FeelTech FY3200S Series Fully Numerical Control Dual Channel Function-Arbitrary Waveform Generator User Manual
- June 3, 2024
- FeelTech
Table of Contents
FeelTech FY3200S Series Fully Numerical Control Dual Channel Function-
Arbitrary Waveform Generator
Introduction of the instrument
This manual applies to each mode of FY3200S series DDS Function Signal Generator. In the series, the last two digits “xx” represent the upper limit frequency value (MHz) of Sine Wave for each mode. For example, FY3225S，“25” means the upper limit frequency of Sine Wave is 25MHz. The instrument adopts large scale CMOS integrated circuit and high speed microprocessor. The internal circuit adopts active crystal oscillator as benchmark. So the signal stability is greatly strengthened. Surface mounting technology improves interference immunity and operational life span. It has Dual-channel DDS signal output, includes Sine wave, Square wave, Triangle wave, Sawtooth wave and user-defined waveform. The amplitude, offset and phase can be controlled. Meanwhile, it has TTL electric level output, External frequency measurement, counter and sweep functions including Linear sweep and Logarithmic sweep. Both the sweep frequency and time can be set arbitrarily. It’s the ideal instrument for electronic engineering, laboratories, production lines, teaching and scientific research.
Excellent technical indexes and function features:
- Sampling rate up to 250 MSa/s.
- Built-in arbitrary waveform with 250 MSa/s sampling rate.
- 4 downloadable 2048 dots arbitrary waveform memories
- With 12 bit wide waveform generator, the output waveform can be more delicate with low distortion.
- Fully numerical control. It can display and numerical control amplitude, offset, frequency, duty cycle of current signal output and phase difference of two channels. And dual-channel arbitrary integer multiples of the frequency output when no phase error signal phase drift;
- Each function can be adjusted by host computer.
- Preinstalled 17 common waveforms.
- High frequency accuracy: magnitude 10－6
- High resolution: Full range frequency resolution can be 10 mHz.
- Both main and subsidiary wave duty cycle are adjustable separately (0.1%~99.9%）.
- All range continuously adjustable, digital directly setting.
- High waveform accuracy: The output waveform synthesized by function calculation is of high accuracy and low distortion.
- Arbitrary waveform: User can load arbitrary waveform according to the need.
- Sweep Function: Linear sweep and Logarithmic sweep. Starting and stop points can be set optionally.
- Save function: 20 sets of parameters defined by the users can be saved and loaded anytime.
- Operation mode: Button and knob controlled with LCD1602 display, digital set directly or knob adjusted continuously.
- Highly reliable: Large scale integrated circuit, Surface mounting technology, reliable and durable.
- Frequency measurement: Frequency of internal / external signal can be measured through built-in 100MHz frequency meter.
- Follow function: Built-in parameter follow function covering frequency, amplitude, offset, duty cycle, waveform etc. for user’s convenience.
- Trigger output function: User can choose manual trigger, external trigger or CH2 trigger to control the main output to output waveforms of specified periodicity. This periodicity can also be defined by the user.
- FSK frequency shift keying and ASK amplitude shift keying signal output.
Technical Specification
Unless specified, all specifications can be guaranteed if the following two conditions are met.
- The generator has passed self-inspection.
- The generator has been working continuously for at least 30 minutes under the specified temperature (18℃~28℃).
All the specifications are guaranteed unless those marked with “typical”
Frequency
Model| FY3200S
-6MHz
| FY3200S
-12MHz
| FY3200S
-20MHz
| FY3200S
-24MHz
| | FY3200S
-25MHz
|
Sine| 0~6MHz| 0~12MHz| 0~20MHz| 0~24MHz| 0~25MHz
Square| 0~6MHz| 0~6MHz| 0~6MHz| 0~6MHz| 0~6MHz
Ramp/Triangle| 0~6MHz| 0~6MHz| 0~6MHz| 0~6MHz| 0~6MHz
Pulse| 0~6MHz| 0~6MHz| 0~6MHz| 0~6MHz| 0~6MHz
TTL/CMOS| 0~6MHz| 0~6MHz| 0~6MHz| 0~6MHz| 0~6MHz
Arbitrary wave| 0~6MHz| 0~6MHz| 0~6MHz| 0~6MHz| 0~6MHz
Resolution| 0.01Hz(10mHz)
Accuracy| ± 5×10-6
Stability| ±1×10-6/ 3 Hours
Phase Range| 0~359°
Phase Resolution| 1°
Waveform Characteristics
Waveforms| Sine, Square, Triangle (Ramp), Arbitrary, Sawtooth, Pulse, Noise,
etc.
Waveform Length| 2048Points
Sampling Rate| 250MSa/s
Vertical Resolution| 12 Bits
Sine
| Harmonic
Suppression
| ≥45dBc(<1MHz);≥40dBc(1MHz~20MHz);
Total Harmonic
Distortion
| <0.8% (20Hz~20kHz,0dBm)
Square
| Rise/Fall Time| ≤20ns
Overshoot| ≤7.5%
Duty Cycle| 0.1%~99.9%
Sawtooth| Linearity| ≥98% (0.01Hz~10kHz)
Output characteristics
Amplitude (50Ω)| 10mVpp~20Vpp (No load)
Amplitude Resolution| 10mV
Amplitude Stability| ±0.5%/ 5 Hours
Amplitude flatness| ±5%(<10MHz)；±10%(>10MHz);
Waveform Output
Impedance| 50Ω±10%（Typical）
Protection| All channels can work more than 60 seconds when the load is
short-circuited.
Dc Offset
Offset Range| ±10V
Offset Resolution| 0.01V
TTL Output| Dual-channel TTL electric level synchronize with CH1 and
CH2.
Phase differences are adjustable.
Electrical Level
Amplitude
| >3Vpp
Fan-out| >20 TTL Load
Rise/Fall Time| ≤20ns
CMOS Output
Low Electric Level| <0.3V
High Electric Level| 1V~10V
Rise/Fall Time| ≤20ns
External Measurement
Frequency Meter| Range| 1Hz~100MHz (Gate Time 1S)
Counter| Range| 0-4294967295
Voltage Input Range| 2Vpp~20Vpp
Sweep| Only CH1 available
Sweep Type| Linear or Logarithm
Sweep Objects| Frequency
Sweep Time| 1S~999S/Step
Sweep Range| Starting position and Finishing position can be set arbitrarily.
General Specifications
Display| Mode| LCD1602 in English
Save & Load| Amount| 20
| Position| 01 to20 (SAVE P_ON FREQ for default value)
---|---|---
Interface
| Type| USB to Serial interface.
Communicati
ng Speed
| 9600bps
Power| Voltage
Range
| AC85V~AC260V
Buzzer| Can be turned on/off by setting.
Environment| Temp.：0~40℃ Humidity：﹤80%
Dimension| 200mm（Length）X190mm（Width）X90mm（Height）
Weight| Net Weight: 750g， Gross Weight: 900g