Smeg SIM693WLDR 6 Zone Induction Cooktop User Manual
- October 30, 2023
- Smeg
Table of Contents
SIM693WLDR 6 Zone Induction Cooktop
User Manual
TOUCH CONTROLS
For precise cooking control, the zones are operated by an ergonomic slide control where you can choose to touch directly or finger-swipe up and down the 1 to 9 power levels with no ‘tapping’ required.
BOOST FUNCTION
Boost provides an additional surge of power for even more intense heat and is ideal for heating large quantities of water rapidly.
TIMER FUNCTION
The timer function can be used as an independent minute minder or as a switch- off timer for all zones each zone to ensure economical power usage. The timer can be set between 1 minute – 99 minutes.
RESIDUAL HEAT INDICATOR
If the induction cooktop surface is still hot a [H] is indicated on the control panel. Once the temperature falls to a safe level the indicator will go out and the cooktop can be easily cleaned.
EAN 8017709302559
| Dimensions | 900mmw x 53mmH x 510mmD |
|---|---|
| Finish | Black ceramic |
| Installation | Topmount |
| Cutout | 840mmW x 478-482mmD |
| Capacity | 5 zones |
Front left: 218 x 180 mm, 2100W – boost 2500W –
double boost 3000W
Rear left: 218 x 180 mm, 2100W – boost 2500W –
double boost 3000W
Centre: Ø 250mm, 2300W – boost 3000W
Rear right: Ø 210mm, 2300W – boost 3000W
Front right: Ø 160mm, 1400W – boost 2100W
Multizone left: 360 x 218 mm, 1500W – boost 1850W
Functions| Rapid heating
Grill function
Keep warm function
Pause function
Cleaning function
Auto-Vent 2.0 function
Timer| End of cooking acoustic alarm
Independent timer
Ignition| Automatic electronic
Controls| Slider control
Safety| Pan detection
Automatic cut-off
3-stage residual heat indicator
Control lock
Child safety
Power| 220 – 240V, 50/60Hz
32Amp Connection
Pan size| Automatic pan size recognition
Warranty| Two years of parts and labor
SAI4954D
90CM INDUCTION COOKTOP
PLEASE NOTE: drawings are not to scale. They are to assist only.
WARNING: technical specifications and product sizes can be varied by the
manufacturer without notice.
Cutouts for appliances should only be by physical product measurements. The
above information is indicative only.
smeg.com.au
ID210909
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>