is more than 55%, there will be condensation on the door glass, it’s normal and unavoidable.
TROUBLE SHOOTING
Often problems that occur during normal operation can be resolved without the assistance of a specialized technician, verify the following:
- The appliance does not operate.
- Check that the plug is correctly into the electrical outlet.
- Verify that there is voltage at the electrical outlet
- The product is too warm.
- Check the setting of the thermostat. (See Testing Section)
- Check the closing of the door, and ensure door gasket seals.
- Check that the interior fan is operating, and not blocked.
- Check and clean the condenser
- The appliance is excessively noisy.
- Verify the equipment is level.
- Ensure that the equipment is not touching other equipment that could cause vibration.
Prepare to answer the following:
- The type of problem: (electrical, mechanical)
- The model, code and serial number of the fridgecan be found on the manufacturer label attached to the interior wall of the fridge.
WIRING DIAGRAM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>