DELTACO SH-PO1, SH-P01-3P Smart Plug User Manual

: October 30, 2023
: DELTACO

Table of Contents

DELTACO SH-PO1, SH-P01-3P Smart Plug
Product Usage Instructions
INSTRUCTION
Install and use
Cleaning and maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DELTACO SH-PO1, SH-P01-3P Smart Plug

Product Information

The Maximum RF output (EIRP) is a technical specification that indicates the highest level of radio frequency (RF) power that the device can emit. EIRP stands for “Effective Isotropic Radiated Power” and is measured in decibels relative to a milliwatt (dBm).

Product Usage Instructions

When using the device, it is important to ensure that the RF output does not exceed the maximum EIRP level specified in the user manual. Exceeding this level may result in interference with other devices or violation of regulatory requirements. To avoid exceeding the maximum EIRP level, follow these instructions:

Refer to the user manual to determine the maximum EIRP level for your device.
Ensure that the device is operating within the appropriate frequency range and channel settings.
Position the device in a location that allows for optimal signal transmission and reception.
Avoid using the device near other electronic devices or sources of interference.
If you experience any issues with signal strength or quality, refer to the troubleshooting section of the user manual or contact customer support for assistance.

Thank you for choosing Deltaco!

INSTRUCTION

On/off/reset button
LED indicator for on/off status

Reset
Press and hold about 6 seconds for reset. LED flashes quickly.

Install and use

Download and install the app “Deltaco smart home” from Apple App Store or Google Play Store on your mobile device.
Launch the app “Deltaco smart home”,.
Create a new account or log in to your existing account.
Tap “+” to add the device.
Choose category and then the type of product from the list.
Connect the device to power.
If the LED/lamp does not flash: Reset the device.
If the status indicator flashes: Confirm in the app.
Confirm the Wi-Fi network and password.
Enter the device name.
If you want to add the product to Google Home or Amazon Alexa, search for “Deltaco Smart Home” in the Google Home or Amazon Alexa app and login to your Deltaco Smart Home account. You might need to choose “discover devices” or add the product manually in the Google Home or

Amazon Alexa app before you can use it.

Add service to Google home
Add the device to google home.
Add the service “Deltaco Smart Home”.
Add device to Amazon Alexa
Use the menu “Skills & Games” and search for “Deltaco Smart Home”. Enable the app and login.
Use discover to add the device.

Cleaning and maintenance

Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
Clean the outside of the device using a soft cloth.

Support
More product information can be found at www.deltaco.eu.
Contact us by e-mail: help@deltaco.eu.

SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows:
Hereby, DistIT Services AB declares that the radio equipment type wireless device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: All DoC’s can be found the product’s specific website, to access it go to: https://www.deltaco.se/produkter/xx (just change xx to the article number, for example https://www.deltaco.se/produkter/TWS-111) Then click on the tab “Info/Certifikat”.