aXtion CWA752MP Bold MP Plus 2 Case Installation Guide
- June 3, 2024
- axtion
Table of Contents
aXtion CWA752MP Bold MP Plus 2 Case Installation Guide
MP Plus 2 Module
Removal
Remove cover starting at one corner.
Installation
-
Insert iPad into hard frame.
-
Insert the corner of the frame nearest the camera into the silicone cover.
-
Insert the rest of the frame in to the cover.
-
Insert each silicone tab tightly into its corresponding slot in the plastic frame to ensure the case is water-resistant.
DISCLAIMER for aXtion® Bold Military Grade Certified Cases
Congratulations on the purchase of your new aXtion Bold case from The Joy
Factory Inc!
BEFORE USE READ ALL INSTRUCTIONS CAREFULLY. IMPROPER USE OF THE CASE COULD
RESULT IN DAMAGE TO YOUR DEVICE.
This aXtion Bold case is designed only for the device type listed on the box.
Thus it is only intended for and only warrantied for proper use with that
specific tablet and not for use with another device type. Because different
generations of tablets have different specifications, please refer to the
packaging for your aXtion Bold case to determine whether your tablet will be
compatible with the case you have purchased.
If you are not certain whether the device you intend to use with the aXtion
Bold case is compatible with the tablet model you have, please contact the
company from which you purchased the device or the manufacturer of the device
to determine whether it is a model supported by this aXtion Bold case.
If the aXtion Bold case is damaged or not functioning properly for any reason;
immediately stop use. The Joy Factory expressly disclaims all liability and
all warranties, whether expressed or implied, for use of an aXtion Bold case
that has been damaged for any reason. The case is covered under our one year
manufacturing warranty and can be replaced free of charge for any
manufacturing defects. If you believe the case has a manufacturing defect,
cease use immediately and contact The Joy Factory by email at
support@thejoyfactory.com or by telephone at
949-216-8888, Monday through Friday,
9:00 a.m. to 5:00 p.m., Pacific Standard Time. The Joy Factory will not
replace an aXtion Bold case that is damaged, other than one with a
manufacturing defect, The Joy Factory is not liable to replace or pay for
replacement of your device or any additional items which may be damaged from
use of a case with manufacturing defects.
The Joy Factory disclaims all liability for lost aXtion Bold cases and any
device stored in a lost case.
Do not use your aXtion Bold case with any other case or bumper. Use of an
additional case or bumper will hinder the military grade certification, and
The Joy Factory disclaims all liability from such use and will void any and
all warranties, expressed or implied.
Any alteration to your aXtion Bold case will void any and all warranties and
guarantees, whether expressed or implied, and The Joy Factory disclaims any
and all liability for damages arising from use of an altered aXtion Bold case.
Contact us support@thejoyfactory.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>