STAGE ZERO Volta 40 Portable DC UPS User Manual

STAGE ZERO Volta 40 Portable DC UPS

Product Information

The Stage Zero Volta 40 UPS is a power backup device that comes with a built- in adapter allowing for a wide AC voltage range of 85Vac-265Vac. It has high capacity lithium batteries that provide long backup time to most digital devices. The UPS also features Power over Ethernet (POE) that can transmit data and power simultaneously to simplify wiring and set-up. Additionally, the UPS has intelligent circuit design with over-charging, over-discharging, and short circuit protections.

Thank you for choosing our Stage Zero Volta 40 UPS. Before using this UPS, please read through the User Manual carefully to ensure you obtain the best possible performance.

Stage Zero Volta 40 DC UPS package

1. Volta 40
2. AC power cable
3. Volta 40 output cables
4. User Manual

Features

1. Built-in adapter allows for a wide AC voltage range 85Vac-265Vac.
2. Built-in, high-capacity lithium batteries provide long backup time to loads.
3. Suitable for most digital devices.
4. Power over Ethernet (POE) can transmit the data and power at the same time to simplify wiring and set-up.
5. 5V USB output can charge mobile phones, PSPs, PDAs, iPods and MP4 players etc…
6. Intelligent circuit design with over-charging, over-discharging and short circuit protections.

Operation

1. In order to avoid over-discharging of the lithium batteries, please restart the UPS when the AC is available after low battery cutoff.
2. Before connecting the loads to the UPS, it is important to check their nominal working voltage, current and polarity, which you can find on their original adapters.
3. Please ensure the UPS battery is fully charged before connecting it to the loads.
4. The output power of this model is controlled by total power capacity. The total power of the loads connected to all the ports can’t exceed the maximum output power of the UPS. Otherwise, all the output ports will close, and the UPS will shut down automatically once the status light flashes for 5 seconds. In this situation, please remove the excess loads.
5. Press and hold the power button for 2-3 seconds to switch the UPS on. The output voltage of POE ports can be selected between 15V and 24V by moving the POE voltage switch. Once plugged into a power supply, the status light turns green to indicate charging. 100% means full of charge. While the UPS is charging, the power indicator lights will show the battery capacity moving from 25% to 50%, 75% and 100% respectively. When disconnected from the power supply, the status lights turn red for battery backup mode, and the power indicator lights will turn off one by one from 100%, 75%, 50% to 25%. When the light of 25% is flashing, it means that the battery power is very low – simply press and hold the power button for 2-3 seconds to turn off the UPS and stop output voltage.
6. The USB provides stable charging to 5V digital products with their original charging cables.
7. The UPS shuts down automatically when the battery runs low but will restart output power when it begins charging.
8. If the UPS not used for a long time, please keep it full of charge and in a cool place. If it won’t turn on after being in storage for too long, plug the UPS into a power supply to charge until the status lights turn green. We recommend charging the UPS battery at least once a month.

Components

1. 100% Battery capacity LED indicator
2. 75% battery capacity LED indicator
3. 50% battery capacity LED indicator
4. 25% battery capacity LED indicator
5. Work status indicator
6. ON/OFF Switch
7. Reset button for POE(Except DC1018C/ DC1018/ DC1036)
8. Ethernet output interface
9. LAN Ethernet interface
10. Output voltage Selector
11. USB (5Vdc) output port.
12. AC input socket
13. Output port(5V)
14. Output port(12V)
15. Output port(9V)

Specifications

• Model Volta 40
• Input 85-265Vac/50-60Hz
• Output
  • USB 5V/2A
  • DC 5V/2A
  • DC 9V/2A
  • DC 12V/2A
  • POE 15V/1A
  • POE 24V/1A
• Output power (Max.) 36W
• Quantity & Capacity of battery 2000mAh* 4 (LifePO4)
• Operate temperature -10℃ ~ 40℃
• Humidity 10%-90%RH
• Dimension 16010533mm
• Net Weight 0.42kg

Warnings

1. Double-check the working voltage, current and polarity of the loads before connecting them to the UPS, then choose the corresponding voltage.
2. Please ensure the UPS is fully charged before initial use.
3. Avoid dropping or hitting the UPS. Don’t try to open and repair the unit yourself.
4. Don’t submerge the UPS in water or get it wet.
5. Don’t dispose of the UPS in fire or heat.
6. Don’t use the UPS in any flammable environments.
7. Keep the UPS out of reach of children.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>