TRAXION 3-100 Foldable Topside Creeper Instructions
- June 3, 2024
- TRAXION
Table of Contents
TRAXION 3-100 Foldable Topside Creeper
next generation ergonomic engine compartment access
Thank you for your purchase from TraXion Engineered Products.
The Topside Creeper NXT is the next generation of our Topside Creeper. It has
been updated with 30% more access around the engine compartment, a new folding
design that is 50% more compact and less than half the assembly time. TraXion
is proud to provide world class customer service to our most valued asset –
our customers. If you have any issues with assembly or the function of the NXT
please call us at 4 79-4 7 4-3460
You can also check out video instructions or contact us at
www.traxionproducts.com
Parts List
INSTRUCTIONS
-
STEP 1
Attach the Front Spreader and the Rear Spreader to the I-Base as shown below. -
STEP 2
Install the two Rear Locking Casters to the Rear Spreader. Install the two Front Non-Locking Casters to the Front Spreader using Lock Nuts. -
STEP 3
Install the Lower Ladder Section to the Rear Spreader. Ladder goes inside the two tabs on the spreader. Use 2 washers between the spreader tabs and the ladder. -
STEP 4
Install the Ladder Brace onto the two brackets on the Lower Ladder Section as shown. Pin the Ladder Brace to the I-Base using the Locking Pin. -
STEP 5
Pull out and rotate the height adjustment pins on the Lower Ladder Section to unblock the ladder channel. Slide the Upper Ladder Section into the channel of the Lower Ladder Section. -
STEP 6
Pull out and rotate the Deck locking spring pins on the Deck Frame. Install the deck frame to the Upper Ladder Section as shown.
-
STEP 7
Install the Padded Deck onto the Deck Frame using two Padded Deck Screws as shown.
-
STEP 8
Install the Utility Bag onto the front of the Deck Frame as shown