TESLA TSL-DREAM-SIREN Smart Sensor Siren User Manual
- June 3, 2024
- Tesla
Table of Contents
- Packing List
- Appearance and Components Basic Functions
- Product Features
- Power-On and External Power Supply
- Basic Functions
- Product Installation
- Technical Parameters
- INFORMATION ABOUT DISPOSAL AND RECYCLING
- EU DECLARATION OF CONFORMITY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TESLA TSL-DREAM-SIREN Smart Sensor Siren
Packing List
Check if the product is in good condition. Make sure it contains the below accessories.
-
1X Alarm Siren
-
3M sticker x1
-
power adapter x1
-
QC PASS certificate x1
-
User manual x1
-
Two expansion tubes and two screw
Appearance and Components Basic Functions
Product appearance
Product Features
- Sound & flash alarm for 100 dB .
- Low voltage monitoring and indication function.
- Periodically sends online reports to the gateway.
- Anti-tamper design. 5
- Wireless transmission, easy to install. 6
- ABS material housing, radiation-resistant and heat-resistant.
Power-On and External Power Supply
- First time power on, LED is on for 3 s.
- When battery power, press the OFF/ON button for more than 3s to turn OFF/ON.
- Network setting /exit setting: press both volume + and volume- at the same time for more than 5s.
Note: When receiving alarm signal from gateway, the status indicator will flash and the buzzer beeps. To clear the alarm, please operate on App.
Basic Functions
- Network setting: press the volume + and volume-buttons at the same time, the red light will be on for 5s. Release the button to set network, LED flashes for network setting. LED is always on for 3s then off. If failed, the LED will be off directly.
- Volume adjustment: When the siren alarms, press the volume + and – to adjust.
- Anti-tamper switch. When siren is removed, siren will alarm. To cancel the alarm, please press anti-tamper switch for 3 times, or operate on App.
- LED Indicator Power on/off: LED is on for 3s, buzzer beeps twice. Low voltage: LED flashes every 20s. Network setting: LED flashes. Power off: Buzzer beeps once. Network timeout: LED changes from flash to off. Network setting success: LED is on for 3 seconds and off.
Installation Position and Precautions
- Install the product on an indoor tile, gypsum wall, or painted wood.
- Building materials, such as reinforced concrete, will shorten the wireless communication distance.
Product Installation
Add the siren to the gateway as an accessory based on the gateway user manual.
-
Rotate the mounting base counterclockwise to remove it from the product.
-
Power on the product.
-
Use expansion tube and screws or a 3M sticker to fix the mounting base on a wall. Rotate the product clockwise into the mounting base. If you use a 3M sticker, ensure that the installation surface is smooth and stable. Clean the surface before mounting to prevent the product from falling off.
-
Connect the siren to the power adapter.
Technical Parameters
Wireless Technology | ZigBee |
---|---|
Working Voltage | 12 V (power adapter) |
Transmission Frequency | 2.4 GHz |
Working Temperature | -10°C to +55°C |
Built-in Battery | 3.7 V lithium battery |
Standby Time | Over 24 hours |
Relative Humidity | < 90% |
Dimensions | <;2′.>80 mm x 34.5 mm |
INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accordance with all local and European regulations at the designated collection points which hold the appropriate authorization and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimize impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorized service centre or local authorities.
EU DECLARATION OF CONFORMITY
Hereby, Tesla Global Limited declares that the radio equipment type TSL-SEN-
SIREN is in compliance with EU directives. The full text of the EU declaration
of conformity is available at the following internet address: tsl.sh/doc
Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n
Frequency band: 2.412 – 2.472 MHz Max.
radio-frequency power (EIRP): < 20 dBm
Manufacturer
Tesla Global Limited
Far East Consortium Building,
121 Des Voeux Road Central
Hong Kong
Hong Kong www.teslasmart.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>