tp-link Archer AX55 AX3000 Dual Band Gigabit Wi-Fi 6 Router Installation Guide
- June 4, 2024
- tp-link
Table of Contents
Quick Installation Guide
Wi-Fi 6 Router
Set up with videos:
Scan QR code or visit
https://www.tp-link.com/support/setup-video/#wi-fi-routers
1 Connect the Hardware
- Unplug the power to turn off your modem, if any, and remove the backup battery if it has one.
- Place the router horizontally and orient the antennas vertically.
If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable to the router’s WAN port, and then follow steps 3 and 4 to complete the hardware connection.
*Image may differ from actual product.
1 Connect the powered-off modem to the router’s WAN port with an
Ethernet cable.
2 Power on the modem, and then wait about 2 minutes for it to
restart.
3 Connect the power adapter to the router and turn on the router.
4 Verify that the hardware connection is correct by checking the
following LEDs.
Power On 2.4GHz On 5GHz On Internet On
Note: If the 2.4GHz LED and 5GHz LED are off, press and hold the WPS/Wi-Fi button on the back for more than 2 seconds. Both the LEDs should turn solid on.
2 Set Up the Network
Method ONE: Via TP-Link Tether App
1. Download the Tether app.
or
→
Scan for Tether Tether
2. Open the Tether app and log in with your TP-Link ID.
Note: If you don’t have an account, create one first.
3. Tap the + button in the Tether app and select Router > Wireless Router. Follow the steps to complete the setup and connect to the internet.
Enjoy the internet !
Method TWO: Via a Web Browser
1. Connect your device to the router wirelessly or with an Ethernet
cable.
The default wireless network names (SSIDs) and password are printed on the
label at the bottom of the router.
2. Launch a web browser, and enterhttp://tplinkwifi.net or
http://192.168.0.1 in the address bar. Create a password to log in.
Note: If the login window does not appear, please refer to Q1 of Need
Help? in this guide.
3. Follow the step-by-step instructions to set up the internet connection and register for the TP-Link Cloud service.
Enjoy the internet !
Button Explanation
WPS/Wi-Fi Button
Press the button for 1 second, and immediately press the WPS button on your
client to start the WPS process.
Press and hold the button for more than 2 seconds to turn on or off the
wireless function of your router.
Reset Button
Press and hold the button for about 6 seconds until the Power LED blinks to
reset the router to its factory default settings.
USB Applications
With the USB port, it’s easy to share files and media with multiple devices. Visit https://www.tp-link.com/app/usb to learn more about the USB applications.
-
Local Storage Sharing
Share files from the USB drive with devices on your home network -
Media Server
Play media from the USB drive on your computer and smart devices -
Remote Access
Access the USB drive when you are away from home
Need Help?
Q1. What should I do if I can’t access the web management page?****
– Reboot your router and try again.
– If the computer is set to a static IP, change its settings to obtain an IP
address automatically.
– Verify that http://tplinkwifi.net is correctly entered in the web browser.
Alternatively, enter http://192.168.0.1 or http://192.168.1.1 in the web
browser.
– Use another web browser and try again.
– Disable and enable the network adapter in use.
Q2. What should I do if I can’t access the internet?
– Power off your modem for about 5 minutes, then power it on and check the
internet. If your modem has more than one Ethernet port, keep other ports
unconnected.
– Check if the internet is working normally by connecting a computer directly
to the modem via an Ethernet cable. If it is not, contact your internet
service provider.
– Log in to the web management page, and go to the Network Map page to
check whether the internet IP address is valid or not. If it’s valid, go to
Advanced > Network > Internet, click Advanced Settings , select Use
the Following DNS Addresses , set the primary DNS to 8.8.8.8, and set the
secondary DNS to 8.8.4.4. If it is not, check the hardware connection or
contact your internet service provider.
– For cable modem users, connect a computer directly to the router using an
Ethernet cable, log in to the router’s web management page and go to
Advanced > Network > Internet > MAC Clone. Select Clone Current Device
MAC and click SAVE. Then reboot both the modem and the router.
Q3. What should I do if I forget my wireless password?
– If you have not changed the default wireless password, it can be found on
the label at the bottom of the router.
– Connect a computer directly to the router using an Ethernet cable. Log in to
the router’s web management page at http://tplinkwifi.net, and go to the
Wireless page to retrieve or reset your wireless password.
Q4. What should I do if I forget my web management page password?
– If you are using a TP-Link ID to log in, click Forgot password on the
login page and then follow the instructions to reset it.
– Alternatively, press and hold the Reset button on the back for about 6
seconds until the Power LED blinks. Then visit http://tplinkwifi.net to
create a new login password.
To communicate with TP-Link users or engineers, visit https://community.tp- link.com to join TP-Link Community.
For technical support, the user guide and more information, please visit https://www.tp-link.com/support
Email techwriter@tp-link.com.cn to give suggestions.
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use any other chargers than those recommended.
- Do not use damaged charger or USB cable to charge the device.
- Do not use the device where wireless devices are not allowed.
- Adapter shall be installed near the equipment and shall be easily accessible.
©2021 TP-Link 7106509198 REV2.0.0
References
- 域名售卖
- Trying to configure the Router? | TP-Link
- TP-Link Community
- TP-Link Product Support - Wireless Networking Equipment Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>