allen roth CHL7CH Seren 5 Light Chrome Modern Contemporary Tiered LED Hanging Pendant Light Instruction Manual

allen roth CHL7CH Seren 5 Light Chrome Modern Contemporary Tiered LED

Hanging Pendant Light

Thank you for purchasing this Allen + Roth product. We’ve created these easy- to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
Note: You must refer to the full manual online for the complete safety information, care instructions, troubleshooting and warranty.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 866-439-9800, 8 a.m. – 8 p.m., EST, Monday – Sunday. You can also contact us at [email protected].

SAFETY INFORMATION

• Please read and understand this entire manual before attempting to assemble, operate or install the product.
• Failure to do so could lead to electrical shock, fire or other injuries that could be fatal.

DANGER

• DO NOT connect this fixture to an electrical system that does not provide a means for equipment grounding.
• Never use a fixture in a two-wire system that is not grounded.
• Installing a fixture into an electrical system not have a proper grounding means could cause serious injury or death.
• DO NOT connect the bare or green insulation fixture ground wire to the black (HOT) current-carrying wire or the white (NEUTRAL) house wire.
• Connection of the bare or green fixture ground wire to the black or white house wires could cause serious injury or death.
• DO NOT damage or cut the wire insulation (covering) during the installation of the fixture.
• DO NOT permit wires to contact any surface having a sharp edge. To do so may could cause serious injury or death.

WARNING

• All electrical connections must be in agreement with local codes and ordinances, the National Electric Code (NEC) and ANSI/NFPA 70-1999.
• Contact your municipal building department to learn about your local codes, permits and/or inspections. Risk of fire – most dwellings built before 1985 have supply wire rated for 140 °F. Consult a qualified electrician before installation.
• To avoid personal injury, gloves may be necessary while handling fixture parts with sharp edges.

CAUTION

• TURN OFF ELECTRICITY at the circuit breaker box before beginning installation by switching the circuit breaker off.
• If you are not sure the lighting system has a grounding means, DO NOT attempt to install this fixture.
• Contact a qualified, licensed electrician for information regarding the proper grounding methods as required by the local electrical code in your area.
• All fixtures must be mounted to an outlet box that is supported by the building structure.
• If a dimmer control switch is used with this fixture, obtain professional advice to determine the correct type to use as well as the electrical rating required.
• Before installation is complete, carefully check all screws, bolts and nuts on the fixture to ensure that they are secure.

FCC STATEMENT

Note: The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference;
2. this device must accept any interference received, including interference that may cause undesired operation.

Distributed by

• Litex Industries Inc., 3401 W Trinity Blvd, Grand Prairie, TX, 75050; 1 800-527-1292
• The total wattage for this fixture is 24 watts; do NOT tamper with or attempt to repair the LED component of fixture

FEELING CONFIDENT? START YOUR NEXT PROJECT

• Visit Lowes.com for more information.

WARNING

• DO NOT suspend any fixture by the house wires.
• A fixture must always be mounted directly to an outlet box or to a mounting strap that is first attached to the outlet box.
• Suspending a fixture by the house wires and wire connectors could result in the fixture falling, with the possibility of personal injury, electrical shock or fire.
• To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this light fixture are designed to accept only one 12-gauge house wire and two lead wires from the light fixture.
• If your house wire is larger than 12-gauge or there is more than one house wire to connect to the corresponding fixture lead wires, consult an electrician.
• To reduce the risk of damage to the fixture, DO NOT use power tools to assemble any part of the fixture.

PREPARATION

• Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list.
• If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 30

TOOLS REQUIRED (NOT INCLUDED)

PACKAGE CONTENTS

HARDWARE CONTENTS

Note: Hardware shows actual size.

INSTALLATION OVERVIEW

• Turn off power source

• Save D for later use.

• Make sure the outlet box can support 35 lbs. hanging weight.

• If you wish to change the cord length, loosen the plastic piece (do not remove it) and push up the metal collar. Pull the cord up through C. Release the metal collar to hold the cord at the desired length. Move the plastic piece back over the opening on the inside of C.

• Connect wiring: WHITE to WHITE, BLACK to BLACK, BARE/GREEN to BARE.

• Consult an electrician if wiring needs differ.

• Make sure no bare wire or wire strands are visible after making connections.

• Secure C with D.

Turn on the power source

CONTACT

• If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 866-439-9800,
• 8 a.m. – 8 p.m., EST, Monday – Sunday.
• You can also contact us at [email protected].

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>