axtion CWM302 Bold Mp-Series Silicone Case-12.3-Inch Microsoft Surface Pro Installation Guide
- June 3, 2024
- axtion
Table of Contents
axtion CWM302 Bold Mp-Series Silicone Case-12.3-Inch Microsoft Surface Pro
Installation Guide
Introduction
Removal
Remove silicone cover from the hard frame starting at one corner.
Installation Instruction
-
Insert iPad into hard frame.
-
Insert the corner of the hard frame nearest the camera into the silicone cover.
-
Insert the rest of the hard frame into the silicone cover.
-
Insert each silicone tab tightly into its corresponding slot in the hard frame to ensure the case is water-resistant.
Cleaning Instruction
We recommend cleaning the case after every use cycle.
Most hospital-grade disinfectant wipes with high alcohol concentrate are safe
to use on the aXtion Bold case.
A few that we recommend are:
- Sani-Cloth AF3
- Cavi-Wipes
- Clorox Healthcare Bleach Germicidal Wipes
- Oxivir TB
Follow these steps:
- Clean the back cover with a hospital-grade wipe, using a small stroking motion. Pay special attention to the crevices.
- Use a new hospital-grade wipe to clean the front cover and screen protector.
- Let the case air dry before using.
Internal cleaning may be done as needed following these steps
-
Remove the tablet from the case and set aside.
-
Clean the inside back cover with a hospital-grade wipe, using a small stroking motion.
Pay special attention to the crevices. -
Use a new hospital-grade wipe to clean the inside front cover and screen protector.
-
Let the case air dry before putting the tablet into the case.
-
Hospital-grade disinfectant wipes may have more detailed instructions for use.
Please refer to the manufacturer’s instructions. -
These instructions are only for cleaning cases by The Joy Factory.
To clean the tablet, please refer to the manufacturer’s instructions.
DISCLAIMER for aXtion Bold Military Grade Certified Cases
Congratulations on the purchase of your new aXtion Bold case from The Joy
Factory Inc!
BEFORE USE READ ALL INSTRUCTIONS CAREFULLY. IMPROPER USE OF THE CASE COULD
RESULT IN DAMAGE TO YOUR DEVICE.
This aXtion Bold case is designed only for the device type listed on the box.
Thus it is only intended for and only warrantied for proper use with that
specific tablet and not for use with another device type. Because different
generations of tablets have different specifications, please refer to the
packaging for your aXtion Bold case to determine whether your tablet will be
compatible with the case you have purchased.
If you are not certain whether the device you intend to use with the aXtion Bold case is compatible with the tablet model you have, please contact the company from which you purchased the device or the manufacturer of the device to determine whether it is a model supported by this aXtion Bold case.
If the aXtion Bold case is damaged or not functioning properly for any reason;
immediately stop use.
The Joy Factory expressly disclaims all liability and all warranties, whether
expressed or implied, for use of an aXtion Bold case that has been damaged for
any reason.
The case is covered under our one year manufacturing warranty and can be
replaced free of charge for any manufacturing defects.
If you believe the case has a manufacturing defect, cease use immediately and
contact
The Joy Factory by email at
support@thejoyfactory.com or by telephone at
949-216-8888,
Monday through Friday, 9:00 a.m. to 5:00 p.m., Pacific Standard Time.
The Joy Factory will not replace an aXtion Bold case that is damaged, other
than one with a manufacturing defect,
The Joy Factory is not liable to replace or pay for replacement of your device
or any additional items which may be damaged from use of a case with
manufacturing defects.
The Joy Factory disclaims all liability for lost aXtion Bold cases and any
device stored in a lost case.
Do not use your aXtion Bold case with any other case or bumper.
Use of an additional case or bumper will hinder the military grade
certification, and The Joy Factory disclaims all liability from such use and
will void any and all warranties, expressed or implied.
Any alteration to your aXtion Bold case will void any and all warranties and
guarantees, whether expressed or implied, and The Joy Factory disclaims any
and all liability for damages arising from use of an altered aXtion Bold case.
Future Information
